Johnson Premium Spark Plug Wire Kits

Save 18%-60% Off.
Limited Sale Price: $10.79
Save: $3.65
(25% Off $14.44)
Part # 18-8815-1 ValueShip™ Eligible
4" Spark Plug Wire

Replaces:
  • OMC #582365
Applies for Johnson/Evinrude engines only
Limited Sale Price: $10.43
Save: $4.51
(30% Off $14.94)
Part # 18-8816-1 ValueShip™ Eligible
6" Spark Plug Wire

Replaces:

  • OMC 582365
Applies for Johnson/Evinrude engines only
Limited Sale Price: $9.98
Save: $5.51
(35% Off $15.49)
Part # 18-5231-1 ValueShip™ Eligible
9" Spark Plug Wire

Replaces
  • OMC 582365
Applies to Johnson/Evinrude engines only
Premium Spark Plug Wire 12" for Johnson/Evinrude - Sierra
Limited Sale Price: $9.46
Save: $2.61
(21% Off $12.07)
Part # 18-8818-1 ValueShip™ Eligible
No Reviews  |  Write Review  |  Ask Question
12" Spark Plug Wire

Replaces:
  • OMC 582365
Applies to Johnson/Evinrude engines only
Your Price: $34.32
Save: $14.95
(30% Off $49.27)
Part # 18-5230-9-1 ValueShip™ Eligible
10" Wire (Pkg. of 5)

Universal
Limited Sale Price: $45.00
Save: $10.34
(18% Off $55.34)
Part # 18-5229-9-1 ValueShip™ Eligible
22" Wire (Pkg. of 5)

Universal
 
Limited Sale Price: $30.42
Save: $13.43
(30% Off $43.85)
Part # 18-8839-1 ValueShip™ Eligible
No Reviews  |  Write Review  |  Ask Question
Outboard Wire Set

For: Evinrude/Johnson 90 & 115 hp motors with boots on the spark plug end and the coil end.
Limited Sale Price: $39.00
Save: $16.94
(30% Off $55.94)
Part # 18-8840-1 ValueShip™ Eligible
150 & 175 hp Outboard Wire Set
Applies for Johnson/Evinrude engines only
6 spark plug wires in set, 2 -14", 4-16"
Mallory Plug Wire 9" 9-28005
Limited Sale Price: $10.99
Save: $17.09
(60% Off $28.08)
Part # 9-28005 ValueShip™ Eligible
Hurry! Only 1 left in stock
No Reviews  |  Write Review  |  Ask Question
Replaces Original Equipment Manufacturer(OEM):Mercury
Replaces Original Equipment Manufacturer # (OEM #):84-813715A1
Fits Application:outboard, female push in coil
Limited Sale Price: $35.29
Save: $8.71
(19% Off $44.00)
Part # 931-4922 ValueShip™ Eligible
4 Cylinder Inductive Spark Plug Wire Set
Fits 1994-2006 90 and 115 HP 4 cylinder 60 Degree Optical engines.
Set of 4 Inductive grey spark plug wires for Johnson/Evinrude 60o Optical (OIS 2000) ignition systems contains 2 each of the numbers listed below.
Replaces: 584919(5005805) 584920(5005806)
Sierra
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull StarVery high quality wires
by Joseph from Green Bay, Wisconsin on July 28, 2013
The silicone rubber construction of these wires should result in many years of dependable service.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star Based On 4 Reviews | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty StarDoes not work for Evinrude 140
by Joel from West Chester, Ohio on August 31, 2015
Do not buy these if you have an evinrude 140. The connectors pop-off the plugs and the coil assembly. One of the four I bought was broken also. I am trying to return them but so far this website has not been very helpful. Not impressed at all.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarJohnson plug wires
by Robert from Frostproof, Florida on February 09, 2015
Good quality wires at a good price and fast shipping. Love it!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starjigfish
by Sidney from Citrus Springs, Florida on September 14, 2012
well pleased with entire transaction, will use again.
(1 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarThe wires were too short...
by Luis from Miami, Florida on July 09, 2011
My fault, then I discover that the OEM wires are made of metal so I used the terminals of the Sierra wires wich are of good quality and used them in mt OEM wires, problem solved.
(2 of 7 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarHalf Star Based On 9 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Starperfect fit
by Joel from Woodbury, Georgia on September 26, 2015
worked as described.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarAwesome Wire
by Gary from Westerly, Rhode Island on September 12, 2014
These look like a quality product. Also physically they really dress the motor up. Nice silicone boots to get a good seal.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarWeekender
by Michael from Mukwonago, Wisconsin on July 29, 2014
Ordered the wires for a 1991 Johnson and recieved them very quickly. I'm very pleased with the speed of shipment and the wires are working great. The old wires were 7mm and the new ones are 8mm, so it's an added bonus.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty StarProduct arrived damaged
by Richard from Portland, Oregon on April 04, 2014
Product arrived damaged and will be returned. Very dissapointed.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarPerfect fit!
by Paul from Quitman, Georgia on February 28, 2014
Exactly what my poor old Johnson 40 needed. I finally got that little "miss" at idle that I've had since I bought it 2 years ago. Thanks iboats! RUSTY
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarJust what I ordered
by Jerome from Cedar Hill, Missouri on September 08, 2013
Spark Plug Wires received were exactly what I ordered. Received in only a couple days. Excellent shipping packaging of the product. Quality product fit and performed perfectly.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarGreat plug wire
by Michael from Opelousas, Louisiana on October 14, 2012
These plug wires are amazing. Very good ohms.
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarAs advertised
by Randy from Vernon, Alabama on August 31, 2012
Boat running much better now.
(2 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starperfect for johnson 130
by Doug from Greensboro, North Carolina on July 03, 2012
I purchased 4 of these and they fit perfectly and totally protect the wires, spark plug and ignition coil protected from moisture.
(3 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Starspark plug wires
by L from Goldendale, Washington on September 12, 2015
really liked the wires already put together, length was perfect
Was this review helpful?
Q:
Are these OK for a Johnson 100tlr79?
A:
According to Sierra all Johnson spark plug wires are the same you just need to know the length you require. So if 9 inch will work then yes these can work for you.
Q:
Hey folks, have a 1985 Johnson 150 GT model J150STLCOH, will these wires work as replacement?
A:
Yes this will work as a replacement, but you will need to verify if the 9" length is suitable for your motor.
Q:
Will these work on a 1986 Johnson 110 v4?
A:
It will work on your engine. You will just need to confirm if you need the 9" length as Sierra offers various lengths.
Q:
Hi, will this wire work on an evinrude XP200 1988 V6 G1742488?
A:
As long as 9 inches is the length you need then yes this will work for your engine.
Q:
Price for 2 wires or just one?
A:
This product includes one spark plug wire per quantity that you order.
Q:
Will this fit E10EL4SSE?
A:
Yes, this is the direct replacement for your Evinrude model.
Q:
Where are these plug wires measured from. I measured mine from boot to boot, they measure 5".?
A:
They are also measured from boot to boot.
Q:
Will the 9" version of this wire work on a 1999 evinrude ficht 200?
A:
Yes. Part #18-5231-1 will work for your engine.
Q:
Will this work on a 1982 evinrude 90 hp . how long are they?
A:
The length of these are 12 inches.
Q:
Will these wires work on a 1998 johnson 90 spl ? model number J90TSLECM?
A:
These are universal wires and so you will need to know length you require. These are a 10" spark plug wire, 7mm cooper core wire. If you have further questions contact us at the number at the top of the page.
Q:
Boot for other end included? 90 degree both ends?
A:
These do not have a boot on both ends.
Q:
Will these fit my 1974 850 2cyl mercury?
A:
Yes, this is a standard replacement for your Mercury engine.
Q:
Would these wires be compatable to work on my Kohler 7.5 R27 generator?
A:
Unfortunately, Sierra is unable to match up any spark plug wires to a generator. Feel free to contact us at the number on the top of the screen for more assistance.
Q:
Is there a set like this item for a 225hp engine?
A:
No unfortunately we don't have a set like this for a 225 HP. We will need to cross reference OEM number. You can call us for more assistance in finding the right part at 1-800-914-1123.
Q:
Does these fit a 1994 200 johnson Venom?
A:
Yes, this will work for a 200 HP Johnson model.
Q:
Is the price for 1 wire or set of 4?
A:
This is for one wire per quantity ordered.
Q:
Is wire copper, will they fit '98-70hp johnson?
A:
Yes, this is a standard after market replacement for this Johnson engine.
Q:
Will this fit a 1985 70 hp evinrude?
A:
You will need to know the length you require to know for sure. Call us at the number at the top of the page with any other questions you may have.
Q:
Will these work in a 1985 Johnson 140 v4 vro?
A:
Yes they will work as long as you need the 6" wire.
Q:
If lenght is correct will this work on early 90s johnson 225 v6?
A:
Yes exactly, you will just need the correct length.
Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies