All Inboard & Outboard Engine Paint

Sort by Price : Low to High | High to Low
1 Items
 
Mercury Marine Phantom Black Spray Paint
    Phantom Black Paint. Gloss Black, used on Mercury Black Max props, Mercury outboards, Mercruiser sterndrives & inboards.
    List price: $9.15
    Your price:
    $7.70
    Full StarFull StarFull StarHalf StarEmpty Star(4)
    In stock
    View Details
    Sort by Price : Low to High | High to Low
    1 Items
     
    Boating Know How
    boat drive paint

    How to Paint your Boat Drive (Video)

    See how to paint your boat drive, presented by Interlux. ... read more



    Video Transcript

    I'm Jim Seidel from Interlux. We're here in a boatyard looking around talking about problems people have painting the bottoms of their boat.

    A couple things about Drives, this one, you can see the paint has worn away. The zincs are old and needs new paint. Give a light sanding. You don't have to sand it all the way down. Put a coat of Primocon on and two coats of Pacifica Plus. It's really good antifouling paint for aluminium outdrives or any kind of outdrive because it doesn't contain any copper. It works really well as far as antifouling protection. That will be two coats there and brushing on.

    Brushing on is always better than spraying it on because you'll get a much heavier coat of paint, the paint will last longer, and they give you better antifouling protection.
    read less
    Cover Zincs when painting

    Cover your Boat Zincs When Painting (Video)

    The importance of covering up your zincs when painting your boat. ... read more



    Video Transcript

    I'm Jim Seidel from Interlux. We're here in a boatyard looking around talking about problems people have painting the bottoms of their boat.

    One thing that I think is a really good practice is to cover over the zincs. Put the new zincs on and cover them over so you don't put the paint on the zincs or under the zincs. They're in good contact with the metal and you're not painting over them. They still should put some primer down before they repaint.

    You can see on the back here, the antifouling worked really well except on the metal. But that is a really good practice to cover over the zinc before you paint.
    read less