Price: $222.11
Save: $45.08
(16% Off $267.19)
Part # 238833LSM1
2nd Day Air for $4.99 More Eligible
SHIPS TODAY!* if ordered in 4 hrs 33 mins.
13 to 16 Adjustable Height LakeSport 2-3/8 Hydraulic Power Pedestal with Mount - Swivl-Eze
Price: $167.45
Save: $56.54
(25% Off $223.99)
Part # 238813LSM1
2nd Day Air for $4.99 More Eligible
SHIPS TODAY!* if ordered in 3 hrs 33 mins.
Swivl-Eze

Find a durable and sturdy hardware for mounting your boat seats in the Swivl-Eze Lakesport 2-3/8 Series Seat Pedestal. Made from high-strength aluminum with anodized finish these pedestals are built tough and offer resistance to corrosion.

The easy to reach ergonomic positive locking handles enable comfortable height adjustments.  All the included hardware is engineered to meet or exceed to ABYC standards. The aluminum surfaces feature beat blasted finish that closes the open pores on it.

  • Positive-locking handles
  • Anodized aluminum base
  • Meets or exceeds ABYC standards

Features of Swivl-Eze Lakesport 2-3/8 Bell Pedestal with Seat mount

  • Bell pedestal with seat mount
  • Fixed height
  • Strong and durable aluminum construction
  • Anodized finish to resist the effects of corrosion
  • Easy to reach positive-locking handles
  • Offers good ergonomics
  • Aluminum surface is bead blasted to close the pores
  • Meets or exceeds ABYC standards for all speeds in passenger positions.

Features of Swivl-Eze Lakesport 2-3/8 Hydraulic Power Pedestal

  • Hydraulic power pedestal with seat mount
  • Adjustable height
  • Strong and durable aluminum construction
  • Anodized finish to resist the effects of corrosion
  • Easy to reach positive-locking handles
  • Offers good ergonomics
  • Aluminum surface s bead blasted to close the pores
  • Meets or exceeds ABYC standards for all speeds in driver position

Features of Swivl-Eze Lakesport 2-3/8 Bell Pedestal SE

  • Bell pedestal
  • Adjustable height
  • Strong and durable aluminum construction
  • Anodized finish to resist the effects of corrosion
  • Easy to reach positive-locking handles
  • Offers good ergonomics
  • Meets or exceeds ABYC standards
  • Aluminum surface s bead blasted to close the pores

Features of Swivl-Eze Lakesport 2-3/8 Hydraulic Pedestal with Seat mount

  • Hydraulic power pedestal with seat mount
  • Adjustable height
  • Strong and durable aluminum construction
  • Super satin anodized post
  • Easy to reach positive-locking handles
  • Offers good ergonomics
  • Meets or exceeds ABYC AO rating
  • Aluminum surface s bead blasted to close the pores

Features of Swivl-Eze Lakesport Super Satin Anodized Post

  • Strong and durable aluminum construction
  • Adjustable height
  • Super satin anodized finish
  • Easy-to-reach positive-locking handles
  • Meets or exceeds ABYC standards
  • Aluminum surface bead blasted to close the pores

Specification

Manf. Part # 238913LSM1

  • Fixed height: 13"
  • Diameter: 2-3/8"

Manf. Part # 238813LSM1

  • Adjustable Height: 13" to 16"

Manf. Part # 2385400

  • Diameter: 2-3/8"
  • Adjustable Height: 14" to 20"

Manf. Part # 238833LSM1

  • Diameter: 2-3/8"
  • Adjustable Height: 25" – 32"

Manf. Part # 2385405

  • Adjustable Height: 12.5" – 15.5"
  • Diameter: 2-3/8"
Average Customer Review for Power Ped 2 3/8in 25in-32in - Swivl-Eze
Full StarFull StarFull StarFull StarFull Star
Based On 4 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
S y
by Eric from Fife Lake, Michigan on May 21, 2014
Rugged and very s y . Timely delivery
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Boat seat pedistal
by Vincent from Saint John, New Brunswick on December 29, 2013
Hi, I am very satisfied with this product. It is exactly what I was looking for. I tried it in my boat and it fits perfectly. I love to fish and I am looking forward to getting on the water next spring.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
The Best
by Adam from Thunder Bay, Ontario on May 09, 2013
This is the one you want for newer Lund boats. I threw away my Cabelas post I got for a little cheaper after using it once. Best price I could find online was here. This does run a bit tall. I'm 6'1 and find it comfortable even on its lowest setting. If you are say 5'8" or less you might find this post a touch too tall depending on the seat you couple this with.
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Swivel eze
by Nathaniel from Gardiner, New York on May 07, 2013
Wellbuilt
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great product
by Robert from Staunton, Virginia on September 21, 2016
Works like a charm. Have 3 others that came with my boat when I purchased it new. A little pricey but you get what you pay for.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
power pedestal
by Richard from Fort Wayne, Indiana on September 06, 2016
the pedestal is 100% what I needed and the shipping was very resonable priced. the employees were more than helpful thanks again. If I need additional parts I'll go to your web page first
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
2007 Lund 1800 Pro-V tiller.
by Conrad from Ely, Minnesota on July 14, 2014
A word of caution. If the seat has a slight depression where the pedestal mounts, the hydraulic handle will not engage the piston.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
lake sport
by Laney from Cannon Falls, Minnesota on August 02, 2012
no complaints
(1 of 5 people found this review helpful)
Was this review helpful?
Q:
Will this fit in the rear seat plates for my 2007 Lund 1800 Alaskan?
A:
Most pedestals can mount to most seats. Industry standard hole pattern is 5-1/4" for this seat mount. Most seats accept that, so that is what you will want to verify.


Q:
Will this post fit into a plug in base like 3300750-1?
A:
This pedestal and the Springfield base are made by different manufacturers and generally are not compatible in design, so we cannot guarantee that these products will work well together.


Q:
What is the outside diameter of the post at the top part?
A:
The OD at the top is 2-7/8".


Q:
Will this base snap into an Attwood 238 base?
A:
Yes, since Attwood and Swivl-Eze are the same, there should be no compatibility issue, and it is the right size.


Q:
Can i order just the seat base without the pedistal?
A:
The seat mount is part number 818441-3.


Q:
Does the seat mount move fore and aft ? how much below the floor does the base plate extend ? does the post lock in place ? does the seat lock in place ? is a footrest available ? what seats are compatible with the mount ?
A:
It does not move fore and aft. Base plate goes flush with the deck so it does not extend. The post does lock into the base. No footrest is available. The seat mount is the industry standard 5-1/4" bolt pattern which most of our seats accept.


Q:
What butt seat do you recommend with this pedestal?
A:
All of our butt seats will accept a standard seat mount (bolt pattern of 5-1/4") which this pedestal is. You can browse the type you want: http://www.iboats.com/Butt-Casting-Boat-Seats/dm/view_id.473678


Q:
Will this fit a 2011 Tracker Pro Team 175 TF bass boat?
A:
For bass boats, we recommend removable pedestals, like a king pin design. Refer to this link to see what would work best for bass boats: http://www.iboats.com/King-Pin-Type-11-Seat-Pedestal-Kit-Wise-Boat-Seats/dm/view_id.375774


Q:
How fast can this seat be used?


Q:
Will this pedestal slip into the deck recess hole of a 2004 Crestliner 1850 SportFish ??
A:
This is an after market part and is not specific to any boat. The way to match it up is by style and dimensions.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies