Johnson / Evinrude / OMC 510364 replacement parts
Price: $11.77
Save: $8.13
(40% Off $19.90)
Part # 18-5224-9
2nd Day Air for $2.99 More Eligible
SHIPS TODAY!* if ordered in 8 hrs 49 mins.
Price: $31.87
Save: $12.64
(28% Off $44.51)
Part # 18-5225
2nd Day Air for $2.99 More Eligible
Price: $128.75
Part # 18-5226
2nd Day Air for $2.99 More Eligible
SHIPS TODAY!* if ordered in 8 hrs 49 mins.
No Reviews
Price: $37.27
Save: $12.63
(25% Off $49.90)
Part # 18-5750-9
2nd Day Air for $2.99 More Eligible
SHIPS TODAY!* if ordered in 8 hrs 49 mins.
Chris Craft 580339 replacement parts
Price: $3.79
Save: $2.20
(36% Off $5.99)
Part # 18-5752
2nd Day Air for $2.99 More Eligible
SHIPS TODAY!* if ordered in 8 hrs 49 mins.
Sierra
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Good product.
by Kevin from Seward, Nebraska on May 26, 2012
Product worked for me. Thanks
(2 of 5 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarHalf Star
Based On 7 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Great product
by Josh from Murfreesboro, Tennessee on October 27, 2016
Couldn't fine spark plug wires for my 1989 merc xr4, so I bought this kit and rebuilt them. My boat runs better than it has in a few years
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty Star
Fast delivery but no instructions and wrong part included
by Tim from Winston Salem, North Carolina on May 20, 2016
I received my spark plug wiring kit, however there are no instructions and did not include the correct tip clips to put on the spark plugs , now I have to return them or spend more money and time and order new boots with correct tip clips included....Very frustrating! Save yourself time and order the spark plug wires already assembled for your model engine. What a PIA this turned out to be!
(1 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Just what I was looking for!
by David from Dighton, Kansas on June 07, 2013
Good quality, just what I expected.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
good
by Donald from Boaz, Alabama on May 04, 2013
they are working out great and alot cheaper then factory wires
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
wire kit
by Gerald from Seatac, Washington on December 14, 2012
Very high quality kit. Works well with new plug boot. I am very pleased with product.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Spark Plug Wire Kit
by Deborah from Whitesburg, Kentucky on May 01, 2012
We are very pleased with the service and how fast we recevied it.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
red
by Kevin from Spanish Fort, Alabama on March 25, 2011
Must have the sparkumup wires
(7 of 26 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Spark Plug Boot
by Gerald from Seatac, Washington on December 12, 2012
I work on alot of old outboard motors. With this part along with the Universal Spark Plug Wire Kit I can bring the spark back to the old motors.
(4 of 5 people found this review helpful)
Was this review helpful?
Average Customer Review for Sierra 18-5752 Universal Spark Plug Boot
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
spark plug boots
by Walter from Goldsbro, North Carolina on September 07, 2014
Boots look good. I haven't installed them yet,but I do have a question about the other end attachment boot. They were not included in my order. Will call you about this.
(0 of 1 people found this review helpful)
Was this review helpful?
Q:
Will this work on a 1998 Mercury 200 EFI #0g725287?
A:
No it will not. You will need the boot/terminal kit, part number 63709A1.


Q:
I have a 1981 115 HP Mercury outboard Serial #7171333. What are the proper spark plug wires for this motor?
A:
You will need part number 18-5227-1.


Q:
Will this fit my 1985 Mercury 75hp 4cyl 2 stroke. SN# 06614796?
A:
No it will not. You will need look at spark plug wires such as part number 18-5227-1.


Q:
What plug wire kit will I need for a 1988 Mercury 100 HP ELPTO. Serial starts with OB?
A:
We cross reference engine parts by complete serial number. To assure you are getting the right wires we need the complete number.


Q:
Will this terminal work on a 1977 115 hp mercury outboard1150 and do you sell the crimping tool?
A:
Yes this will work with your outboard. We do not sell crimping tool, but you can get that at a local automotive store.


Q:
Will these fit 2001 Johnson outboard, V4, model J135PLSIF ?
A:
No this will not work with your outboard unfortunately. It is not available separately on your motor.


Q:
This at.set or only one?
A:
This is a set of 10.


Q:
Will this fit a 73' merc 500?
A:
Yes this will work with your outboard.


Q:
I have a 1980 70hp ob, three cylinder Mariner. I would like to replace the plug wires. They approximately 18" long. Do you have a set that will fit or do you make custom lengths?
A:
18-5225 is a build your own type kit. The kit comes with a roll of wire and a three different fittings for outboard engines.


Q:
How do I crimp them on??
A:
Installation is stripping wire and then installing terminal on and then crimping it with a crimp tool. You will need that.


Q:
Ok, more specific here, what style of crimp do I use??
A:
Sierra states that you can use any sort of crimp tool to crimp these terminals.


Q:
Would this be a good fit for a 2002 Mercury 125 4 cyl?
A:
No this will not specifically work for your motor.


Q:
Are these ok for a 1993 Evinrude 175 HP?
A:
Yes.


Q:
Is it good for a older mercury 25 HD 25 hp?
A:
Hi Ron- The Sierra 18-5224-9 will work with the Mercury 25hp ignition wire terminal.


Q:
How does thie silver tip clip go thru the boot and clip onto the spark plug.?
A:
Installation is stripping wire and then installing terminal on and then crimping it. It should like the spark plug 18-5230-9-1 on our site. If you have further questions or need more assistance feel free to call us.


Q:
Will this fit a 1996 75 hp force motor?
A:
No you will need 63709A1 for a kit.


Q:
Is this boot ok for use on a 1994 yamaha 70 TLRS?
A:
It is universal in its and accepts 8mm Universal Spark plug boot. We do not have the original information to confirm your original size. Your OEM number you need is 6G1-82370-21-00.


Q:
I need spark plug wire kits for mercury optimax 225 hp 1998?
A:
According to Sierra, this is the best possible replacement that we have for your engine: http://www.iboats.com/Wiring-Plug-Set-18-28081-Sierra/dm/view_id.1354118


Q:
Can I use the Universal Spark Plug Boot - 18-5752 - Sierra as well, I like the newer type terminal connector vs this spring type?
A:
Yes, either spark plug boot will work. It just depends on your preference, whether you want to use the clip-on type, or the spring-type.


Q:
Would it fit 1985 blackmax 150 hp?
A:
Yes. The kit comes with a roll of wire and a three different fittings for outboard engines.


Q:
Will this work for a Mercury, 50 hp, 2 stroke, 3 cyl. outboard?
A:
Yes. The kit comes with a roll of wire and a three different fittings for outboard engines.


Q:
Would this work with an older Mercury 20 horse 200 series lightning ignition?
A:
Yes. The kit comes with a roll of wire and a three different fittings for outboard engines.


Q:
I see these fits most motors... Will it fit an 1985 75hp tower of power?
A:
Yes as there are 3 different end fittings to fit outboard motors.


Q:
Would this fit a 1976 Mercury 1150?
A:
This will not come with the boot you will need to adapt to your motor. 18-5227-1 is a direct cross reference for your motor.


Q:
Would this work on a 1978 1150 merc?
A:
These fit most outboard motors as there are 3 different end fittings to fit different motors.


Q:
Will this kit work with a 1979 Mercury 1150 outboard 115 HP motor?
A:
These fit most outboard motors as there are 3 different end fittings to fit different motors.


Q:
I have a old 1967 Mercury 500 would one of these wire kits work on it?
A:
This would not be for your motor, but we would need serial number to verify part number. Contact us at the number at the top of the page with serial number and we can look into it.


Q:
Would it fit a 1995 200HP Mariner EFI?
A:
Yes. The kit comes with a roll of wire and a three different fittings for Mercury/Mariner engines.


Ask a question
Question & Answer Guidelines
This product ships in 1 to 3 business days.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies