Bottomkote® is ideally suited for cruising and power boats that desire very good, dependable protection. Soft, eroding finish enables easy cleaning and minimal paint film build up.
Traditional antifouling protection for most areas
Soft eroding bottom paint for cruising boats
It has a universal application over all types of properly prepared bottom paints and surfaces (except Aluminum).
Below the waterline
GRP/FRP Lead Steel Wood Cast Iron
Suitable for Aluminum:
Suitable for High Fouling Areas:
Number of Coats:
Airless Spray Brush Conventional Spray Roller
Recommended No. of Coats
Practical Coverage (sq. ft/Gal)
Below Water Systems: One-Part Products
These systems provide a good level of protection.
How Much AntiFouling Paint Do I Need?
Determining how much antifouling you will need is fairly simple. You can calculate the area to paint by multiplying the length of your hull (LOA) by the beam and multiply by 0.85 (LOA x B x 0.85 = Area). Then divide the area by the coverage of the paint you’ve chosen to determine how many quarts per coat you will need.
Refer to the reference chart below for another quick estimate of how much antifouling paint is required for two coats.
No Review for Interlux Bottomkote Antifouling Boat Paint, Red, Gallon