Megaware SkegGuard for Mercury Mariner

Refine Parts List
YEAR :

MANUFACTURER

ENGINE MODEL

YEAR

SKEGGUARD PART #

Mercury Mariner 50, 60 hp (Big Foot) 2 & 4 Stroke 2003-2010 27071
Mercury Mariner 70, 75, 80 hp 2 Stroke 1984-2009 27071
Mercury Mariner 90, 100, 115, 125 hp 2 & 4 Stroke Verado & Optimax 1983-2010 27071
Mercury Mariner 225 hp 2 Stroke 1996-2004 27211
Mercury Mariner 150, 175, 200, 225, 250, 275 hp incl. Verado & Optimax 2005-2010 27211
Mercury Mariner 135, 150, 175, 200 hp 2 & 4 Stroke 1978-2004 27061
Mercury Mariner 225 hp 2 Stroke 1978-1995 27061
Refine Parts List
YEAR :
Keelguard
Your Price: $89.95
Part # 27211 ValueShip™ Eligible
Your Price: $89.95
Part # 27071 ValueShip™ Eligible
Your Price: $89.95
Part # 27061 ValueShip™ Eligible
No Reviews  |  Write Review  |  Ask Question
Prevents or repairs damage to your skeg

FEATURES AND BENEFITS
  • Mirror Polished Marine Grade 316 Stainless Steel
  • Thickened lower wear tab protects against ramp dragging and is great for river running
  • Drain hole prevents against corrosion and freezing
  • Won't compromise performance
  • Do-it-yourself install in less than 10 minutes
  • Installs with as little as 2-3 inches of skeg remaining
  • Three year warranty

Easily installs! Click here for installation instructions

The new SkegGuard from Megaware KeelGuard provides the best of two worlds. It will protect and prevent damage to your motor's skeg and can also be used to repair and replace an already broken skeg.

The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable. This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The SkegGuard conforms to your lower unit to insure there is no discernable drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.

Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes, and will provide years of service and save hundreds of dollars in potential repairs.

If replacing an already broken skeg, the Megaware SkegGuard can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.

 
Megaware SkegGuard 27211 - Keelguard
Fits:
  • MERCURY MARINER:
    • 225 hp 2 Stroke 1996-2004
    • 150, 175, 200, 225, 250, 275 hp incl. Verado & Optimax 2005-2010
 
Megaware SkegGuard 27071 - Keelguard
Fits:
  • FORCE: 70, 90 hp 2 Stroke 1998-2002 (by Mercury)
  • HONDA: 75, 90, 115 hp 4 Stroke 1995-2007
  • MERCURY MARINER:
    • 50, 60 hp (Big Foot) 2 & 4 Stroke 2003-2010
    • 70, 75, 80 hp 2 Stroke 1984-2009
    • 90, 100, 115, 125 hp 2 & 4 Stroke Verado & Optimax 1983-2010
  • NISSAN MARINE: 70, 90, 115, 120, 140 hp 2 Stroke 1993-2009
  • TOHATSU: 70, 90, 115, 120, 140 hp 2 Stroke 1993-2010
 
Megaware SkegGuard 27061 - Keelguard
Fits:
  • MERCURY MARINER:
    • 135, 150, 175, 200 hp 2 & 4 Stroke 1978-2004
    • 225 hp 2 Stroke 1978-1995
Average Customer Review for Megaware SkegGuard 27211 - Keelguard
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull StarI Recommend this Product!
by a Customer from North Liberty, Indiana on April 26, 2016
The SkegGuard is the simplest and most effective piece of protective equipment I have ever purchased for my boat. Literally, I installed it in 10 minutes. Just two holes in my skeg, and it has been protected. I am an aggressive bass angler and for the past year, it has saved my skeg countless times. Beyond the protection, the stainless steel looks like extra flash and bling!
Was this review helpful?
Average Customer Review for Megaware SkegGuard 27071 - Keelguard
Full StarFull StarFull StarFull StarHalf Star Based On 5 Reviews | Write Review
Full StarFull StarFull StarFull StarFull StarSkeg gaurd
by Tony from Paragould, Arkansas on May 14, 2016
Easy to install. Boat seems to handle better also. Looks grea.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarSkegGuard
by Paul from Ottawa, Ontario on October 05, 2015
Fits well over broken skeg.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarSkeg
by Richard from Broken Arrow, Oklahoma on July 22, 2013
Haven't installed yet. Seems like it will be an easy install and that it will offer the necessary protection.
(0 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarNew owner - used engine
by Bernard from Athens, Alabama on May 05, 2012
The SkegGuard did the repair that I was hoping, and it is a pretty exceptional repair at that! Installation was simple, the directions were clear. However, the directions did not clearly state that the installation screws were of different sizes, and you need to determine which length you needed to use. Minor detail however.
(4 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starexcellent product!
by Carlos from Orlando, Florida on February 02, 2012
very happy to have installed on my 2008 Boston Whaler 150 Montauk 60 HP Mercury "BigFoot"! I Had my other boat with the same product installed as well. it's Recomended to boaters with skeg problems or for peace of mind to protect the skeg. Happy Boating! Stay Safe!
(3 of 3 people found this review helpful)
Was this review helpful?
Q:
I need a skeg guard to fit a 1976 OMC 120 HP I/O electric shift. Something that will fit overtop of an existing Skeg. Thanks?
A:
At this time, it does not look we carry a skeg guard in our inventory that matches up with your OMC engine. We might suggest that you post a question in our Forum page, which you can find here: http://forums.iboats.com/
Q:
50 hp mercury 1986 serial 659-0422?
A:
Unfortunately Keelguard doesn't make one for your motor. We don't have one available at this time.
Q:
I need a skeg guard for 2012 115HP 2 stroke Mercury OptiMax?
A:
27071 is the one you need for your motor.
Q:
I need one for evenrude 48 spl?
A:
We will need you to confirm the year of your outboard to confirm if we have one for your motor.
Q:
I have a 2000 mercury 225 efi what skew guard does it use?
A:
You need 99021 for your outboard.
Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies