High Build Varnish 2056 - Pettit (Kop Coat) - Pettit Paint

High Build Varnish 2056 - Pettit (Kop Coat) - Pettit Paint
Your Price: $30.16
Save: $21.83
(41% Off $51.99)
Part # 2056Q ValueShip™ Eligible
SHIPS TODAY!* if ordered in 6 hrs 56 mins.
Pettit Paint

Product Families

Pettit High Build Varnish 2056
    Features:Recommended for the highest quality workWithstands severe weather conditions on salt or fresh water.Contains highest level of UV absorbers …
    Features:
    • Recommended for the highest quality work
    • Withstands severe weather conditions on salt or fresh water.
    • Contains highest level of UV absorbers and light stabilizers for long-term gloss retention.

    Similiar product to Bak-V-Spar Varnish 2053 but with a heavier build. Can build up the base with 20% less work than a traditional varnish. Contains all the benefits of UV protection and great durability.

    General Description:
    Considered the traditional standard in the marine industry, this varnish is highly regarded for its reliable service, versatile application and tough yet flexible durability. It is blended with phenolic resin and tung and linseed oils for excellent performance. It's warm, light amber blue will enhance the rich, classic brightwork appearance.

    Easypoxy Hi-Build Varnish contains an ultraviolet light filter in conjunction with a hindered amine light stabilizer to screen the sun's damaging rays for longer life. Easypoxy Hi-Build Varnish has the highest build and film depth per coat, as well as excellent abrasion resistance and high gloss.

    Application Information
    Do not shake varnish. Stir gently before application, being careful not to introduce air bubbles into the varnish. Easypoxy Hi-Build Varnish may be applied by brush or conventional spray. Thinning is not normally required although on very warm days use Pettit 120 Brushing Thinner at 5-10% by volume to ease brushing and maintain good flow and levelling. When spraying, use Pettit 121 Spraying Thinner up to 20% by volume. Spray an even, wet coat to minimize orange peel. Do not apply Easypoxy Hi-Build Varnish on extremely humid days or when rain is threatening. Do not apply in the late afternoon when working outdoors as the wet film may be adversely affected by dew.

    Surface Preparation
    Wood must be clean, dry and properly prepared prior to varnishing. When sanding wood, always sand with the grain. Use a vacuum, air hose, or tack rag to remove all traces of sanding residue. Follow all surface preparation steps carefully, avoiding shortcuts. Inadequate surface preparation will virtually assure inadequate varnish performance.

    Disclaimer: Charts apply to Pettit products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.

    The performance of marine paint depends on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.

    By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.

    Based On 1 Review | Write Review
    hi built
    by Peter from Nobel, Ontario on August 28, 2011
    goes on easy with brush. lasts long, does not peel
    Was this review helpful?
    This product ships in 1 business day.

    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    * Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies
    Sale-a-palooza ends July 31st - Shop now for the best selection and savings!