Swivl-Eze
Lock'n Stow for Mercury® 75-200 EFI - Swivl-Eze
Price: $87.33
Save: $17.66
(16% Off $104.99)
Part # 10108
2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 23 hrs 37 mins.
This item is found in the following Product Families
  • Unlike traditional transom savers, Lock'N Stow DOES NOT "tie" the boat's outboard to the trailer.
  • In some cases it can cause "trailer shock" when the boat and trailer get out-of-sync.
  • This is a small compact unit that totally locks the outboard in the forward position without tying it to the trailer.
  • And its small size makes it easy to store in your boat when not in use.
  • Full StarFull StarFull StarFull StarFull Star
    Based On 4 Reviews | Write Review
    Full StarFull StarFull StarFull StarFull Star
    Very convient
    by Lennis from Kaplan, Louisiana on June 23, 2014
    Very nice product. Works great and easy to store in you boat
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Nice product
    by James from Hooksett, New Hampshire on May 13, 2013
    Nice design, works great. It was not clear if this could be used with my 2003 Merc 90hp 4 stroke. Customer service stated it would fit. I had to use a Dremel to open up the plastic shroud on the lower end so that the bolts could fully seat in the bracket cups. If you plan on using this with a motor that has a plastic shroud plan on doing some work to get it to fit properly.
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    Dave, OH
    by Dave from Fairport Harbor, Ohio on May 13, 2012
    The product works great easy to install and remove.
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Full StarFull StarFull StarFull StarFull Star
    michigan boater
    by Fredrick from Owosso, Michigan on June 09, 2011
    I have only used this product on two boating trips however it seems very well build and I had no problems.
    (1 of 2 people found this review helpful)
    Was this review helpful?
    Q:
    Will this fit my 2015 90 hp merc 4 cycle?
    A:
    It fits motors listed in the description. One exception is this will not fit 1.5L Family - the lower mount bolt centerline span is 3.44" and will not fit with their 3.25" span.


    Q:
    Will this fit a 2013 Mercury 60hp Bigfoot? I understand it has the same lower unit as the 75hp.?
    A:
    Attwood says that according to their records it doesn't say anything about fitting the 60 hp bigfoot, but that if it does have the same lower unit as the 75 then it should work.


    Q:
    Will this work on a 2011 75hp mercury optimax?
    A:
    No it will not. Yours should be the 1.5L family and this does not accommodate that.


    Q:
    Will this unit work on my 2013 Mercury 115 four stroke?
    A:
    Yes, this will work for your 115 horsepower Mercury motor.


    Q:
    Is there a model for a 40 hp mercury four stroke?
    A:
    Swivel Eze does not have a Lock'N Stow for your engine unfortunately.


    Q:
    Will this fit on my 2013 mercury 75 four stroke?
    A:
    This should work. Just note if you are wanting to install it on any other motors, that this will not fit 1.5L Family - the lower mount bolt centerline span is 3.44" and will not fit with their 3.25" span.


    Q:
    Will it fit a Mercury force 125, 1997 model?
    A:
    Attwood cannot confirm if it will or not, so you will need to measure. We have a spec sheet we can send by calling us at the the number at the top of the page.


    Ask a question
    Question & Answer Guidelines
    This product ships in 1 business day.
    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies