Interprotect® 3000/3001was developed for spray application but can be brushed and rolled
A unique, high solids, two-part epoxy coating, developed to protect old and new fiberglass hulls from water absorption, which can lead to hull blistering.This product meets the most restrictive V.O.C. regulations in the country
Interprotect 3000/3001 is a high solids (80%) epoxy coating developed to protect old and new fiberglass hulls from water absorption which can potentially lead to hull blistering. Due to the high solids content of this product, it is possible to apply a complete barrier system and anti-fouling paint within a 2-3 day period.
Prevention is Better Than Cure The importance of having a moisture-free
hull cannot be overemphasized. The drier
the laminate, the lighter the hull, the better
the performance, the more efficient fuel use
and the longer the gelcoat life. A boat hull that
has absorbed moisture will also sit lower in the
water than intended and will reduce the
responsiveness of the boat.
The InterProtect® System was designed to
repair hulls which have experienced gelcoat
blistering. However, the best time to attack hull
blistering is before it happens.
Taking preventative action before a problem
occurs will greatly reduce the likelihood of an
expensive repair and increase resale value.
If you’re buying a new boat, protect your
investment with the InterProtect® System
before it ever goes in the water!
InterProtect® is a unique two-part epoxy
designed to reduce the potential of water
absorption by fiberglass hulls. InterProtect® is
unique among epoxies because it has
Micro-Plates®, a protective barrier within its
film to slow down water permeation.
Technically, InterProtect® Micro-Plates® provide
millions of overlapping microscopic plates that
create a barrier similar to shingles on a roof.
These overlapping Micro-Plates® eliminate any
direct path for water migration and also
improve the sag resistance of the epoxy
making application easier.
Important Steps in the Repair of Gelcoat Blisters
1
Proper Preparation of the Gelcoat
This includes getting all of the antifouling paint off and removal of as much gelcoat as
necessary to get the hull dry (i.e. the entire gelcoat or just small areas). A professional,
who has looked at your boat, should make this determination.
2
Drying of the Hull
This is the most critical step in the process. If you do not get the hull dry it will re-blister.
We recommend a comprehensive washing and drying procedure.
3
Application of Epiglass® HT9000 Resin
This solventless epoxy seals up the laminate and fills any cloth that has been voided of
resin. This should be done before using fillers to fill the voids.
4
Application of Interprotect® 2000E or Interprotect® 3000
These epoxies are used as a water barrier to minimize the possibility of reoccurrence
of damage.
Dry Times
32°F
41°F
59°F
73°F
Touch Dry
16 hrs
8 hrs
6 hrs
2 hrs
Hard Dry
48 hrs
20 hrs
10 hrs
4 hrs
Pot Life
8 hrs
5 hrs
4 hrs
2.5 hrs
Overcoated By
Min.
Max
Min.
Max
Min.
Max
Min.
Max
Fiberglass No Sand Primer
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interfill 830
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interfill 830 Fast Cure
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interprotect 2000E
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interprotect 3000/3001
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Note: Interprotect 2000E or Fiberglass No Sand Primer must be used prior to Antifouling paint.
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product’s suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com’s option.
Off White Interprotect 3000, Gallon - Interlux
Part # 3000/01G Features:
Contains Micro-Plates® for extra protection
Can be applied at temperatures down to 32°F (0°C)
Anticorrosive substrate primer for metals
Interprotect® 3000/3001was developed for spray application but can be brushed and rolled
A unique, high solids, two-part epoxy coating, developed to protect old and new fiberglass hulls from water absorption, which can lead to hull blistering.This product meets the most restrictive V.O.C. regulations in the country
Interprotect 3000/3001 is a high solids (80%) epoxy coating developed to protect old and new fiberglass hulls from water absorption which can potentially lead to hull blistering. Due to the high solids content of this product, it is possible to apply a complete barrier system and anti-fouling paint within a 2-3 day period.
Prevention is Better Than Cure The importance of having a moisture-free
hull cannot be overemphasized. The drier
the laminate, the lighter the hull, the better
the performance, the more efficient fuel use
and the longer the gelcoat life. A boat hull that
has absorbed moisture will also sit lower in the
water than intended and will reduce the
responsiveness of the boat.
The InterProtect® System was designed to
repair hulls which have experienced gelcoat
blistering. However, the best time to attack hull
blistering is before it happens.
Taking preventative action before a problem
occurs will greatly reduce the likelihood of an
expensive repair and increase resale value.
If you’re buying a new boat, protect your
investment with the InterProtect® System
before it ever goes in the water!
InterProtect® is a unique two-part epoxy
designed to reduce the potential of water
absorption by fiberglass hulls. InterProtect® is
unique among epoxies because it has
Micro-Plates®, a protective barrier within its
film to slow down water permeation.
Technically, InterProtect® Micro-Plates® provide
millions of overlapping microscopic plates that
create a barrier similar to shingles on a roof.
These overlapping Micro-Plates® eliminate any
direct path for water migration and also
improve the sag resistance of the epoxy
making application easier.
Important Steps in the Repair of Gelcoat Blisters
1
Proper Preparation of the Gelcoat
This includes getting all of the antifouling paint off and removal of as much gelcoat as
necessary to get the hull dry (i.e. the entire gelcoat or just small areas). A professional,
who has looked at your boat, should make this determination.
2
Drying of the Hull
This is the most critical step in the process. If you do not get the hull dry it will re-blister.
We recommend a comprehensive washing and drying procedure.
3
Application of Epiglass® HT9000 Resin
This solventless epoxy seals up the laminate and fills any cloth that has been voided of
resin. This should be done before using fillers to fill the voids.
4
Application of Interprotect® 2000E or Interprotect® 3000
These epoxies are used as a water barrier to minimize the possibility of reoccurrence
of damage.
Dry Times
32°F
41°F
59°F
73°F
Touch Dry
16 hrs
8 hrs
6 hrs
2 hrs
Hard Dry
48 hrs
20 hrs
10 hrs
4 hrs
Pot Life
8 hrs
5 hrs
4 hrs
2.5 hrs
Overcoated By
Min.
Max
Min.
Max
Min.
Max
Min.
Max
Fiberglass No Sand Primer
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interfill 830
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interfill 830 Fast Cure
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interprotect 2000E
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interprotect 3000/3001
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Note: Interprotect 2000E or Fiberglass No Sand Primer must be used prior to Antifouling paint.
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product’s suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com’s option.
Off White Interprotect 3000, Quart - Interlux
Part # 3000/01Q Features:
Contains Micro-Plates® for extra protection
Can be applied at temperatures down to 32°F (0°C)
Anticorrosive substrate primer for metals
Interprotect® 3000/3001was developed for spray application but can be brushed and rolled
A unique, high solids, two-part epoxy coating, developed to protect old and new fiberglass hulls from water absorption, which can lead to hull blistering.This product meets the most restrictive V.O.C. regulations in the country
Interprotect 3000/3001 is a high solids (80%) epoxy coating developed to protect old and new fiberglass hulls from water absorption which can potentially lead to hull blistering. Due to the high solids content of this product, it is possible to apply a complete barrier system and anti-fouling paint within a 2-3 day period.
Prevention is Better Than Cure The importance of having a moisture-free
hull cannot be overemphasized. The drier
the laminate, the lighter the hull, the better
the performance, the more efficient fuel use
and the longer the gelcoat life. A boat hull that
has absorbed moisture will also sit lower in the
water than intended and will reduce the
responsiveness of the boat.
The InterProtect® System was designed to
repair hulls which have experienced gelcoat
blistering. However, the best time to attack hull
blistering is before it happens.
Taking preventative action before a problem
occurs will greatly reduce the likelihood of an
expensive repair and increase resale value.
If you’re buying a new boat, protect your
investment with the InterProtect® System
before it ever goes in the water!
InterProtect® is a unique two-part epoxy
designed to reduce the potential of water
absorption by fiberglass hulls. InterProtect® is
unique among epoxies because it has
Micro-Plates®, a protective barrier within its
film to slow down water permeation.
Technically, InterProtect® Micro-Plates® provide
millions of overlapping microscopic plates that
create a barrier similar to shingles on a roof.
These overlapping Micro-Plates® eliminate any
direct path for water migration and also
improve the sag resistance of the epoxy
making application easier.
Important Steps in the Repair of Gelcoat Blisters
1
Proper Preparation of the Gelcoat
This includes getting all of the antifouling paint off and removal of as much gelcoat as
necessary to get the hull dry (i.e. the entire gelcoat or just small areas). A professional,
who has looked at your boat, should make this determination.
2
Drying of the Hull
This is the most critical step in the process. If you do not get the hull dry it will re-blister.
We recommend a comprehensive washing and drying procedure.
3
Application of Epiglass® HT9000 Resin
This solventless epoxy seals up the laminate and fills any cloth that has been voided of
resin. This should be done before using fillers to fill the voids.
4
Application of Interprotect® 2000E or Interprotect® 3000
These epoxies are used as a water barrier to minimize the possibility of reoccurrence
of damage.
Dry Times
32°F
41°F
59°F
73°F
Touch Dry
16 hrs
8 hrs
6 hrs
2 hrs
Hard Dry
48 hrs
20 hrs
10 hrs
4 hrs
Pot Life
8 hrs
5 hrs
4 hrs
2.5 hrs
Overcoated By
Min.
Max
Min.
Max
Min.
Max
Min.
Max
Fiberglass No Sand Primer
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interfill 830
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interfill 830 Fast Cure
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interprotect 2000E
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Interprotect 3000/3001
20 hrs
3 mo
10 hrs
2 mo
7 hrs
6 weeks
3 hrs
1 mo
Note: Interprotect 2000E or Fiberglass No Sand Primer must be used prior to Antifouling paint.
Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.
The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product’s suitability for your particular purpose or application.
By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com’s option.
No Review for Off White Interprotect 3000, Gallon - Interlux
This product typically leaves our warehouse in 1 business day.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
General Policy
We work hard to provide you with the best value in product prices and shipping charges, and to get your order to you in a timely, safe, and convenient manner. Internet sales involve the cost of getting the product to you, and shipping carriers base that cost on the size and weight of the package, plus the distance the package travels from our warehouse to your door. We keep our product prices low, negotiate low shipping charges from our carriers and pass those savings on to you, and we don't charge sales tax (except for residents of Utah), so your order from iboats.com is the best value for all your boating needs.
Our standard shipping method is UPS ground, which typically takes 2-5 additional transit days after the order has left our warehouse, depending on your delivery address. We also offer other shipping options, including expedited delivery, and the actual delivery date will depend on the shipping options you choose.
Shipping to Canada
Most products sold by iboats.com can be purchased and shipped to Canada. Some restrictions apply to certain items, such as hazardous materials, over-weight products, and the method of shipping. Available product lines, shipping rates and fees may vary depending on the delivery address for your order.
Currently, iboats.com offers ground shipping to all Canada provinces. Our Canadian brokerage service accelerates your orders through the Customs clearance process and facilitates the delivery of your order through Canada Post or the best method based on your shipping address. We do not currently offer expedited shipping methods to Canada.
At iboats.com we want to simplify your transaction and give you a pleasing purchasing experience so you'll come shop with us again and again. We therefore calculate all the duties, taxes, and other fees specific to Canadian orders and show you the total landed cost of getting the order to your door. There are no hidden fees and will be no surprise COD charges when the package is delivered to you.
