Johnson / Evinrude / OMC 392061 replacement parts

Carburetor Kit with Float for Johnson/Evinrude 398729 396701 392061, GLM 40560 - Sierra
Your Price: $18.99
Save: $5.49
(22% Off $24.48)
Part # 18-7222 ValueShip™ Eligible
Replaces OEM part #
  • OMC 398729
  • OMC 396701
  • OMC 392061
Carburetor Kit for Johnson/Evinrude 396701 392061 398729, GLM 40560 - Sierra
Your Price: $16.99
Save: $8.09
(32% Off $25.08)
Part # 18-7042 ValueShip™ Eligible
Replaces OEM part #
  • OMC 398729
  • OMC 396701
  • OMC 392061
Sierra
Good Kit
by William from Aurora, Indiana on October 09, 2014
Kit had all the gaskets needed to rebuild the carbs.
Was this review helpful?
Complete Kit
by Charles from North Fort Myers, Florida on October 02, 2014
Kit had everything needed to get the job done.
Was this review helpful?
Just as OEM but cheaper
by Jon from Sweet Home, Oregon on August 03, 2014
Good quality product. Timely shipping and great pricing. I spent time shoppinh around for this product but ended up back here sin nce pricing, shipping and service were all top notch.
Was this review helpful?
Carb Kit
by Gilbert from Hague, Virginia on July 08, 2014
We purchased 2 kits one for each of the carbs. The kit is fairly normal, however, the packaging is a little confusing. It would be better if the needle valve, seat, gasket, and arbor pin were all packaged together. There was a drawing to give the setup of the float and was very useful. All in all, it is a good kit. Would like to include kit options with low speed needle-valve and spring.
Was this review helpful?
Great Kit
by Scott from Groveland, Florida on December 31, 2013
Fast shipping, Quality parts, Thanks
Was this review helpful?
Evenrude carb kit
by Richard from Paragould, Arkansas on November 09, 2013
Reasonable price, easy to find riff part and delivery as promised
Was this review helpful?
worked as expected
by Phillip from Dayton, Texas on October 16, 2013
this was my first outboard carb rebuild but i have rebuilt carbs before so i had no problem doing the job with the kit. the kit is designed for at least two different carbs which kind of throw me for a minute thinking i was missing something since the choosing process was pretty detail.
(1 of 1 people found this review helpful)
Was this review helpful?
Fast service
by Marjorie from Ottumwa, Iowa on October 10, 2013
Was shipped really fast and am very satisfied with the kit.
Was this review helpful?
Satisfied
by John from Bristol, Indiana on September 06, 2013
The kit plus a good carb cleaning made a dig difference in the way the motor ran. Not sure about one of the gaskets that came with the kit. It didn't appear to fit anything on my carb. I'm assuming that the kit covers a couple of different models. Otherwise a good kit and half the price of the local Marina. Good show guys.
Was this review helpful?
Carb kit
by Greg from Keokuk, Iowa on August 12, 2013
Fast service and the parts fit with no problems. Would use Iboats again for future orders.
Was this review helpful?
carburator kit
by Anthony from East China, Michigan on August 11, 2013
worked great and parts were right and well made
Was this review helpful?
excelent
by Tommy from Mt. Sidney, Virginia on August 10, 2013
my boat runs better than it ever has . Thanks
Was this review helpful?
Great kit
by Joseph from Montrose, Michigan on July 06, 2013
Turned my old gummed up carb into a gas spraying SOB. Installed easy.
Was this review helpful?
Good value.
by Gary from Plover, Wisconsin on May 26, 2013
Comes with everything you need... but instructions.
Was this review helpful?
carb rebuild kit for evinrude 25 1973
by Gail from Bethany, Illinois on August 18, 2012
I am pleased with this rebuild kit from Sierra. The instructions were easy to understand and the results was a perfect working carburetor.I am also very pleased with the short amount of time that it took to recieve this kit from you. Keep up the good work. Gail Allen
Was this review helpful?
Evinrude Carb Rebuild
by Keith from Douglasville, Georgia on August 08, 2012
Rebuilt two carburetors on my 48 HP Evinrude with these kits. Everything fit perfectly and carbs run great.
Was this review helpful?
great kit!
by Ronald from Piedmont, South Carolina on July 24, 2012
This is a well matched kit for a total rebuild of your small carb. The kit is priced low so you don't have to spend a lot to rebuild your own carb. Thanks i-boat, Ronnie
Was this review helpful?
Great product
by Jesse from Ukiah, California on July 19, 2012
All the needed parts were included in this kit plus some i didn't need too. Used for a 1969 Johnson 55ESL69C which had three carbs (bought 3 of these). Gaskets are quality material and all parts are close to OEM fit.
Was this review helpful?
johnsons carburetor kit
by James from Slidell, Louisiana on July 18, 2012
the kit had everything i needed.
