 |
9" x 9" Standard Mount Trim Tab Kit - Lenco
Part # 15000-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9 x 9 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
9" x 12" Standard Mount Trim Tab Kit - Lenco
Part # 15001-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9 x 12 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
9" X 18" Trim Tab Kit without switch - Lenco
Part # 15002-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
9" X 24" Trim Tab Kit without switch - Lenco
Part # 15003-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
9" X 30" Trim Tab Kit without switch - Lenco
Part # 15004-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
9" X 36" Trim Tab Kit without switch - Lenco
Part # 15005-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
9" X 40" Trim Tab Kit without switch - Lenco
Part # 15006-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
12" X 12" Trim Tab Kit without switch - Lenco
Part # 15007-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
12" X 18" Trim Tab Kit without switch - Lenco
Part # 15008-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
12" X 24" Trim Tab Kit without switch - Lenco
Part # 15009-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
12" X 30" Trim Tab Kit without switch - Lenco
Part # 15010-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
12" X 36" Trim Tab Kit without switch - Lenco
Part # 15011-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
12" X 40" Trim Tab Kit without switch - Lenco
Part # 15012-101
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware SWITCH SOLD SEPARATELY. See switch selections for available options
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
9" X 12" Standard Trim Tab Kit with Double Rocker Switch - Lenco
Part # 15101-104
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
9" X 12" Standard Trim Tab Kit with Standard Tactile Switch - Lenco
Part # 15104-102
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
9" X 12" Standard Trim Tab Kit with LED Indicator Switch - Lenco
representative photo
Part # 15108-103
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
12" X 12" Standard Trim Tab Kit with Double Rocker Switch - Lenco
Part # 15103-104
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
12" X 12" Standard Trim Tab Kit with Standard Tactile Switch - Lenco
Part # 15105-102
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
 |
12" X 12" Standard Trim Tab Kit with LED Indicator Switch - Lenco
Part # 15109-103
Fast response electric actuators for precise control.
Fully submersible with plug and play deutsch connections.
Each kit contains 2 actuators w/ 6' lead
2 12 Gauge 304 Stainless Steel planes 9” x 9” 2 20' Actuator Extension Wiring Harnesses
2 each of Upper Mounting Bracket w/ Gland Seal 2 each of Lower mounting Bracket All Necessary Stainless Steel and Brass Mounting Hardware
The trim tabs operate independently of one another to provide optimal performance by redirecting water flow at the transom of the boat.
Designed to improve the overall performance of a boat. If used properly, Lenco trim tabs will also improve the fuel efficiency of your boat. Lenco actuators are electromechanical, they provide an immediate response at the touch of a button. Height needed for actuator: 14" for standard.
Heavier boats or boats 25' and up that run at more moderate speeds should be fitted with 12" tabs with increased width. Faster boats (50mph+) may be better suited to longer racing tabs.
|
