Johnson / Evinrude / OMC 390055 replacement parts

Blowout
Save 30% Off.
Carburetor Kit for Johnson/Evinrude 390055 439076 398526 434888 435443 392550, GLM 40570 - Sierra
Sale-a-palooza Price: $16.19
Save: $6.99
(30% Off $23.18)
Part # 18-7046 ValueShip™ Eligible
Replaces OEM part #
  • OMC 435443
  • OMC 434888
  • OMC 398526
  • OMC 392550
  • OMC 390055
Mallory Carb Kit 9-37100
Mallory Carb Kit 9-37100
Your Price: $18.99
Save: $4.19
(18% Off $23.18)
Part # 9-37100 ValueShip™ Eligible
Replaces GLM #:40570
Replaces Original Equipment Manufacturer(OEM):Johnson/Evinrude
Replaces Original Equipment Manufacturer # (OEM #):439076 / 435443
Fits Application:V-4 & V-6
Sierra
carb kits
by Gary from Tunnelton, West Virginia on February 20, 2012
everything fit as advertized and the directions were clear and to the point.
(5 of 5 people found this review helpful)
Was this review helpful?
wrong part
by Jerry from Richfield Springs, New York on August 05, 2012
even though your site lead me to this part it was not the correct one for my motor I had to send it back and buyrthe cooret part from another retailer.
(1 of 2 people found this review helpful)
Was this review helpful?
Adequate
by Steven from Stillwater, Minnesota on July 09, 2012
Bought this before I tore the carbs down. Turns out the carbs were very clean which is surprising after the engine sat in the back yard with a tarp over it for 4 years. All it really needed was the fuel lines replaced. But, I did the carbs too with this kit. At least now I know they are good instead of wondering. Kit was fine
(1 of 2 people found this review helpful)
Was this review helpful?
Carb kit
by Matthew from North Pole, Alaska on June 11, 2012
Came with everything that was expected.
(1 of 1 people found this review helpful)
Was this review helpful?
needle seat
by Aaron from Mcallan, Texas on April 25, 2012
The problem is that the needle and seat is so crudely made that even as a new part they stick so bad that they do not function at all.I had to reuse the old ones!I intend to return them...
(1 of 1 people found this review helpful)
Was this review helpful?
gaskets
by David from North Bend, Washington on January 02, 2012
bought 3 of these 2 of the needle and seat assy were no good had to use old ones also the bowl gaskets were so hard that i had a hard time getting them to form to the plastic bowls im sure if the bowls were metal like the older ones it would be fine but you cant blame omc for that
(1 of 1 people found this review helpful)
Was this review helpful?
Sierra carb kit
by Keith from Marianna, Arkansas on July 30, 2011
Great replacement for stock carb kits. evrything is needed except the o-rings that go on the bowl drain screws. Only one is provided but it requires two to do the job. Other than that good quality.
(1 of 1 people found this review helpful)
Was this review helpful?
"O" rings too small
by Edward from Mount Horeb, Wisconsin on June 09, 2011
The "O" rings supplied for the idle jet plugs are too small in cross section to seal. I had to use R-02 size rings from a O ring kit.
(1 of 1 people found this review helpful)
Was this review helpful?
Excellent!!!!!
by Wooten from Collierville, Tennessee on September 30, 2010
Fast efficient transaction and quick delivery. Item recieved as described.
(1 of 1 people found this review helpful)
Was this review helpful?
150 hp 1984 Johnson carb kit
by Brett from Walker, Louisiana on May 27, 2014
Worked great. Fast delivery! Great service
Was this review helpful?
Works
by Carson from Villa Rica, Georgia on November 06, 2013
Came sooner than expected. I rebuilt the carbs on a 1973 Evinrude Starflite 85HP, the motor hasn't ran in 20 years. It runs great now. Thanks IBoats!
Was this review helpful?
Couldn't be happier
by Mike from JANESVILLE, Minnesota on September 16, 2013
Easy to find on webpage, Price was cheaper then any other site, easy ordering and shipping price didn't gouge my wallet at all. I received what was expected and I couldn't be happier. Top notch quality product. I will definitely order from iboats again and will be telling my Minnesota friends.
(0 of 1 people found this review helpful)
Was this review helpful?
Good fit.
by Zeth from Trimble, Missouri on June 13, 2013
The carb kit fit well and seems to be made from a quality material.
(0 of 1 people found this review helpful)
Was this review helpful?
Good Carb Kit
by James from Rock Hill, South Carolina on April 30, 2012
Best value I found anywhere. Fast shipping. Combined with the info found on the iBoats Forum pages, rebuilding the carbs was a breeze.
Was this review helpful?
Good kit
by Steve from Shorter, Alabama on April 17, 2012
Complete kit and shipped quickly. Rate it at a 99%
Was this review helpful?
carburetorr kit
by Robert from Amelia, Virginia on July 24, 2011
this kit do not have all the parts needed to totally rebuild a carburetor for a 112 h p evinrude it is missing two of the rubber o-rings and the needle seat threw gasket needs to be nylon
Was this review helpful?
Average Customer Review for Mallory Carb Kit 9-37100
Based On 4 Reviews | Write Review
Not as advertised
by Mark from New Market, Alabama on December 12, 2011
The product description led me to believe that the kit contained enough parts to complete a carb rebuild for a V-4 engine. A V-4 engine has 2 carbs. Only 1 carb can be repaired with this kit. I will have to order another kit. My complaint is with the product description not with the product itself.
(7 of 10 people found this review helpful)
Was this review helpful?
leaks
by Mark from Raleigh, North Carolina on July 19, 2013
As another reviewer noted, the seals for the carb bowl that come with this kit are fiber. When put into use, they get saturated with fuel and leak profusely. The seals that I took off were of a rubber type material. I'm now going to have to pull the carbs back off and buy a different brand kit or make my own gaskets. The rest of the kit seemed fine and works well, but this is a major issue.
(1 of 1 people found this review helpful)
Was this review helpful?
leaky gaskets
by Keith from Marianna, Arkansas on July 31, 2011
The bowl gaskets will not seal. they are made of paper and saturate causing fuel to leak from them. All other parts are complete.
(1 of 1 people found this review helpful)
Was this review helpful?
carb kit
by James from Waller, Texas on October 05, 2011
easy to use , even a caveman could do it
Was this review helpful?
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
Sale-a-palooza ends July 31st - Shop now for the best selection and savings!