Honda PWC Impeller Accessories

Solas Tool Sea-Doo / Kawasaki
Solas Tool Sea-Doo / Kawasaki
Your Price: $7.99
Save: $4.00
(33% Off $11.99)
Part # WR001 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 22 hrs 31 mins.
Alum. Impeller Seal (Solas)
Alum. Impeller Seal (Solas)
Your Price: $10.99
Save: $10.00
(47% Off $20.99)
Part # SLA010 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 22 hrs 31 mins.
No Reviews | Write Review
Solas

Impeller Accessories & Installation Guide
Honda Impeller Accessories & Installation Guide
  1. Remove and separate the whole jet pump from the PWC.
  2. Remove the trail cone (or cap) from the stator.
  3. Hold the rear end of the shaft with a bench vise. Remove the impeller with an impeller wrench. Turning counter clockwise will loosen the impeller.
  4. Visually inspect thread on shaft & impeller for debris or damage. Apply grease or anti-seize on the thread before installation.
  5. Screw in the impeller by hand; be careful of the sharp edges of the impeller. Tighten with the impeller wrench. If the impeller feels too tight or not threaded properly, unscrew the impeller, clean and check the thread.
  6. Assemble the pump and put it back on the PWC.
*This installation guide is suggested for reference only. Please refer to your service manual for procedure details.

Average Customer Review for Solas Tool Sea-Doo / Kawasaki
Based On 1 Review | Write Review
WR001
by Denis from Candiac, Quebec on May 27, 2012
fast delivery very good tool
Was this review helpful?
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
Sale-a-palooza ends July 31st - Shop now for the best selection and savings!