Was this review helpful?
Carb Kit
by Murray from Lindale, Texas on July 10, 2012
The kits I recived were not the exact ones for my carbs but I was able to make them work.
Was this review helpful?
good kit
by Danny from Gray, Georgia on July 02, 2012
Good, fast service
Was this review helpful?
Carburetor Kit
by Judy from Lexington, North Carolina on May 30, 2012
This was just what we needed to get our boat back up to running like new. It is an older boat but we have always enjoyed it and with a grandson now big enough to take along, we couldn't risk being on the water and the boat not running properly. Thank you.
Was this review helpful?
Excellent Product
by Charles from Jackson, Tennessee on May 21, 2012
THe kit was complete and had breakdown on where to put parts. Also included a small l shaped ruller to insure the float is leveled properly. The service and shipping was amazing. THANKS
(1 of 1 people found this review helpful)
Was this review helpful?
carb kit
by Paul from Delray Beach, Florida on April 19, 2012
Worked great and now the engine Purrrrs!
Was this review helpful?
user
by Glenn from Memphis, Tennessee on April 09, 2012
Great product!!
Was this review helpful?
my order was as advertised and delivered on time
by Dale from Simms, Texas on March 19, 2012
I searched several sites, settled on iboats.com because of price and in stock. Got the kits on time and am very satisfied
(1 of 1 people found this review helpful)
Was this review helpful?
Tone's Small Engine Repair
by Tony from Scottsbluff, Nebraska on October 08, 2011
Good Products From I-boat..... Tone
Was this review helpful?
very good
by Carl from Elberton, Georgia on August 18, 2011
thamks
Was this review helpful?
Carburetor Kit
by Jeff from Winchester, Kentucky on June 13, 2011
Excellent customer service and fast delivery, thanks!
Was this review helpful?
Great
by Danny from Swartz Creek, Michigan on August 08, 2010
This is the lowest price on the same kit that I found anywhere and the delivery was cheap and very fast
Was this review helpful?
Review for Carburetor Kit with Float for Johnson/Evinrude 398729 396701 392061, GLM 40560
by a Customer on March 14, 2009
(5 of 6 people found this review helpful)
Was this review helpful?
Everything I Needed
by Adam from Bowling Green, Kentucky on June 02, 2014
It had all the pieces that my carb needed and a few extras.
Was this review helpful?
CARBURETOR KIT
by Charlene from Kissimmee, Florida on July 20, 2013
GREAT KIT. EASY TO REBUILD CARBURETOR. MOTOR RUNS BETTER THAN WHEN WAS BRAND NEW.
(1 of 2 people found this review helpful)
Was this review helpful?
carb kit
by Candy from Mansfield, Pennsylvania on July 17, 2013
very good materials and timely shipping and processing my order to get it to me
(1 of 1 people found this review helpful)
Was this review helpful?
carb kit
by Willie from Moweaqua, Illinois on June 03, 2013
haven't used it yet but looks like it should work just fine.
(0 of 1 people found this review helpful)
Was this review helpful?
sierra parts
by Jay from Victor, Montana on June 01, 2013
great fitting parts very complete kits
(1 of 1 people found this review helpful)
Was this review helpful?
Carb Kit for 77 Johnson 35 HP Seahorse
by Edward from Avoca, Pennsylvania on August 23, 2012
The kit was easy to install, there are however not enough plugs included to remove/replace all of the plugs on your carb body to allow you to do a thorough cleaning. Instructions are pretty basic and cover alot of carb models, so make sure you have a sevrice manual for your carb handy. If you don't, do not try to add some of the extra pieces to your carb. The instructions show parts you are to install but a few of the parts included do not work/do not apply on all carbs covered by this kit. Otherwise this is a great kit for a overhaul of your old/tired carb.
Was this review helpful?
parts
by Larry from Conroe, Texas on May 16, 2012
i orded my moter parts saturday i got them on monday very fast ///////// many thanks
Was this review helpful?
Complete kit
by Steve from Shorter, Alabama on May 08, 2012
Complete kit. Also came with the directions on how to set the FAST AND SLOW idle setting on the float. Most kits do not include both parts of this important information.
(4 of 4 people found this review helpful)
Was this review helpful?
owner
by Carol from Lincolnton, Georgia on December 27, 2011
Did a great job on the motor.
Was this review helpful?
Review for Carburetor Kit for Johnson/Evinrude 396701 392061 398729, GLM 40560 - Sierra
by a Customer on September 14, 2009
Very quick delivery
(0 of 1 people found this review helpful)
Was this review helpful?
Review for Carburetor Kit for Johnson/Evinrude 396701 392061 398729, GLM 40560 - Sierra
by a Customer on August 13, 2009
parts missing, customer service will not return e-mail
(1 of 4 people found this review helpful)
Was this review helpful?
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies