Moeller 3, 6 & 9 Gallon Withdrawal Assembly

Fuel Gauge Assembly for Ultra 3/6/6BOW/9GAS/12 GALLON LOW - Moeller
Fuel Gauge Assembly for Ultra 3/6/6BOW/9GAS/12 GALLON LOW - Moeller
Your Price: $12.00
Save: $1.19
(9% Off $13.19)
Part # 621001-10 ValueShip™ Eligible
Withdrawal and gauge/withdrawal assemblies for Moeller fuel tanks.
Fuel Withdrawal Assembly for Ultra 3/6 - Moeller
Fuel Withdrawal Assembly for Ultra 3/6 - Moeller
Your Price: $7.25
Part # 621002-10 ValueShip™ Eligible
Withdrawal and gauge/withdrawal assemblies for Moeller fuel tanks.
Fuel Gauge Assembly for 3/6/9/12 Low - Moeller
Fuel Gauge Assembly for 3/6/9/12 Low - Moeller
Your Price: $13.09
Save: $3.90
(22% Off $16.99)
Part # 031001-10 ValueShip™ Eligible
Withdrawal and gauge/withdrawal assemblies for Moeller fuel tanks.
Fuel Withdrawal Assembly for 3/6/9 - Moeller
Fuel Withdrawal Assembly for 3/6/9 - Moeller
Your Price: $13.13
Save: $1.16
(8% Off $14.29)
Part # 031002-10 ValueShip™ Eligible
Withdrawal and gauge/withdrawal assemblies for Moeller fuel tanks.
Fuel Withdrawal Assembly for 12 Low - Moeller
Fuel Withdrawal Assembly for 12 Low - Moeller
Your Price: $13.09
Save: $3.90
(22% Off $16.99)
Part # 031003-10 ValueShip™ Eligible
No Reviews  |  Write Review  |  Ask Question
Withdrawal and gauge/withdrawal assemblies for Moeller fuel tanks.
Fuel Gauge Assembly for 12 High - Moeller
Fuel Gauge Assembly for 12 High - Moeller
Your Price: $13.09
Save: $3.90
(22% Off $16.99)
Part # 031004-10 ValueShip™ Eligible
No Reviews  |  Write Review  |  Ask Question
Withdrawal and gauge/withdrawal assemblies for Moeller fuel tanks.
Fuel Withdrawal Assembly for 12 High - Moeller
Fuel Withdrawal Assembly for 12 High - Moeller
Your Price: $13.33
Save: $0.96
(6% Off $14.29)
Part # 031005-10 ValueShip™ Eligible
Withdrawal and gauge/withdrawal assemblies for Moeller fuel tanks.
Flexible Fuel Pickup 36
Your Price: $43.30
Save: $24.99
(36% Off $68.29)
Part # 635022-10 ValueShip™ Eligible
Flexible fuel pickups make installation a cinch. No need to cut for smaller tanks.
Flexible Fuel Pickup 22
Your Price: $24.26
Save: $13.93
(36% Off $38.19)
Part # 635021-10 ValueShip™ Eligible
Flexible fuel pickups make installation a cinch. No need to cut for smaller tanks.
Moeller

A marine fuel withdrawal assembly helps connect the components of the tank to the tank shell. This assembly replaces numerous smaller parts used for the same purpose, reducing the chances of system failure. The Moeller Withdrawal Assembly decreases the chances of shearing forces such as falling, dropping, bumping and more from damaging the fuel tank.

  • Connects tank components to tank shell
  • Decreases sheering forces
  • Easy to setup

This kit contains a float/gauge, threaded cap, clear sight lens, 'O' rings and a plastic washer.

Features of Fuel Gauge Assembly

  • Connects tank components to tank shell
  • Decreases sheering forces
  • Easy to setup
  • Includes a float/gauge, threaded cap, clear sight lens, 'O' rings, plastic washer

Specifications For Part # 621001-10

  • For three and six gallon Moeller tanks

Specifications For Part # 621002-10

  • For three and six gallon Moeller tanks
  • 1/4 NPT

Specifications For Part # 621003-10

  • For three and six gallon Moeller tanks
  • 1/4 NPT

Specifications For Part # 621004-10

  • For three and six gallon Moeller tanks
  • 1/4 NPT

Specifications For Part # 621005-10

  • Fits 2010 & Older 6 Bow, 9 Gas and LPT 12 fuel tanks
  • Includes mod plate gasket and mounting screws

Specifications For Part # 621006-10

  • For three and six gallon Moeller tanks
  • 1/4 NPT

Specifications For Part # 621007-10

  • For three and six gallon Moeller tanks
  • 1/4 NPT

Specifications For Part # 031001-10

  • For 3/6/9/12 Low tanks
  • Replaces counterpart in older Moeller and Tempo fuel tanks

Specifications For Part # 031002-10

  • For three and six gallon Moeller tanks

Specifications For Part # 031003-10

  • For 12 gallon (Low) tanks

Specifications For Part # 031004-10

  • For 12 gallon high profile portable gas tanks
  • Compatible with older Moeller and Tempo fuel tanks

Specifications For Part # 031005-10

  • For 12 gallon high profile portable gas tanks
  • Compatible with older Moeller and Tempo fuel tanks
Full StarFull StarFull StarFull StarFull Star Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Starfuel guage
by Mark from Simi Valley, California on September 05, 2013
Excellent!! perfect fit and all in order..many thanx!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Startank part
by Keith from Ninety Six, South Carolina on August 24, 2014
product was just as ordered as shipping was on time
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starfuel withdrawal assembly
by James from Holt, Florida on March 30, 2012
This part was very hard to find, Thanks Iboats
(5 of 5 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarHalf Star Based On 4 Reviews | Write Review
Full StarFull StarFull StarEmpty StarEmpty StarEasy to install works fairly well
by Joshua from Prince George, Virginia on August 18, 2015
Installation was simple. does read all the way to full but gives a close idea where the fuel level is.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starlike new
by Steven from Chrisman, Illinois on May 29, 2015
Fit my ole 12 gallon tank perfect. Can actually see how much fuel I have now.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarFuel gauge assembly
by Carl from Divide, Colorado on December 21, 2013
As Advertised, good product
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarRare Rating
by Roger from Glasford, Illinois on August 04, 2013
Don't normally do reviews for free but I'll make exception once. Part was exactly as ordered. Assembled the parts and inserted into my tank. The level gauge worked fine. I'm satisfied.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star Based On 4 Reviews | Write Review
Full StarEmpty StarEmpty StarEmpty StarEmpty StarNot what expected.
by Randy from Cleveland, Alabama on November 13, 2015
I ordered this for the gas tank that came with my boat. All the pictures looked exactly alike. It said this one would fit. I have a 6.6 gal tank with the small screw in neck. Once I receive this product it looked like I may screw down on filler cap area. It does not. II ended up buying a new 6.6 gallon tank and it would not work on it either. So now it's trash and a waste of money.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarFuel withdrawl assembly
by Carl from Divide, Colorado on December 21, 2013
As advertised good product. Prompt shipping!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starmatches perfectly
by Mark from Taylorsville, Kentucky on September 23, 2013
I bought this as a spare just in case they quit making them for older tanks like mine. I have seen the alcohol in fuel destroy the fuel hoses on trimmers and blowers I own and figure it will attack my ancient pickup tube one of these days.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarAs you would expect
by Frank from Decatur, Tennessee on July 23, 2011
I ordered a part and received it is 3-4 days and the cheapest shipping of anyone.The item was an exact fit as I expected. Very happy with my order.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarHalf Star Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarEmpty StarFuel Withdrawal assembly
by Keith from APO, US Military AP on October 09, 2013
Not exactly what I needed but I was able to mak eit work with out much of an effort.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarExactly what I needed!
by Patrick from Novi, Michigan on July 25, 2012
I had a hard time finding the part I needed locally for my 12 year old Moeller fuel tank in my duck boat, so I ordered a new fuel withdrawl (pickup) assembly from iBoats.com. The price I paid was VERY competitive! Shipping was cheap! The part arrived about 2 days earlier than the online shipping estimate when I ordered it and it was exactly the correct factory original part that I needed! Thanks iBoats! As Arnold would say "I'll be back!"
(1 of 1 people found this review helpful)
Was this review helpful?
Q:
Since the fuel line fitting is ultrasonically welded to tank, how do i replace internal tank fuel line?
A:
The fuel line is actually threaded, not ultrasonically welded.
Q:
What size is the part that screws into the tank?
A:
Moeller does not have that information. It is a replacement part for the Ultra 3 gallon and 6 gallon fuel tanks. That is what this part is called for.
Q:
Will this withdrawal assembly fit 12 gallon model Ultra PBW Part #630012?
A:
You will have to contact Moeller. The fuel withdraw assembly for your tank is now discontinued.
Q:
I am trying to replace a fuel withdrawal assembly for a Mercury 6.5 gal tank that I use with a Mercury 90 HP? What assembly would be compatable to this tank?
A:
Hi- This would work for a Moeller fuel tank that coupled with the correct connector works with the Mercury 90hp outboard engine you have. If you do not have the Moeller fuel tank it needs to be with the correct tank manufacturer to meet your demand. Please let us know if we can help further on this fuel withdrawal assembly for the Ultra 3/ 6 gallon fuel tank.
Q:
Will it fit polar boat fuel tank?
A:
This is a universal piece so it's supposed to fit all fuel tanks.
Q:
Will this fit a Tempo Ultra3gas tank # 620003?
A:
This fits the old 031103, 031106, and 031109.
Q:
Do you have any idea where I can purchase a Fuel guage assembly?
A:
This is a fuel gauge assembly for the Ultra 3/6/6BOW/9GAS/12 gallon low.
Q:
WILL THIS FIT A tEMPO uLTRA3GAS #620003?
A:
Yes this fits the 620003 gas tank.
Q:
I have a lowe 20 pontoon my tank is a 20gallon it 27-15-18 what type do i need?
A:
This particular fuel gauge assembly is for only Moeller's fuel tanks. It is for the Ultra 3/6/6BOW/9GAS/12 Gallon low tanks. 20 gallon fuel tanks are typically below deck tanks that require a fuel sending unit to wire up to a fuel gauge. If you have further questions contact us at the number at the top of the page.
Q:
Will this part work with my Lowe 24 gallon tank my tank is 18 inches deep?
A:
You will need to verify sizes because this features 3/8 in. NPT and 1/4 in. NPT for barb. No need to cut to size for smaller tanks.
Q:
I have a Tempo tank F128 28 1/4 length 15 wide and 8 1/2 tall i need a withdrawal assembly for it the piece has float and all built into it and fuel line screw in conection.The conection is stripped out for fuel line to connect which assembly do i need.The 621003-10 or the 621004-10 or is the wrong ones for my tank?I think it is a 10 or 12 gal?
Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies

Product Families