Hydrocoat Ablative Antifouling Boat Paint, Black, Quart - Pettit (Kop Coat) - Pettit Paint

Hydrocoat Ablative Antifouling Boat Paint, Black, Quart - Pettit (Kop Coat) - Pettit Paint
Your Price: $56.19
Save: $29.70
(34% Off $85.89)
Part # 1840Q ValueShip™ Eligible
SHIPS TODAY!* if ordered in 7 hrs 28 mins.
No Reviews | Write Review | Ask Question
Pettit Paint

Product Families

Pettit Hydrocoat Ablative Water-based Antifouling Paint
    Features:Multi-season Ablative Minimal Odor, Easy Clean-up with Water Used on all new Sea-Ray Boats Ablative finish reduces coating buildup through …
    Features:
    • Multi-season Ablative
    • Minimal Odor, Easy Clean-up with Water
    • Used on all new Sea-Ray Boats
    • Ablative finish reduces coating buildup through controlled erosion.
    • Complies with all air pollution (VOC) regulations
    • Contains PTFE which reduces drag, resulting in an easily burnished, slick film for maximum hull speed.

    The ideal combination of high-speed performance and durability with environmental responsiveness. This product uses water to effectively transfer the paint to your boat. The end result is multi-season protection with easy clean-up and minimal odor.

    Hydrocoat is formulated with a 40% cuprous oxide and is tough enough to withstand frequent trailering, launching and beaching. Used by Sea-Ray on all new boats.

    All paint colors shown here are for guidance only. Due to differences in screen displays that are beyond our control the colors on these pages cannot be guaranteed to match the actual color in the can.

    GENERAL DESCRIPTION
    Hydrocat is a waterbased antifouling bottom coating designed to give protection against algae, barnacles and all types of marine and fresh water fouling. It's waterbased formula results in an effective product that is easy to apply, environmentally responsive (exceeds even the most stringent air pollution regulations) and is safer to use. It withstands frequent trailering, beaching and launching while offering excellent antifouling protection.

    APPLICATION INFORMATION
    Hydrocoat contains cuprous oxide. As a result, there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. If mixing is going to be done with a wooden paddle or an electric drill mixer, pour off half of the liquid from the top of the can into another can and then properly mix in any settled pigment; then remix the two parts together thoroughly. Adhere to all application instructions, precautions, conditions, and limitations to obtain optimum performance. Refer to individual labels and tech sheets for detailed instructions when using associated products, etc. When spraying, do not thin Hydrocoat more than 10% (12 ounces per gallon) or inadequate paint film thickness will occur and premature erosion of the finish will be likely.

    SURFACE PREPARATION
    Coating performance, in general, is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate preparation of surfaces will virtually assure inadequate coating performance.

    MAINTENANCE
    No antifouling paint can be effective under all conditions of exposure. Man made pollution and natural occurrences can adversely affect antifouling paint performance. Extreme hot and cold water temperatures, silt, dirt, oil, brackish water and even electrolysis can ruin an antifouling paint. Therefore, we strongly suggest that the bottom of the boat be checked regularly to make sure it is clean and that no growth is occurring. Lightly scrub the bottom with a sponge or very soft brush to remove anything from the antifouling paint surface. Scrubbing is particularly important with boats that are idle for extended periods of time. The self-cleaning nature of the coating is most effective when the boat is used periodically. Burnishing of the surface to create a slicker finish should be done with 400-600 grit wet-or-dry paper after the coating has dried for seven (7) days.

    Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.

    The performance of marine paint depends on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.

    By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.

    Ask a question for
    Question & Answer Guidelines
    This product ships in 1 business day.

    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    * Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies