Refine Parts List

Model

Serial number

Sierra Impeller Repair Kit

#1 Units with plastic flush screw in gear housing 2495186-2763441 18-3217
#1 Units (Except MR-ALPHA) w/o flush screw in gear housing 2763442-6854392 18-3217
MR/ALPHA I 6854393-D594568 18-3217
ALPHA I - Generation II D494569 & Above 18-3214
Water Pump Impeller Repair Kit - Sierra
View Larger Photo
Representative photo only.
Price: $24.22
Save: $19.27
(44% Off $43.49)
Part # 18-3214
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
Price: $31.71
Save: $16.61
(34% Off $48.32)
Part # 18-3214D
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
No Reviews
Price: $30.52
Save: $17.47
(36% Off $47.99)
Part # 18-3216
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
Hurry! Only 1 left in stock
No Reviews
Price: $18.98
Save: $33.51
(63% Off $52.49)
Part # 18-3217
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
Price: $31.85
(Out of stock)
Save: $26.47
(45% Off $58.32)
Part # 18-3217D
2nd Day Air for $2 More Eligible
No Reviews
(Out Of Stock)
Price: $40.99
Save: $12.00
(22% Off $52.99)
Part # 18-3237
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
No Reviews
Price: $29.03
Save: $16.16
(35% Off $45.19)
Part # 18-3046
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
Price: $32.03
Save: $12.96
(28% Off $44.99)
Part # 18-3047
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
Price: $21.40
Save: $16.59
(43% Off $37.99)
Part # 18-3081
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
Johnson Pump 09-1026B replacement parts
Price: $23.05
Save: $7.94
(25% Off $30.99)
Part # 18-3080
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
No Reviews
Water Pump Impeller Kit - Sierra
Price: $39.34
Save: $10.65
(21% Off $49.99)
Part # 18-3075
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
Price: $28.73
Save: $14.26
(33% Off $42.99)
Part # 18-3076
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
Price: $86.43
Save: $20.06
(18% Off $106.49)
Part # 18-3078
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
No Reviews
Price: $23.01
Save: $10.98
(32% Off $33.99)
Part # 18-3079
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
No Reviews
Price: $49.94
Save: $4.55
(8% Off $54.49)
Part # 18-3510
2nd Day Air for $2 More Eligible
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
Hurry! Only 1 left in stock
No Reviews
Price: $67.79
Save: $11.30
(14% Off $79.09)
Part # 59362Q08
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
No Reviews
Price: $31.86
Save: $5.31
(14% Off $37.17)
Part # 8M0104229
SHIPS TODAY!* if ordered in 2 hrs 47 mins.
No Reviews
Sierra
Mallory and Sierra Impeller Repair Kits for Mercruiser engines.
Full StarFull StarFull StarFull StarEmpty Star
Based On 20 Reviews | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Will not fit 1998 Mercury 60HP 2 stroke!
by Randy from Fort Dodge, Iowa on August 14, 2016
Impeller was too big and gaskets and plate were different from what was on there. Customer service rep told me this kit would work after telling him model and serial# on motor...
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Impeller repair for my 1995 Mercury
by Peter from Lombard, Illinois on August 10, 2016
The kit came quickly and the repair went smoothly. I was back out in the water enjoying my boat again!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
iboats is the best!
by Anthony from Johnsburg, Illinois on June 26, 2016
Great product, perfect fit for my 1990 Mariner 115. iboats products consistently work great and are shipped quickly. Customer service always steers me to the right product. Thanks for helping me keep that old motor running!
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
impeller kit
by Charles from Somerset, Kentucky on May 21, 2016
impeller kit and gaskets fit perfect for my Force by Mercury.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
impeller kits
by Stephen from Newton, Alabama on September 13, 2015
I bought two impeller kits for my outdrive one worked and one didn't. I ordered another one from a different vender, and replaced the one that didn't work. When we took the out that didn't work one of the blades were deformed. The one we put back in work OK. Guess it was just a bad impeller.
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Wrong part
by Darryl from Laotto, Indiana on August 24, 2015
It did not look like my parts
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Adequate parts, OEM is better
by Michael from Grand Blanc, Michigan on June 08, 2015
This kit seemed fine. I think I'll stick with OEM from now on though. The rubber lip on one gasket is thinner and the way it was packaged in a bag caused the thin gasket to wrap around the metal plate and rip slightly. This might be one part to not try to save a few bucks on, in my opinion.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Happy with all. Looks great
by Richard from Bolivia, North Carolina on April 16, 2015
Got it fast and looks good
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
We are very satisfied
by Leonard from Darlington, South Carolina on April 15, 2015
We just purchased a houseboat that came with a 98 Honda 4 stroke engine that needed a water pump. We called dealerships (which didn't have it and couldn't get it) and search the web, when we came to iboats web page we found what we needed and it was reasonable priced. We ordered it on Tuesday it arrived on Friday in time for our fist weekend on our boat. Thanks iboats
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Force water pump kit
by Steven from Monticello, New York on July 31, 2014
Since this is a spare kit, I haven't used it. The kit appears to be identicle to the original. Shipping was quick and price was good.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great parts wrong choice
by Charles from Kimball, Michigan on May 30, 2014
What I thought I was ordering turned out to be incorrect. But the quality of the parts recieved are top notch. Although still waiting on a refund.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Pats Missing
by Jim from Pensacola, Florida on January 15, 2014
Package was missing 2 O rings due to knife cut along side and parts dropped or were taken out. Iboats shipped complete package, ASAP! I have had nothing but GOOD results for Sierra products.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Way easier than I expected
by Joe from Cary, North Carolina on September 21, 2013
First time I did this and it was really simple. Parts fit perfectly. There are a number of good YouTube videos on how to do this, so if you are at all comfortable with a wrench, no worries on doing a good job. Do put a pad of cardboard under the outdrive when you split the case because it will slobber some oil - maybe 3 tablespoons.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
pump impeller kit
by Rodger from Guntersville, Alabama on July 10, 2013
i liked the kit
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
NO FACE SEAL
by Jon from New Albin, Iowa on April 10, 2013
I purchased 2 of these kits, one for my 60hp 4 stroke bigfoot, and one for my freind's 60hp 4 stroke standard. Repaired mine first, kit is fine for that but in product description, it should clearly state "FACE SEAL SOLD SEPERATELY". The second issue I have is that this same kit is listed for the standard lower unit. Per my Mercury shop manual, this is incorrect. I still need to contact iboats in this reguard. The no face seal warning, and incorrect part# reference is what is dragging this review down, what I was able to install though was fine.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
5 star rating
by Brian from Holiday, Florida on January 25, 2013
This was my first order with iboats. Fast service. Product as described. Reasonable price. Will use again.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Water Pump impeller repair kit
by Vernie from St. Augustine, Florida on November 18, 2012
The kit was shipped promptly and was the exact fit for my Honda outboard. This is a great place to shop for outboard motor parts.
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Incomplete kit
by James from Waco, Texas on July 31, 2012
This kit did not include a face seal for the water pump. This is a critical part and should be included in the kit. The rest of the parts were acceptable, but make sure to order the face seal separately.
(5 of 5 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
worked great
by Zach from Leawood, Kansas on April 03, 2012
Worked great, make sure you order a shaft seal too this doesnt include one
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
It's an impeller you will get.....eventually.
by Jonas from Bedford, Texas on July 06, 2010
The impeller is an impeller, be careful when ordering because it will take 4-7 days for them to get around to shipping it. Returns take more than 2 weeks to credit. Be careful.
(34 of 45 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 20 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Fits Perfect!
by Scott from Harrisburg, South Dakota on June 23, 2016
Twin 5.7L Mercruiser 260hp Alpha 2 - fit was perfect, worked great.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
fast shipping thanks
by Ernest from West Monroe, Louisiana on June 13, 2016
great product thanks
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
No problem for 1986 Alpha 1 Gen 1
by Stephen from Greenwood Lake, New York on October 08, 2015
Product quality is good. I had no issues fitting to 1986 Alpha one gen one drive. Seals-gasket, no housing or base. Don't forget to replace the base seals.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Eater pump kit
by Randal from West Frankfort, Illinois on September 12, 2015
Great price and great on time service!!!!!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
as expected
by Larry from Waxahachie, Texas on April 27, 2015
Part was what I expected and arrived when promised.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Good price.
by Jeremiah from Arkansas City, Kansas on August 03, 2014
Quality part and good price.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
perfect parts
by RJ from bellevue, Nebraska on May 30, 2014
This will replace your old water pump and gaskets. My 90 hp mercury has never ran this cool after replacing the water pump with these parts. Not very hard to install either. Just make sure the shifter is in the drive forward position BEFORE dropping the lower unit.
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
prompt and as described
by Mark from Cordova, South Carolina on April 20, 2014
Shipped quickly, all the parts I needed
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Nice Product
by Michael from Salado, Texas on July 30, 2013
Very complete product at a competitive price. I will certainly purchase again.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
No Problems
by David from Phoenix, Arizona on July 17, 2013
Correct Part. Worked Fine
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Water pump
by Dave from Flint, Michigan on May 21, 2013
Nice pump
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
product should be good, I have not installed it yet.
by Dimitri from Sterling, Virginia on November 27, 2012
product should be good, I have not installed it yet. Neet to know the part number for the cop section of the water pump and also the bottum. just in case
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
water pump kit
by Roger from Palmdale, California on July 24, 2012
I'm very pleased with the parts service. Thank You iboats Roger M Nicholas
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
water pump kit
by Christopher from Kernersville, North Carolina on July 07, 2012
Thanks this fit great and did the job and SUPER FAST SHIPPING Had it shipped USPS your web site said it would take 14-16 days only took 7 Thanks
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Water Pump Kit
by David from Fort Myers, Florida on May 08, 2012
One of the best ways to purchase boat parts and the service is fast and priced right.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
water pump repair kit
by Michael from Chino, California on May 05, 2012
Perfect for what I needed, good price and quick deleivery
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great Item
by Reginald from Milwaukee, Wisconsin on April 08, 2012
This was a Great transaction!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great Price
by Thomas from Jacksonville, North Carolina on March 26, 2012
I ordered TWO with this company (with shipping), and the price was less than ONE kit through my local shop. Woohoo!
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
wrong kit
by Timothy from Naugatuck, Connecticut on June 12, 2011
Its probably my fault but I'm still not happy now I have to return it and order the right one I really don't like ordering stuff like this online
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Review for Sierra 18-3217 Water Pump Kit
by a Customer on September 04, 2009
THIS KIT WORKED GREAT IT WAS EASY TO PUT IN GREAT PRICE AND THE SHIPPING WAS FAST GREAT JOB GUYS THANK DANO
(1 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Based On 1 Review | Write Review
Full StarFull StarEmpty StarEmpty StarEmpty Star
missing required O-ring
by Greg from Belle Plaine, Kansas on May 25, 2011
I bought this kit to repair a Sherwood model R991 pump. To my dismay, it did NOT come with the rubber O-ring that seals the cover to the pump housing. I had to purchase the O-ring from another store to complete the repair. The gaskets shown in the picture do NOT fit a Sherwood model R991.
(4 of 4 people found this review helpful)
Was this review helpful?
Average Customer Review for Impeller Kit - 18-3047 - Sierra
Full StarFull StarFull StarFull StarHalf Star
Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Nice kit!
by Larry from Bakersfield, California on May 26, 2014
All you need to rebuild your pump... it's all there in this kit!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Impellers Impellers
by Jon from Benbrook, Texas on August 30, 2011
What can I say? Stock part impellers are what they are. But the order process and shipping was as easy as one could ask for.
(0 of 1 people found this review helpful)
Was this review helpful?
Average Customer Review for Water Pump Impeller Kit - 18-3081 - Sierra
Full StarFull StarFull StarFull StarEmpty Star
Based On 8 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Quickness of service
by Darvin from Burnsville, Minnesota on August 28, 2016
Received the impeller kit a few days earlier than they said. A real plus!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
It pumps water
by Paul from Brier, Washington on April 25, 2013
It works
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
18-3081 Impeller Kit
by E David from Magnolia, Texas on September 02, 2012
The O-rings are the wrong size, but you can make them work. This is a good value kit!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
water pump
by Shawn from Simi Valley, California on July 18, 2012
looks like it will work won't get to try it cause i purchased it as a spare so maybe next season but liked the price and delivery thanks
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
O-ring didn't fit
by James from Little Rock, Arkansas on July 09, 2012
Kit for a 1999 5.4 GSI impleller fit fine but o-rings were wrong size. Had to get seperate, so why buy the kit?
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarEmpty StarEmpty StarEmpty StarEmpty Star
Spend Extra $, Buy OEM...
by James from Little Rock, Arkansas on July 09, 2012
Kit had wrong o-ring...tried to get just O-ring replacement, but Sierra doesn't make thus, iboats said I need to return old kit, and get a new kit. But, new kit still has wrong 0-ring, so how is that correcting my probem? Even thought Sierra made mistake with wrong O-ring in kit, Iboats wouldn't fix problem by send me a correct OEM o-ring. I had to buy $2 part. My advice...forget Sierra and Iboat combo spent the extra $ and buy OEM. This would have saved me hours of headach.
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
water pump kit purchase
by William from Deptford, New Jersey on April 21, 2012
quick service and good price
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Looks good but time will tell.
by Bobby from Huntsville, Alabama on February 08, 2012
This is going on a 1999 VP SX. The size/length of the paddles are identical to the OEM VP part I had in last year. The O-ring for the pump is just a hair big but went together just fine. I did notice the brass splined section of the impeller was actually longer than the OEM piece and made more contact on the shaft of the pump. Looks like a good thing to me. My 1 season old VP impeller was missing 2 and 1/2 of the paddles(~50 hours) Ill post up the results from this impeller at the end of the 2012 season. Gave it a 4 based on o-ring size.
(3 of 5 people found this review helpful)
Was this review helpful?
Average Customer Review for Water Pump Impeller Kit - 18-3075 - Sierra
Full StarFull StarFull StarFull StarFull Star
Based On 5 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Very good
by Marty from Fort Collins, Colorado on July 23, 2015
All the parts were there. Very pleased
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
thank you
by Grant from Ossian, Indiana on February 17, 2015
great
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
No problems
by Jason from West Bloomfield, Michigan on July 16, 2014
I can't complain. The part came in sooner than expected. It was a perfect fit and now my boat runs without overheating. Its been a month and still no problems.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Water pump impeller kit
by Brad from Saint Augustine, Florida on November 04, 2013
Works great!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
great porduct
by Michael from McAlester, Oklahoma on September 06, 2011
was what I expected and arrived a day early
(3 of 3 people found this review helpful)
Was this review helpful?
Average Customer Review for Impeller Kit - 18-3076 - Sierra
Full StarFull StarFull StarFull StarFull Star
Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Impeller Kit - Sierra
by Michael from Taylors, South Carolina on November 11, 2012
Delivered ahaed of time.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Correct and Fast
by Gerard from Oak Creek, Wisconsin on May 29, 2012
Item was exactly what I ordered and arrived very quickly. 100% satisfied.
(0 of 1 people found this review helpful)
Was this review helpful?
Q:
Does this kit fit a bf90ayjhta Honda motor and not what kit does?
A:
We do not have original information for the Honda Jet Outboard. So we cannot match up kit without OEM number.


Q:
I have an Mercury Engine Serial?
A:
If you can confirm serial number we can match it up.


Q:
Where is the face plate mentioned in the comments?
A:
Faceplate is the bottom left part in the picture. 18-2566 is the part number for it.


Q:
Does this kit contain everything needed to rebuild water pump?
A:
It is an impeller kit, so it is a repair kit mainly for the impeller. You may want to do a search for a complete water pump kit. However, the main component in any water pump assembly that needs repair/service is the impeller, so this may work for your purposes.


Q:
Whats the diffrence between same part but with a D at the end of it.?
A:
The D just indicates the packaging, all parts contained in kit are the same.


Q:
Does this fit a 1992 alpha one gen 2 sterndrive?
A:
Yes this will work for your outdrive.


Q:
Will this fit a 1987 Mercruiser Alpha I gen 1 Water Pump?
A:
Yes it should, provided that your serial number matches up. This is a standard replacement for Alpha 1/Gen 2 Mercruiser engines.


Q:
I have a 1998 force 120 elpt with a 4 bolt metal water pump cover ,will the 18-3214 kit work?
A:
If it is an Alpha 1/Gen 2 engine and the serial number matches up, then it will work. For more assistance, feel free to call our sales department at (800)-914-1123.


Q:
What is the impeller for a 1977 120 horse Chrysler?
A:
According to our charts, the one for your engine would be the 18-3085, assuming your model is a 1206/1207HA-HE, or 1208HA-HC engine.


Q:
Looking for a water pump kit for a 1976 120 horse Chrysler engine?
A:
We would need to know the original part number of the kit. You could consider contacting a mechanic or Mercury to get that and we could cross reference it for you if you call the number at the top of your screen.


Q:
Need impeller for my Reinell boat. Motor is a Volvo Penta 8.1 GXI. What do I order?


Q:
What impeller do I need for my 2006, Volvo 5.0 GXI-F?
A:
You need 18-30778 for your motor.


Q:
Will this fit a pump from a 1984 AQ125 penta?
A:
No it will not, you will need 18-3075.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies