Nissan Carburetor Kits

Refine Parts List
HP/Model

(4 to 70)

HP/Model

Replaces

Number Required Per Engine

Mallory Carburetor Kit

Sierra Carburetor Kit

4369-87122-11-18-7765
5369-87122-11-18-7765
25346-87122-019-3750118-7291
30346-87122-019-3750118-7291
35345-87122-01-18-7290(1)
40C345-87122-01-18-7290(1)
45A2346-87122-029-3750118-7291
50C346-87122-029-3750118-7291
60C346-87122-029-3750118-7291
70A2346-87122-029-3750118-7291
Notes:
(1) : Kit contains enough components to rebuild 2 carburetors
Refine Parts List
HP/Model

(4 to 70)
Carburetor Kit - Sierra
Your Price: $125.99
Save: $30.73
(19% Off $156.72)
Part # 18-7290 ValueShip™ Eligible
No Reviews | Write Review
Replaces OEM part #
  • MERCURY MARINE 84419M
  • NISSAN/TOHATSU 345-87122-0
  • YAMAHA 696-W0093-02-00
Kit contains enough components to rebuild 2 carburetors.
Carburetor Kit - Sierra
Your Price: $24.99
Save: $4.48
(15% Off $29.47)
Part # 18-7291 ValueShip™ Eligible
Replaces OEM part #
  • MERCURY MARINE 84475M
  • NISSAN/TOHATSU 346-87122-0
  • YAMAHA 6H1-W0093-01-00
(3) of 18-7291 = (1) of 6H1-W0093-01-00. This kit will rebuild one carburetor.
Carburetor Kit - Sierra
Your Price: $30.89
Save: $7.03
(18% Off $37.92)
Part # 18-7765 ValueShip™ Eligible
Replaces OEM part #
  • MERCURY MARINE 11502M
  • NISSAN/TOHATSU 369-87122-1
  • YAMAHA 6G1-W0093-00-00
Mallory Carb Kit 9-37501
Mallory Carb Kit 9-37501
Your Price: $22.99 Discontinued
Save: $6.48
(21% Off $29.47)
Part # 9-37501 ValueShip™ Eligible
Replaces Original Equipment Manufacturer(OEM):Yamaha
Replaces Original Equipment Manufacturer # (OEM #):6H1-W0093-01
Fits Application:75-90

Includes parts to repair 3 carburetors.

Nissan / Yamaha 25-85 Hp Carburetor Kit With Float
Nissan / Yamaha 25-85 Hp Carburetor Kit With Float
Your Price: $16.29 (Out of stock)
Part # 600-50
No Reviews | Write Review
    Nissan / Tohatsu 346-87122-0
    Yamaha:
  • 6H1-W0093-00
  • 6H1-W0093-01
Sierra
Average Customer Review for Carburetor Kit - Sierra
Based On 3 Reviews | Write Review
Fast shipping and good kit
by Conrad from Baton Rouge, Louisiana on April 07, 2013
The kit seems to be pretty good. It is important to note that the included float does not fit in my M30A2 carb, I had to use the old float.
Was this review helpful?
complete carb kit
by Brad from Kaneohe, Hawaii on November 02, 2012
product works great on an older 1992 25C2 outboard.
Was this review helpful?
did not fit perfectly
by Raul from East Sandwich, Massachusetts on June 06, 2011
The floats did not fit, would not move freely. Had to re-use the old valveseats because did not seal properly and had to dissasemble the carbs again and I'm not sure if the orings are ethanol resistant, thy seam to swell up when in contact with fuel
(5 of 7 people found this review helpful)
Was this review helpful?
Average Customer Review for Carburetor Kit - Sierra
Based On 4 Reviews | Write Review
incorrect part
by Bob from Whitehouse, Tennessee on August 04, 2012
received wrong part, contacted i-boats, tech person did some checking then said she would have to call me back, which never happened, took a long time to get return ins tructions, the way these instructions are written makes a person feel that they only have a 50/50 chance of getting credit.
Was this review helpful?
carburator
by Larry from Belfast, Maine on August 11, 2011
products were just what I expected. Thanks
(1 of 1 people found this review helpful)
Was this review helpful?
dont take the word of other parts stores
by Timothy from Rochester, New York on July 20, 2011
Unfortunately it was not the right kit exactly but my marina was able to adjust it to work
Was this review helpful?
no gasket
by Charles from Gig Harbor, Washington on July 17, 2011
Be aware this kit does NOT come with a new gasket for re-attaching the carb to the engine.
(1 of 1 people found this review helpful)
Was this review helpful?
Average Customer Review for Mallory Carb Kit 9-37501
Based On 5 Reviews | Write Review
You get what you pay for...
by Wendy from New Ellenton, South Carolina on August 19, 2014
This product is just plain junk. The o'ring type gaskets did not fit. The float valve were too short and could not seat seat causing the carbs to flood. The floats themselves would not fit. The jets were longer than the originals although you could get them to work. So in short, this kit is the price of one good kit, but you cannot make one good kit from all of it.
Was this review helpful?
does not fit
by Murray from Hartford, Kentucky on July 29, 2014
this kit does not fit this carb.
Was this review helpful?
Mismatch of Parts
by Richard from Dallas, Texas on August 13, 2013
Most of the pieces on this carb fit do not fit and using only a few of the pieces does not work well as you have to adjust the other pieces. I was able to use the float but it's matched to the float bowls which don't fit. I had to modify my existing float bowls. So basically I used 3 parts of this entire kit. DO NOT ORDER THIS UNLESS YOU PLAN AND THROWING AWAY OVER HALF THE PIECES (AND HOPE THE ONES YOU ARE THROWING AWAY ARE THE ONES YOU DIDN'T NEED)!!! I already had the carbs removed so I used what I could to get the engine running again.
Was this review helpful?
parts do not fit.
by Peter from Cape Coral, Florida on April 12, 2012
The float bowls are not the right shape and the gaskits are not the right and do not match up. I need to return these kits. Thanks, Pete
(1 of 4 people found this review helpful)
Was this review helpful?
Won't on yamaha C85 or any carb from what I can Tell
by Alan from Albany, Georgia on April 03, 2011
Just to look at it,It looks like all the correct parts for a Yamaha C85 Carb. The First thing was the float height was a little low in the closed position and did not drop low enough in the open position. Tried using the old float and it was now worse.(That should have a red flag) I modified (sanded)the stops on the back of the new float so it would open properly and ignored the slight difference in the closed height. Assembled and All the carbs flooded! I couldn't believe the slight difference in the float height(1/64in) allowed this to happen. Took it back apart and looked real close to find the needle valve keeper/spring was touching the needle valve seat preventing from closing all the way. So I say this would not work on any carb. It appears the hole in the valve seat is too low or drilled out too far or the wrong one all together.
(1 of 3 people found this review helpful)
Was this review helpful?
Ask a question for
This product ships in 1 to 3 business days.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
Dollar after dollar of sitewide savings!
Dollar Days Sale!