Medium Viscosity FLAG Epoxy Resin, Gallon - Mas Epoxies

FLAG is a resin designed for filleting, laminating, gluing, cold molding, and barrier coating. Mix with an appropriate MAS harderner in a 2:1 ratio. Pot Life: 15 min

FLAG Resin is a "medium" body resin specifically designed to perform as an adhesive and structural laminating foundation. The medium viscosity allows for the incorporation of fillers when fairing putties, gluing slurries and filleting systems are required.

FLAG is more reactive than our Low Viscosity Resin when mixed with Medium Hardener. This keeps fillets and fairing from slumping.

FLAG Resin is next day sandable when cured at 60 degrees F. and higher with Medium Hardener. FLAG Resin may be used with all MAS Hardeners, however, for filled applications we recommend our Medium Hardener.

Watch Instructional Video: MAS Epoxy Resins & Hardeners
Click DOWNLOAD and then click OPEN to view the video clip. Videos may take up to 10 minutes to download depending on internet connection speed.
DOWNLOAD Epoxy Resin & Hardener .wmv file (12.5MB)
Watch Instructional Video: MAS Epoxy Fillers & Additives
Click DOWNLOAD and then click OPEN to view the video clip. Videos may take up to 10 minutes to download depending on internet connection speed.
DOWNLOAD MAS Epoxy Fillers & Additives .wmv file (12.1MB)
MEASURED PROPERTIES:
Resin Viscosity	3000 - 3400 cps
Color	1 Gardener Max
EEW	190 - 200
Tg	140° F
Mix Ratio	2:1 Resin:Hardener
Peak Exohterm (30g batch)	360° F
Pot Life (30g batch)	15 min

“MAS Epoxies are the most advanced, high performance and user-friendly epoxy formulas in the world. We support all our products with knowledgeable, easy to reach staff, and provide a 100% money-back guarantee. Contact Mas Epoxies at 1-888-627-3769”