Your Price: $19.96
Save: $8.22
(29% Off $28.18)
Part # 18-5697 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 22 hrs 56 mins.
Replaces OEM part #
  • CHRYSLER FORCE F15164
  • OMC 385952
  • MERCURY MARINE 75384
  • MERCURY MARINE 75384
Mariner, Johnson, Evinrude, Mercury Marine, Force, Chrysler Marine Brush Kit BK900 - Arco
Your Price: $18.96
Save: $2.99
(13% Off $21.95)
Part # BK900 2nd Day Air for $2 More Eligible
SHIPS TOMORROW!* if ordered in 22 hrs 56 mins.

Replacement brushes
Fits: American made permanent magnet outboard starters
Mercury Marine 17631A1 replacement parts
Your Price: $36.71
Save: $11.24
(23% Off $47.95)
Part # TR218 2nd Day Air for $2 More Eligible

Brush kit
Sierra
Full StarFull StarFull StarFull StarFull Star
Based On 6 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Fixed the Problem!
by Daniel from Cotati, California on November 24, 2015
It happened twice! I got to the ramp and when I tried to start the motor, it sounded like a dead battery was trying to crank the motor. I knew the battery was good, almost new and fully charged. Saw some You Tube videos about rebuilding the starter, and/or replacing the brushes, and got just enough confidence to do the job myself. The link below shows a guy replacing the brushes on the exact same motor I have. The old brushes detached from the same brush at the same exact place as is shown in the video. This Sierra brush kit has more substantial cables than the OEM brushes I removed. Once installed, the motor fired right up! No problems since, and I am confident these will last for the rest of the life of the motor. Order shipped right away and was received on time. http://youtu.be/JxObec_bp00
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Starter Brushes
by Tom from Keswick, Ontario on August 22, 2014
I found what I wanted on the site, they were the correct brush kit. AND the kit was on my doorstep 4 days earlier than quoted. This is the second order I have placed for parts and I am very happy with Iboats.com....... Thank you. Tom
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Easy - Pezzy!
by James from Middletown, Indiana on April 07, 2012
After taking my starter apart and seeing the mess inside, and then viewing the new Brush Spring Kit I needed to replace, I really wondered if I would be qualified to really do it. I figured that since the price was within reason it would be worth while to attempt it. Everything was an exact fit and for someone who had never done this before I found it quite easy and the biggest surprise came when I held my breath, applied voltage to the starter, and the darn thing worked great. Total assembly time was about 15 minutes. Need second person when putting starter back together for an additional 5 to 10 minutes. remember: "NOTHING VENTURED, NOTHING GAINED"!!!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
riverbum
by Michael from Fuquay-Varina, North Carolina on January 18, 2012
Great
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great!!!
by Michael from Fuquay-Varina, North Carolina on December 05, 2011
Great!!!!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
So easy a caveman could do it
by James from Waller, Texas on November 28, 2011
Got the brushes in the time stated and was very pleased with the product . It is very easy to install and made a world of difference in the way my starter reacted.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Wrong brushes for my motor
by Linda L from Woodstock, Illinois on September 15, 2011
Your description of this brush kit says that it will work on 7.5 HP Mercury Motor with serial numberxxxxxx and beyond. The serial number of my motor is 6507461 which is higher than your listed number....the brush kit does not fit. I sent it back but have not yet received credit. Product may be ok but not for my motor
Was this review helpful?
Q:
Will this brush kit work for my mercury 150?
A:
Yes, this is a standard replacement kit for most Mercury engine models.


Q:
This will fit my 1995 40 horse 4 cylinder outboard model 1040200RB?
A:
Yes, this is a standard replacement kit for your engine.


Q:
How do get the plate holding the brushes back over the armature?
A:
It depends on the starter motor and so we would recommend contacting your engine dealer or order a repair manual we offer: http://www.iboats.com/Outboard-Manuals-Motor-Repair/dm/view_id.216505


Q:
Does this fit my 60 hp Mercury ?
A:
This is a specific brush kit for Arco's 6218 motor only.


Q:
1989 40 hp merc S# oc168446 are these the correct brushes?
A:
No what cross references with your OEM number is Arco's part number BK900.


Q:
Will this work on my old Mercury trim tilt motor? It's a 1977, it looks right but wanted to make sure, this is a 3-wire motor that's all round casing and two bolt hook up. Thanks?
A:
We will need to know engine model to cross reference numbers. This fits Mercury outboard motors with oildyne pump. So we will just need to know your HP to look up parts to confirm.


Ask a question
Question & Answer Guidelines
This product ships in 1 to 7 business days.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies