Marine Fiberglass Surface Prep, QT - Interlux

Product Description:
Fiberglass Surface Prep, YMA601 is the first step in a 2step system for removing mold release agents, waxes and grease from gelcoat prior to application of antifouling paint. The pigmented formula acts as a guide during the cleaning process.

Applies easily with Scotch-Brite pad. Rinse with fresh water or wipe clean to remove. Abrasive properties of the Fiberglass Surface Prep thoroughly cleans the gelcoat and provides key for a long lasting finish.

Fibreglass Surface Prep is a mould release agent remover which precludes the need for sanding bare GRP when used with International's Fibreglass No Sand Primer or Interspeed Aqua. Fibreglass Surface Prep thoroughly cleans the gelcoat and provides a key for Fibreglass No Sand Primer or Interspeed Aqua to be applied. Can be used to prepare aged and weathered alkyds prior to application of subsequent coats by softening the surface slightly.

Primers
Ask any boatpainting professional and he'll tell you that you cannot 'work down' to a high quality finish - you have to 'work up' and that means care and attention to preparation of the surface prior to applying topcoats.

The Interlux range of primers is designed to help you make this unseen but nevertheless vital area of maintenance as simple and efficient as possible. Care and attention in this area will maximise the performance of any topcoat and ultimately provide greater value for money in the longer term.

Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.

By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com’s option.