- Multi-season Ablative
- Minimal Odor, Easy Clean-up with Water
- Used on all new Sea-Ray Boats
- Ablative finish reduces coating buildup through controlled erosion.
- Complies with all air pollution (VOC) regulations
- Contains PTFE which reduces drag, resulting in an easily burnished, slick film for maximum hull speed.
The ideal combination of high-speed performance and durability with environmental responsiveness. This product uses water to effectively transfer the paint to your boat. The end result is multi-season protection with easy clean-up and minimal odor.
Hydrocoat is formulated with a 40% cuprous oxide and is tough enough to withstand frequent trailering, launching and beaching. Used by Sea-Ray on all new boats.
Hydrocoat Ablative Antifouling Paint - Pettit Paint
|Product Type||Water Based, Multi Season, Ablative|
|Key Attributes|| •Simply the best water-based ablative multi-season protection |
•Ablative, self polishing technology eliminates sanding and paint build-up
•Environmentally friendly, easy to apply and cleanup with soap & water
•Unlimited dry time to launch, can be painted in the fall or winter
|Technology & Formulation||Water Based, Copolymer, Ablative|
|Substrates||Fiberglass, Wood, Steel, Lead, Bronze. (For more specific instructions per substrate, please refer to the product data sheet provided below.)|
|Mixing Instructions||Thoroughly mix - can be thinned up to 10% to ease application|
|Method||Brush, Roller, Airless or Conventional Spray|
|Application Temperature||50°F - 90°F|
|Number of Coats||2 minimum with additional coat at the waterline recommended.|
|Recoating Information (Recoat/Relaunch)|| DRY TIME (HOURS): To Recoat / To Launch |
90°F: 1.5 / 12
70°F : 3 / 16
50°F: 6 / 48
|Repaint Information||Pressure wash upon haulout, lightly sand, clean and reapply. (Refer to the Pettit Antifouling Compatibility Chart found below for more information.)|
Associated Products From Pettit Paint:
- Tie Coat 6627
- Pettit Protect 4700/4701
- Bio Blue 92
- Fiberglass Dewaxer D95
Hydrocoat Product Data Sheet PDF
Pettit Antifouling Compatibility Chart
MSDS for Hydrocoat Blue*
MSDS for Hydrocoat Green*
MSDS for Hydrocoat Red*
MSDS for Hydrocoat Black*
*Disclaimer:Information on this material is subject to change without notice. Please visit the corresponding manufacturer's website for updates.