Keep Summer Going Strong with our August Sale Savings up to 50% OFF!

OMC Push-To-Choke Ignition Starter Switch SeaDog Line

Seadog Line
OMC Push-To-Choke Ignition Starter Switch SeaDog Line
Your Price: $15.18
Save: $6.82
(31% Off $22.00)
Part # 420382-1 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 19 hrs 12 mins.
This item is found in the following Product Families
Omc Push-To-Choke Ignition Starter Switch
Omc Push-To-Choke Ignition Starter Switch
Quick start your boat with a turn of the Sea-Dog OMC Push-To-Choke Ignition Starter Switch. It is made of polypropylene to offer durable use.  …

Three Position Ignition Switch - Magneto Style

Accommodates maximum panel thickness to 5/8".
Replaces OMC No. 393301.
6-Boss/Screw terminal base, sealed polyester housing.
Brass back-up nut, black plastic hex face nut.
Diagram: A=13/16"
Full StarFull StarFull StarFull StarHalf Star Based On 15 Reviews | Write Review
Full StarFull StarFull StarFull StarFull StarGood Fit for an Older Pontoon
by Viki from New Richmond, Wisconsin on June 29, 2015
The ignition starter switch fit perfectly. We were worried as the motor and pontoon are pretty old. (1980's) My husband did get a little help from a friend who is an electrician to make sure it was hooked up right. Ran like a charm!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarWorked good
by Adam from Lima, Ohio on June 26, 2015
Looks and fits like the original. Thanks
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarIt works like it should
by Joseph from College Station, Texas on August 22, 2014
Not an exact replacement but it works like it should. Terminals are a little different in 2 locations. If you know your wiring and with the help of an ohm meter or continuity tester it is not hard to put together.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarBest buy for the money
by Cliff from Waxahachie, Texas on July 28, 2014
Needed new ignition starter switch for my 1996 ranger. Only place I found one for a good price. Received it very quick and had it installed in about 20 mins. Very good buy. I will buy my boating accessories and anything for my boat here everytime.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarIgnition switch
by Roger from Ashland, Kentucky on July 03, 2014
I have installed it and so far seems to be working properly.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarIgnition switch
by Steve from Glenpool, Oklahoma on June 18, 2014
Very satisfied with the assistance and prompt service. Representative was very helpfull. I would recommend them to anyone. Steven C. Butler.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starseadog
by Chuck from Mertztown, Pennsylvania on January 05, 2014
switch worked perfect!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Stargood switch
by Robert from Glasgow, Kentucky on July 22, 2013
This switch works great and was easy to install on my 1996 Lowe fish and ski.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarIgnition switch with choke.
by Kansith from Graham, North Carolina on July 13, 2013
Product as described.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starkey switch
by Randy from Tuckerman, Arkansas on June 26, 2013
works fine
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarAwesome
by David from Trussville, Alabama on April 28, 2013
Direct replacement and works perfect... Now back to FISHING!!!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Starignition switch
by Coy from Wooster, Arkansas on May 28, 2012
hassle free install runs great.
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty StarAre you sure??
by Brian from Belleville, Illinois on July 27, 2011
If you need a switch to fit into the control box of your omc product, this one will work, barely.You will have to cut off the existing wire ends and install ring type connectors. Also, this one is not the safety lanyard type.Made in China.
(4 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarSea Dog start Swtich
by Anthony from Conyers, Georgia on July 10, 2011
Excellent replacement part. Easy to install and was an exact fit.
(2 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarSeaDog OMC Push to Start Ign Switch
by Dan from Lakewood, Colorado on July 02, 2011
Overall the switch is a direct replacement for the stock OMC switch. One exception is the contact layout for the wire terminals. Using the instruction sheet and a ohm meter I was able to determine the correct termination. Without a ohm meter and relying on just the instruction sheet would have been hit or miss. Took about 1/2 hour to install. Have used for three days since install on a Walleye boat rough water, rain and have had no problems with starting or choke activation.
(28 of 28 people found this review helpful)
Was this review helpful?
Q:
What is the threaded shaft size? #420382-1?
A:
The threaded shaft size, according to our files, is 13/16".
Q:
Would this switch be compatible with 1997 johnson 200hp oceanpro?
A:
This cross references with 393301 OEM number. You will have to verify that in order to match it up.
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
Save More Now and Keep the Summer of Boating Fun Going Strong!