Interlux Thinner, Solvent & Cleaner
The iBoats Experience
Boats for SaleBrowse thousands of constantly-updated listings and search by location, brand, and boat type See more...
AdviceConnect with our expansive community and tap into the knowledge base of the most dedicated boaters around. See more...
Shop ProductsBrowse and search for hundreds of thousands of boat parts, accessories, and supplies to suit your every need.
216 Special Thinner is a fast evaporating solvent which, when added to specified paint coatings, improves drying in cold climates and facilitates spray application. Also recommended for removing sanding residue from hull bottoms, wiping down bare aluminum clean and for the general clean-up of paint equipment. For use with most single part topside and antifouling paints.
|Product||Brush||Spray||Cleanup||% Thinner Required|
|Perfection Polyurethane||2333N||2316N||2333N or 2316N||As Needed 5-10%||As Required 25-35% Max|
|Toplac Silicone Copolymer||333||216||216||As Required 10% Max||10-15%|
|Brightside®||333||216||216||As Required 10% Max||10-15%|
|Yacht Enamel||333||216||216||As Required 10% Max||10-15%|
|Varnishes||333||216||216||As Required 10% Max||5-10%|
|Bottom Paints (conventional)||216||216||216||10% 1st coat wood only||As Required 10% Max|
|Micron® Extra, Micron® CSC, Trilux® 33™, Trilux®, Tri-lux® II, Ultra||433||216||433 or 216||As Required 10% Max||As Required 20-30% Max|
|Fiberglass Bottomkote® ACT||216||216||216||10% 1st coat wood only||As Required 10% Max|
|Micron® Optima||6216||6216||Water||As Required 10% Max||As Required 10% Max|
|Fiberglass Bottomkote® Aqua||6216||6216||Water||As Required 10% Max||As Required 10% Max|
|VC® Offshore||355||355||355||10% 1st coat wood only||As Required 10% Max|
|VC 17m® Extra, VC 17m®||V172||V172||V172||10-15% Max||10-15% Max|
|These are only general requirements. Thinner quality and type vary depending upon temperature and specific application.|
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.