Lee'S Tackle Inc. - Rod Holders

	Lee's 30° Stainless Steel Flush Mount Rod Holder - 2" O.D. Part # RH525SS Flush Mount Rod Holder RH-525SS Medium 30° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. All rod holders are drilled and countersunk for 1/4" bolts. It is highly recommended that these units be "through-bolted", and not attached with screws, whenever possible
	Lee's 90 degree Stainless Steel Flush Mount Rod Holder - 2" O.D. Part # RH527VS Flush Mount Rod Holder RH-527VS Medium 90° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. All rod holders are drilled and countersunk for 1/4" bolts. It is highly recommended that these units be "through-bolted", and not attached with screws, whenever possible
	Lee's 15° Stainless Steel Flush Mount Rod Holder - 2" O.D. Part # RH529HS Flush Mount Rod Holder RH-529HS Medium 15° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. All rod holders are drilled and countersunk for 1/4" bolts. It is highly recommended that these units be "through-bolted", and not attached with screws, whenever possible
	Lee's 30° Chrome Flush Mount Rod Holder - 2.25" O.D. Part # RH530SS Flush Mount Rod Holder RH-530 Large 30° Chrome on Brass The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. All Rod Holders are drilled and countersunk for 1/4" bolts. It is highly recommended these units be "through-bolted", whenever possible.
	Lee's 90 degree Stainless Steel Flush Mount Rod Holder - 2.25" O.D. Part # RH532VS Flush Mount Rod Holder RH-532VS Large 90° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. All Rod Holders are drilled and countersunk for 1/4" bolts. It is highly recommended that these units but "through-bolted", and not attached with screws, whenever possible.
	Lee's 15° Stainless Steel Flush Mount Rod Holder - 2.25" O.D. Part # RH534HS Flush Mount Rod Holder RH-534HS Large 15° Stainless Steel The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. All Rod Holders are drilled and countersunk for 1/4" bolts. It is highly recommended that these units be "through-bolted", and not attached with screws, whenever possible.
	Lee's 30° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D. Part # RH525SS/XS Flush Mount Rod Holder Heavy Duty Bar Pin All Stainless Steel RH-525SS/XS Medium 30° The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
	Lee's 0° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D. Part # RH527VS/XS Flush Mount Rod Holder Heavy Duty Bar Pin All Stainless Steel RH-527VS/XS Medium 0° The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
	Lee's 15° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D. Part # RH529HS/XS Flush Mount Rod Holder Heavy Duty Bar Pin All Stainless Steel RH-529HS/XS Medium 15° The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
	Lee's 30° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D. Part # RH530SS/XS Flush Mount Rod Holder Heavy Duty Bar Pin All Stainless Steel RH-530SS/XS Large 30° The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
	Lee's 0° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D. Part # RH532VS/XS Flush Mount Rod Holder Heavy Duty Bar Pin All Stainless Steel RH-532VS/XS Large 0° The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
	Lee's 15° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D. Part # RH534HS/XS Flush Mount Rod Holder Heavy Duty Bar Pin All Stainless Steel RH-534HS/XS Large 15° The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.
	Lee's Stainless Steel Heavy Duty Bulkhead Mount w/ Swivel Base Part # RH570 Swivel Base Rod Holders RH570 Stainless Steel Side Mount w/ Swivel Base Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a inch stainless steel lock nut at the bottom of the rod holder.
	Lee's Stainless Steel Heavy Duty Bulkhead Mount w/ Swivel Base - Extra Long Part # RH570XL Swivel Base Rod Holders RH570XL Stainless Steel Side Mount w/ Swivel Base Extra Long This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder Part # RH575 Swivel Base Rod Holders RH575 Standard Angle 30° Stainless Steel Flush Mount w/ Swivel Base Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder Part # RH575XL Swivel Base Rod Holders RH575XL Standard Angle 30° Stainless Steel Flush Mount w/ Swivel Base Extra Long This holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder Part # RH577V Swivel Base Rod Holder RH577V Vertical 0° Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder - Extra Long Tube Part # RH577XL Swivel Base Rod Holder RH577XL Vertical 0° Extra Long Tube Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder Part # RH579H Swivel Base Rod Holders RH579 Half Angle 15° Stainless Steel Flush Mount w/ Swivel Base Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee's 15° Stainless Steel Swivel Base Flush Mount Rod HOlder - Extra Long Tube Part # RH579XL Swivel Base Rod Holders RH579XL Half Angle 15° Extra Long Tube Stainless Steel Flush Mount w/ Swivel Base Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length Part # RH5165 RH5165 Standard Angle 30° Short Tube Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length Part # RH5167V RH5167V Vertical 0° Short Tube Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length Part # RH5169H Swivel Base Rod Holders RH5169 Half Angle 15° Short Tube Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
	Lee'S Pvc Drain Cap F/ Mediumrod Holders 1/4" Npt For Barb Part # RH5999-0001
	Lee'S Pvc Drain Cap F/ Heavyrod Holders 1/4" Npt For Barb Part # RH5999-0003
	Lee's Stainless Steel Backing Plate For 30° Heavy Rod Holders Part # RH5930 RH5930 Stainless Steel Backing Plate for 30° Heavy Rod Holders
	Lee's Stainless Steel Backing Plate For 30° Medium Rod Holders Part # RH5931 RH5931 Stainless Steel Backing Plate for 30° Medium Rod Holders
	Lee's Vinyl Rubber Insert For RH510 & RH527V Part # RH511 RH511 Vinyl Rubber Insert for RH510 & RH527V
	Lee's Vinyl Rubber Inserts For RH512, RH550, RH552CB & RH552XL Part # RH513 RH513 Vinyl Rubber Insert for RH512, RH550, RH552CB & RH552XL
	Lee's Vinyl Rubber Insert for RH515, RH532 & Ch110 Part # RH516 RH516 Vinyl Rubber Insert for RH515, RH532 & CH110
	Lee's Vinyl Rubber Insert For RH525 Part # RH526 RH526 Vinyl Rubber Insert for RH525
	Lee's Vinyl Rubber Insert For RH529H Part # RH528 RH528 Vinyl Rubber Insert for RH529H
	Lee's Vinyl Rubber Insert for RH530 Part # RH531 RH531 Vinyl Rubber Insert for RH530
	Lee's Vinyl Rubber Insert For RH534H Part # RH535 RH535 Vinyl Rubber Insert for RH534H
	Lee's Rod and Reel Hanger Set - Penn International 12T/LT - Bright Gold Part # MC0075-1012 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 12T/LT Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 16S - Bright Gold Part # MC0075-1016 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 16S Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 20 - Bright Gold Part # MC0075-1020 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 20 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 20T - Bright Gold Part # MC0075-1022 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 20T Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 30 - Bright Gold Part # MC0075-1030 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 30 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 30T, 30S - Bright Gold Part # MC0075-1032 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 30T, 30S Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 30VSW, 30TW, 30SW Part # MC0075-1033 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 30VSW, 30TW, 30SW Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 50 - Bright Gold Part # MC0075-1050 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 50 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 50W - Bright Gold Part # MC0075-1051 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 50W Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 50T, 50S - Bright Gold Part # MC0075-1052 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 50T, 50S Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 50VSW, 50TW, 50SW - Bright Gold Part # MC0075-1053 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 50VSW, 50TW, 50SW Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 70VS - Bright Gold Part # MC0075-1071 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 70VS Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 80 - Bright Gold Part # MC0075-1080 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 80 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 80W - Bright Gold Part # MC0075-1081 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 80W Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 80T, 80ST, 80TS - Bright Gold Part # MC0075-1082 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 80T,80ST, 80TS Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 80TW, 80SW, 80STW - Bright Gold Part # MC0075-1083 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 80TW,80SW, 80STW Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 130, 130H, 130S - Bright Gold Part # MC0075-1130 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 130, 130H, 130S Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Penn International 130ST - Bright Gold Part # MC0075-1131 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Penn International 130ST Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano Tiagra 16 - Bright Gold Part # MC0075-3016 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano Tiagra 16 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano Tiagra 20 - Bright Gold Part # MC0075-3020 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano Tiagra 20 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano Tiagra 30 - Bright Gold Part # MC0075-3030 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano Tiagra 30 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano Tiagra 30W - Bright Gold Part # MC0075-3031 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano Tiagra 30W Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano Tiagra 50 - Bright Gold Part # MC0075-3050 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano Tiagra 50 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano Tiagra 50W - Bright Gold Part # MC0075-3051 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano Tiagra 50W Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano Tiagra 80W - Bright Gold Part # MC0075-3081 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano Tiagra 80W Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano TLD20 - Bright Gold Part # MC0075-4020 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano TDL20 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano TLD25, TLD30 - Bright Gold Part # MC0075-4025 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano TDL25, TLD30 Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Rod and Reel Hanger Set - Shimano TLD50 LRS - Bright Gold Part # MC0075-4026 Rod Storage Systems Rod and Reel Hanger Set Anodized Finish: Gold For: Shimano TLD50 LRS (2 Speed) Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Single Rod Rack Set - Satin Silver Finish Part # MC70 Rod Storage Systems Single Rod Rack Sets Finish: Satin Silver Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Single Rod Rack Set - Bright Gold Finish Part # MC70GL Rod Storage Systems Single Rod Rack Sets Anodized Finish: Bright Gold Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Single Rod Rack Set - Bright Silver Finish Part # MC70SL Rod Storage Systems Single Rod Rack Sets Anodized Finish: Bright Gold Simple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead.
	Lee's Clamp-On Light Bracket - 1.050" Pipe Part # LT52001 Clamp-On Accessory Fits: 1.050" Pipe Mounts: Horizontal/Vertical Finish: Silver Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
	Lee's Clamp-On Light Bracket - 1.315" Pipe Part # LT52002 Clamp-On Accessory Fits: 1.050" Pipe Mounts: Horizontal/Vertical Finish: Silver Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
	Lee's Clamp-On Light Bracket - 1.660" Pipe Part # LT52003 Clamp-On Accessory Fits: 1.660" Pipe Mounts: Horizontal/Vertical Finish: Silver Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
	Lee's Clamp-On Light Bracket - 1.900" Pipe Part # LT52004 Clamp-On Accessory Fits: 1.900" Pipe Mounts: Horizontal/Vertical Finish: Silver Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item. Light Brackets can be mounted on Horizontal or Vertical pipe. They come with five pre-threaded holes for mounting most standard Halogen lights. Two attachment bolts are included with each unit.
	Lee's Clamp-On Antenna Mount - 1.050" Pipe Part # AT51001 Clamp-On Accessory Fits: 1.050" Pipe Mounts: Horizontal Finish: Silver Heavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.
	Lee's Clamp-On Antenna Mount - 1.315" Pipe Part # AT51002 Clamp-On Accessory Fits: 1.315" Pipe Mounts: Horizontal Finish: Silver Heavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.
	Lee's Clamp-On Antenna Mount - 1.660" Pipe Part # AT51003 Clamp-On Accessory Fits: 1.660" Pipe Mounts: Horizontal Finish: Silver Heavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.
	Lee's Clamp-On Antenna Mount - 1.900" Pipe Part # AT51004 Clamp-On Accessory Fits: 1.900" Pipe Mounts: Horizontal Finish: Silver Heavy duty Clamp-On brackets come ready to mount fixed antennas. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with only an Allen Wrench, they are the perfect retro-fit item.
	Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe Part # RA5001SL Aluminum Clamp-on Rod Holders Model: RA5001SL Color: Sliver Fits: 1.050" O.D. Pipe Mount: Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe Part # RA5001GL Aluminum Clamp-on Rod Holders Model: RA5001GL Color: Gold Fits: 1.050" O.D. Pipe Mount: Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.315" O.D. Pipe Part # RA5002SL Aluminum Clamp-on Rod Holders Model: RA5002SL Color: Silver Fits: 1.315" O.D. Pipe Mount: Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.315" O.D. Pipe Part # RA5002GL Aluminum Clamp-on Rod Holders Model: RA5002GL Color: Gold Fits: 1.315" O.D. Pipe Mount: Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.660" O.D. Pipe Part # RA5003SL Aluminum Clamp-on Rod Holders Model: RA5003SL Color: Silver Fits: 1.660" O.D. Pipe Mount: Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.660" O.D. Pipe Part # RA5003GL Aluminum Clamp-on Rod Holders Model: RA5003GL Color: Gold Fits: 1.660" O.D. Pipe Mount: Vertial JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.900" O.D. Pipe Part # RA5004SL Aluminum Clamp-on Rod Holders Model: RA5004SL Color: Silver Fits: 1.900" O.D. Pipe Mount: Vertial JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.900" O.D. Pipe Part # RA5004GL Aluminum Clamp-on Rod Holders Model: RA5004GL Color: Gold Fits: 1.900" O.D. Pipe Mount: Vertial JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 2.375" O.D. Pipe Part # RA5005SL Aluminum Clamp-on Rod Holders Model: RA5005SL Color: Silver Fits: 2.375" O.D. Pipe Mount: Vertial JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 2.375" O.D. Pipe Part # RA5005GL Aluminum Clamp-on Rod Holders Model: RA5005GL Color: Gold Fits: 2.375" O.D. Pipe Mount: Vertial JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe Part # RA5201SL Aluminum Clamp-on Rod Holders Model: RA5201SL Color: Silver Fits: 1.050" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe Part # RA5201GL Aluminum Clamp-on Rod Holders Model: RA5201GL Color: Gold Fits: 1.050" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe Part # RA5202SL Aluminum Clamp-on Rod Holders Model: RA5202SL Color: Silver Fits: 1.315" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe Part # RA5202GL Aluminum Clamp-on Rod Holders Model: RA5202GL Color: Gold Fits: 1.315" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe Part # RA5203SL Aluminum Clamp-on Rod Holders Model: RA5203SL Color: Silver Fits: 1.660" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe Part # RA5203GL Aluminum Clamp-on Rod Holders Model: RA5203GL Color: Gold Fits: 1.660" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe Part # RA5204SL Aluminum Clamp-on Rod Holders Model: RA5204SL Color: Silver Fits: 1.900" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe Part # RA5204GL Aluminum Clamp-on Rod Holders Model: RA5204GL Color: Gold Fits: 1.900" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 2.375" O.D. Pipe Part # RA5205SL Aluminum Clamp-on Rod Holders Model: RA5205SL Color: Silver Fits: 2.375" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
	Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 2.375" O.D. Pipe Part # RA5205GL Aluminum Clamp-on Rod Holders Model: RA5205GL Color: Gold Fits: 2.375" O.D. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