Order History & Tracking
We provide several methods to track your order and keep you informed of your order status and expected delivery date. After completing an iboats.com purchase transaction, an account will automatically be created for your provided email address. You'll receive an email from iboats.com Customer Service informing you of your new User Account and the many benefits it provides. If you don't wish to have an iboats.com Account with password, do nothing and your account won't be registered; however, you can respond to the instructions in the email and easily register your account and setup a password. This will allow you to sign in to your account by choosing the Order Status link from any iboats.com page, where you can browse your order history and track the status of all your orders - tracking numbers are displayed that link to the delivery carrier's tracking webpage.
If you have provided your email address during checkout, we will also email you your invoice, which includes a link for tracking your order and viewing the current status of your order. Refer to your invoice email and tracking link any time you wish to track the status of your order
Return Policy
We're here to help! We understand that sometimes a product you purchase just doesn't work out, which is why we want to make the return process as easy as possible for you. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends.
Unless specified otherwise, an item(s) may be returned within the first 30 days after the item(s) is shipped to you. Merchandise must be in new, unopened and unused condition with all original packaging in good condition; plus parts, accessories, manuals, and/or warranty cards included. You will need to receive a return authorization number (RA #) as well as instructions from our Customer Service Department.
If needed, we recommend starting your return online to receive a Return Authorization Number(RA #). Returned items(s) that do not have an RA # will not be accepted.
Warranty
iboats.com has a 30-day return policy. After 30 days of your purchase, the manufacturer of the product(s) will need to be contacted for a warranty claim. If you need assistance finding the manufacturers number please contact our Customer Service Department.
Returns for Canadian Customers
Canadian customers, please be careful when placing your order; iboats.com does not accept any return merchandise on Canadian orders unless the merchandise you received was defective, damaged, or an error was made by iboats.com. In such cases, return the merchandise within 30 days of the original shipping date for a full refund.
iboats.com Low Price Guarantee – Quick and Simple
We have the best selection of products at the best prices, guaranteed.
Nobody beats our prices. If you find a current lower price on an identical, in-stock item from any nationally recognized marine Internet retailer, we will match the price. iboats.com works hard to bring you everyday low prices plus knowledgeable product advice, great in-stock selection, and outstanding customer service. Our guarantee covers it all, and if you’ve found a better price let us know and we’ll match it and work hard to make you a satisfied iboats customer for life.
Quick: Call 1-800-914-1123
Simple: Have the lower competitive price info ready, as outlined below.
Buy with Confidence – We Won’t Be Beat!
Here’s what you need to supply us to verify a lower price:
The retailer’s name and URL website address of where you found the lower price.
The product name, manufacturer, model number, price, and shipping charges.
Electronics products, trolling motors, and outboard engines are not available for price matching.
30-day Guarantee
Buy now with confidence, knowing that should there ever be a lower price from any nationally recognized U.S. marine Internet retailer for 30 days after your purchase, iboats will match that price and refund you the difference. Or we’ll match the price before your purchase. The price considered will be the advertised price plus shipping and handling charges.
Qualifying items must be verifiable on the Internet or through a current printed advertisement. Items must be identical, in-stock new products and not sold through a membership club or auction site or any of the following offers, such as free offers, multiple discounts like “buy one, get one at half off”, special orders, special bundles, clearance sales, mail-in rebate offers, typographical errors, private sales, non-retail websites, promo discounts, or limited-time offers. All price matching is at the discretion of iboats.com and is subject to change at any time. iboats reserves the right to limit quantities. Price-match products are not eligible for special offers or discounts.
iboats.com – The Leader in Price Buster Confidence!
Please be aware of the following order dates below to have your items have the best chance of delivery by December 24. Shipping options apply to in-stock items only, and not made-to-order products such as boat covers and bimini tops. Mail handlers are extremely busy this time of year, therefore we cannot guarantee delivery before Christmas of any items. For the most up-to-date shipping information, please refer to the estimated delivery time specified in the shopping cart and checkout process.