No Review for Lee's 30° Stainless Steel Flush Mount Rod Holder - 2" O.D.

Be the first to Write a Review

No Review for Lee's 90 degree Stainless Steel Flush Mount Rod Holder - 2" O.D.

Be the first to Write a Review

No Review for Lee's 15° Stainless Steel Flush Mount Rod Holder - 2" O.D.

Be the first to Write a Review

No Review for Lee's 30° Chrome Flush Mount Rod Holder - 2.25" O.D.

Be the first to Write a Review

No Review for Lee's 90 degree Stainless Steel Flush Mount Rod Holder - 2.25" O.D.

Be the first to Write a Review

No Review for Lee's 15° Stainless Steel Flush Mount Rod Holder - 2.25" O.D.

Be the first to Write a Review

No Review for Lee's 30° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D.

Be the first to Write a Review

No Review for Lee's 0° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D.

Be the first to Write a Review

No Review for Lee's 15° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D.

Be the first to Write a Review

No Review for Lee's 30° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D.

Be the first to Write a Review

No Review for Lee's 0° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D.

Be the first to Write a Review

No Review for Lee's 15° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D.

Be the first to Write a Review

No Review for Lee's Stainless Steel Heavy Duty Bulkhead Mount w/ Swivel Base

Be the first to Write a Review

No Review for Lee's Stainless Steel Heavy Duty Bulkhead Mount w/ Swivel Base - Extra Long

Be the first to Write a Review

No Review for Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder

Be the first to Write a Review

No Review for Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder

Be the first to Write a Review

No Review for Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder

Be the first to Write a Review

No Review for Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder - Extra Long Tube

Be the first to Write a Review

No Review for Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder

Be the first to Write a Review

No Review for Lee's 15° Stainless Steel Swivel Base Flush Mount Rod HOlder - Extra Long Tube

Be the first to Write a Review

No Review for Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length

Be the first to Write a Review

No Review for Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length

Be the first to Write a Review

No Review for Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length

Be the first to Write a Review

No Review for Lee'S Pvc Drain Cap F/ Mediumrod Holders 1/4" Npt For Barb

Be the first to Write a Review

No Review for Lee'S Pvc Drain Cap F/ Heavyrod Holders 1/4" Npt For Barb

Be the first to Write a Review

No Review for Lee's Stainless Steel Backing Plate For 30° Heavy Rod Holders

Be the first to Write a Review

No Review for Lee's Stainless Steel Backing Plate For 30° Medium Rod Holders

Be the first to Write a Review

No Review for Lee's Vinyl Rubber Insert For RH510 & RH527V

Be the first to Write a Review

No Review for Lee's Vinyl Rubber Inserts For RH512, RH550, RH552CB & RH552XL

Be the first to Write a Review

No Review for Lee's Vinyl Rubber Insert for RH515, RH532 & Ch110

Be the first to Write a Review

No Review for Lee's Vinyl Rubber Insert For RH525

Be the first to Write a Review

No Review for Lee's Vinyl Rubber Insert For RH529H

Be the first to Write a Review

No Review for Lee's Vinyl Rubber Insert for RH530

Be the first to Write a Review

No Review for Lee's Vinyl Rubber Insert For RH534H

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 12T/LT - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 16S - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 20 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 20T - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 30 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 30T, 30S - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 30VSW, 30TW, 30SW

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 50 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 50W - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 50T, 50S - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 50VSW, 50TW, 50SW - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 70VS - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 80 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 80W - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 80T, 80ST, 80TS - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 80TW, 80SW, 80STW - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 130, 130H, 130S - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Penn International 130ST - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano Tiagra 16 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano Tiagra 20 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano Tiagra 30 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano Tiagra 30W - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano Tiagra 50 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano Tiagra 50W - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano Tiagra 80W - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano TLD20 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano TLD25, TLD30 - Bright Gold

Be the first to Write a Review

No Review for Lee's Rod and Reel Hanger Set - Shimano TLD50 LRS - Bright Gold

Be the first to Write a Review

No Review for Lee's Single Rod Rack Set - Satin Silver Finish

Be the first to Write a Review

No Review for Lee's Single Rod Rack Set - Bright Gold Finish

Be the first to Write a Review

No Review for Lee's Single Rod Rack Set - Bright Silver Finish

Be the first to Write a Review

No Review for Lee's Clamp-On Light Bracket - 1.050" Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Light Bracket - 1.315" Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Light Bracket - 1.660" Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Light Bracket - 1.900" Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Antenna Mount - 1.050" Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Antenna Mount - 1.315" Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Antenna Mount - 1.660" Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Antenna Mount - 1.900" Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.315" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.315" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.660" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.660" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.900" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.900" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 2.375" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 2.375" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.660" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 1.900" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Silver Aluminum - Horizontal Mount - Fits 2.375" O.D. Pipe

Be the first to Write a Review

No Review for Lee's Clamp-On Rod Holder - Gold Aluminum - Horizontal Mount - Fits 2.375" O.D. Pipe

Be the first to Write a Review

This product typically leaves our warehouse in 1 business day.

To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.

General Policy

We work hard to provide you with the best value in product prices and shipping charges, and to get your order to you in a timely, safe, and convenient manner. Internet sales involve the cost of getting the product to you, and shipping carriers base that cost on the size and weight of the package, plus the distance the package travels from our warehouse to your door. We keep our product prices low, negotiate low shipping charges from our carriers and pass those savings on to you, and we don't charge sales tax (except for residents of Utah), so your order from iboats.com is the best value for all your boating needs.

Our standard shipping method is UPS ground, which typically takes 2-5 additional transit days after the order has left our warehouse, depending on your delivery address. We also offer other shipping options, including expedited delivery, and the actual delivery date will depend on the shipping options you choose.

Shipping to Canada

Most products sold by iboats.com can be purchased and shipped to Canada. Some restrictions apply to certain items, such as hazardous materials, over-weight products, and the method of shipping. Available product lines, shipping rates and fees may vary depending on the delivery address for your order.

Currently, iboats.com offers ground shipping to all Canada provinces. Our Canadian brokerage service accelerates your orders through the Customs clearance process and facilitates the delivery of your order through Canada Post or the best method based on your shipping address. We do not currently offer expedited shipping methods to Canada.

At iboats.com we want to simplify your transaction and give you a pleasing purchasing experience so you'll come shop with us again and again. We therefore calculate all the duties, taxes, and other fees specific to Canadian orders and show you the total landed cost of getting the order to your door. There are no hidden fees and will be no surprise COD charges when the package is delivered to you.

Order History & Tracking

We provide several methods to track your order and keep you informed of your order status and expected delivery date. After completing an iboats.com purchase transaction, an account will automatically be created for your provided email address. You'll receive an email from iboats.com Customer Service informing you of your new User Account and the many benefits it provides. If you don't wish to have an iboats.com Account with password, do nothing and your account won't be registered; however, you can respond to the instructions in the email and easily register your account and setup a password. This will allow you to sign in to your account by choosing the Order Status link from any iboats.com page, where you can browse your order history and track the status of all your orders - tracking numbers are displayed that link to the delivery carrier's tracking webpage.

If you have provided your email address during checkout, we will also email you your invoice, which includes a link for tracking your order and viewing the current status of your order. Refer to your invoice email and tracking link any time you wish to track the status of your order

Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

Electronics/Software/Videos: Electronics/Software/Videos are not returnable. Please be careful when ordering to choose the correct product.

See our complete return policy.

iboats.com Low Price Guarantee – Quick and Simple

We have the best selection of products at the best prices, guaranteed.

Nobody beats our prices. If you find a current lower price on an identical, in-stock item from any nationally recognized marine Internet retailer, we will match the price. iboats.com works hard to bring you everyday low prices plus knowledgeable product advice, great in-stock selection, and outstanding customer service. Our guarantee covers it all, and if you’ve found a better price let us know and we’ll match it and work hard to make you a satisfied iboats customer for life.

Quick: Call 1-800-914-1123

Simple: Have the lower competitive price info ready, as outlined below.

Buy with Confidence – We Won’t Be Beat!

Here’s what you need to supply us to verify a lower price:

The retailer’s name and URL website address of where you found the lower price.
The product name, manufacturer, model number, price, and shipping charges.
Electronics products, trolling motors, and outboard engines are not available for price matching.

30-day Guarantee
Buy now with confidence, knowing that should there ever be a lower price from any nationally recognized U.S. marine Internet retailer for 30 days after your purchase, iboats will match that price and refund you the difference. Or we’ll match the price before your purchase. The price considered will be the advertised price plus shipping and handling charges.

Qualifying items must be verifiable on the Internet or through a current printed advertisement. Items must be identical, in-stock new products and not sold through a membership club or auction site or any of the following offers, such as free offers, multiple discounts like “buy one, get one at half off”, special orders, special bundles, clearance sales, mail-in rebate offers, typographical errors, private sales, non-retail websites, promo discounts, or limited-time offers. All price matching is at the discretion of iboats.com and is subject to change at any time. iboats reserves the right to limit quantities. Price-match products are not eligible for special offers or discounts.

iboats.com – The Leader in Price Buster Confidence!

Copyright © 1999- iboats, inc. All rights reserved iboats Home \| Boat Parts & Accessories \| Boat Covers \| Boat Propellers \| Boat Motors \| Boats for Sale \| New Boats \| Boat Forums Contact iboats \| Site Terms of Use \| Online Privacy Practices \| Legal Notices

Lee'S Tackle Inc. - Rod Holders

Need Help? Have Questions?

Lee's 30° Stainless Steel Flush Mount Rod Holder - 2" O.D.

Lee's 90 degree Stainless Steel Flush Mount Rod Holder - 2" O.D.

Lee's 15° Stainless Steel Flush Mount Rod Holder - 2" O.D.

Lee's 30° Chrome Flush Mount Rod Holder - 2.25" O.D.

Lee's 90 degree Stainless Steel Flush Mount Rod Holder - 2.25" O.D.

Lee's 15° Stainless Steel Flush Mount Rod Holder - 2.25" O.D.

Lee's 30° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D.

Lee's 0° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D.

Lee's 15° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2" O.D.

Lee's 30° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D.

Lee's 0° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D.

Lee's 15° Stainless Steel Heavy Duty Bar Pin Rod Holder - 2.25" O.D.

Lee's Stainless Steel Heavy Duty Bulkhead Mount w/ Swivel Base

Lee's Stainless Steel Heavy Duty Bulkhead Mount w/ Swivel Base - Extra Long

Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder

Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder

Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder

Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder - Extra Long Tube

Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder

Lee's 15° Stainless Steel Swivel Base Flush Mount Rod HOlder - Extra Long Tube

Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length

Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length

Lee's 15° Stainless Steel Swivel Base Flush Mount Rod Holder - Medium Length

Lee'S Pvc Drain Cap F/ Mediumrod Holders 1/4" Npt For Barb

Lee'S Pvc Drain Cap F/ Heavyrod Holders 1/4" Npt For Barb

Lee's Stainless Steel Backing Plate For 30° Heavy Rod Holders

Lee's Stainless Steel Backing Plate For 30° Medium Rod Holders

Lee's Vinyl Rubber Insert For RH510 & RH527V

Lee's Vinyl Rubber Inserts For RH512, RH550, RH552CB & RH552XL

Lee's Vinyl Rubber Insert for RH515, RH532 & Ch110

Lee's Vinyl Rubber Insert For RH525

Lee's Vinyl Rubber Insert For RH529H

Lee's Vinyl Rubber Insert for RH530

Lee's Vinyl Rubber Insert For RH534H

Lee's Rod and Reel Hanger Set - Penn International 12T/LT - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 16S - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 20 - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 20T - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 30 - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 30T, 30S - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 30VSW, 30TW, 30SW

Lee's Rod and Reel Hanger Set - Penn International 50 - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 50W - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 50T, 50S - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 50VSW, 50TW, 50SW - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 70VS - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 80 - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 80W - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 80T, 80ST, 80TS - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 80TW, 80SW, 80STW - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 130, 130H, 130S - Bright Gold

Lee's Rod and Reel Hanger Set - Penn International 130ST - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano Tiagra 16 - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano Tiagra 20 - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano Tiagra 30 - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano Tiagra 30W - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano Tiagra 50 - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano Tiagra 50W - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano Tiagra 80W - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano TLD20 - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano TLD25, TLD30 - Bright Gold

Lee's Rod and Reel Hanger Set - Shimano TLD50 LRS - Bright Gold

Lee's Single Rod Rack Set - Satin Silver Finish

Lee's Single Rod Rack Set - Bright Gold Finish

Lee's Single Rod Rack Set - Bright Silver Finish

Lee's Clamp-On Light Bracket - 1.050" Pipe

Lee's Clamp-On Light Bracket - 1.315" Pipe

Lee's Clamp-On Light Bracket - 1.660" Pipe

Lee's Clamp-On Light Bracket - 1.900" Pipe

Lee's Clamp-On Antenna Mount - 1.050" Pipe

Lee's Clamp-On Antenna Mount - 1.315" Pipe

Lee's Clamp-On Antenna Mount - 1.660" Pipe

Lee's Clamp-On Antenna Mount - 1.900" Pipe

Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe

Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.050" O.D. Pipe

Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.315" O.D. Pipe

Lee's Clamp-On Rod Holder - Gold Aluminum - Vertical Mount - Fits 1.315" O.D. Pipe

Lee's Clamp-On Rod Holder - Silver Aluminum - Vertical Mount - Fits 1.660" O.D. Pipe