Panther Auxiliary Motor Brackets For 4-Stroke Motors

Aluminum Outboard Motor Bracket up to 10HP- Panther
Your Price: $99.99 (Out of stock)
Save: $70.00
(41% Off $169.99)
Part # I-2210
Lightweight Aluminum Outboard Motor Bracket up to 15hp - Panther
Your Price: $241.65
Save: $42.64
(14% Off $284.29)
Part # 55-0407AL
SHIPS TODAY!* if ordered in 3 hrs 51 mins.
No Reviews | Write Review
Lightweight Stainless Steel Outboard Motor Bracket up to 15hp - Panther
Your Price: $272.93
Save: $48.16
(14% Off $321.09)
Part # 55-0408SS
SHIPS TODAY!* if ordered in 3 hrs 51 mins.
No Reviews | Write Review
Aluminum Outboard Motor Bracket up to 35hp - Panther
Your Price: $354.82
Save: $67.47
(15% Off $422.29)
Part # 55-0416
SHIPS TODAY!* if ordered in 3 hrs 51 mins.
Auxiliary Motor Lift - Panther
Your Price: $1357.35 (Out of stock)
Part # 55-0045
No Reviews | Write Review
Replacement Motor Plate, fits 55-0416 - Panther
Your Price: $67.17
Save: $12.82
(16% Off $79.99)
Part # 99-55653
SHIPS TODAY!* if ordered in 3 hrs 51 mins.
Hurry! Only 1 left in stock
No Reviews | Write Review
Adjustable Motor Bracket, 4-Stroke up to 35hp - Panther
Your Price: $254.99
Save: $45.00
(15% Off $299.99)
Part # 55-0410
SHIPS TODAY!* if ordered in 3 hrs 51 mins.
Hurry! Only 1 left in stock
No Reviews | Write Review
Panther
Outboard motor brackets, plates, and lifts. Stainless and Aluminum.
Aluminum Outboard Motor Bracket up to 10HP- Panther
CLEARANCE SALE
CLEARANCE SALE - WHILE SUPPLIES LAST

The adjustable outboard motor bracket is designed for motors up to 10HP or 82 lbs max weight. Light weight clear aluminum construction is designed for fresh water use on both power boats and sail boats. Manual operation. 12" of travel with 5 stops for multiple running positions. Mounting hardware is included.

Lightweight Aluminum Outboard Motor Bracket up to 15hp - Panther
Lightweight Aluminum Outboard Motor Bracket up to 15hp - Panther
Adjustable aluminum outboard motor bracket works with 4-stroke motors up to 15hp, max weight of 132lbs. This black, hard-coat anodized aluminum bracket is built to handle the increased torque output of today's four stroke engines. Twist-knob Safety Locks provide increased torque rating while helping secure bracket in place. Motor's weight is counterbalanced by heavy-duty stainless steel torsion springs for easy lifting. The 55-0407AL boasts a 2"-thick, extra-wide, weatherproof and maintenance-free polypropylene mounting board along with aircraft-type stainless steel hardware. Four-position lock bar and 10" of travel allows for better range of trim adjustment letting you fine tune motor height for optimal performance. Rated for long or short shaft engines.

  • Overall size: 8.5" wide x 21" high
  • Setback: 8"
  • Motor mount pad size: 11.5 " wide x 10.75" high
  • Weight: Approx. 20 lbs
  • Lightweight Stainless Steel Outboard Motor Bracket up to 15hp - Panther
    Lightweight Stainless Steel Outboard Motor Bracket up to 15hp - Panther
    Adjustable Stainless Steel outboard motor bracket. Works with 4-Stroke motors up to 15hp, max weight 132lbs. Twist-knob Safety Locks provide increased torque rating while helping secure bracket in place. Built extra-tough and extra-wide for secondary, higher-torque, four-stroke engines. Motor's weight is counterbalanced by heavy-duty stainless steel torsion springs for easy lifting. The 55-0408SS boasts a 2" thick, weatherproof and maintenance-free polypropylene mounting board along with aircraft-type stainless steel hardware. Four-position lock bar and 10" of travel allows for better range of trim adjustment letting you fine tune motor height for optimal performance. Rated for long or short shaft engines.

  • Overall size: 7.25" wide x 21.5" high
  • Setback: 7.25"
  • Motor mount pad size: 11.5 " wide x 10.75" high
  • Weight: Approx. 21 lbs
  • Aluminum Outboard Motor Bracket up to 35hp - Panther
    Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions. The anodized aluminum bracket is built to handle the increased weight and torque output of today's four strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight making adjustments a breeze -- while the 2"-thick, extra-wide mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance.

  • Overall size: 8.50" wide x 21" high
  • Setback: 8"
  • Motor mount pad size: 11.5 " wide x 10.75" high
  • Weight: Approx. 20 lbs
  • Auxiliary Motor Lift - Panther
    This Auxiliary Motor Lift has up to 40hp four stroke motors and up to 15.5" vertical lift. With a fabricated aluminum plate and powder coat paint, it has stainless steel hardware and is electro/hydraulic. It includes all wiring (25 feet), relays and switches, and works with option wireless control 55-0105.
    Replacement Motor Plate, fits 55-0416 - Panther
    Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions. The anodized aluminum bracket is built to handle the increased weight and torque output of today's four strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight making adjustments a breeze -- while the 2"-thick, extra-wide mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Handles up to 35hp, 263 lb. motor, with 16" of travel. Spring assists.
    Adjustable Motor Bracket, 4-Stroke up to 35hp - Panther

    Adjust your trolling or auxiliary motor to five vertical running positions for changing water or load conditions. The anodized aluminum bracket is built to handle the increased weight and torque output of today's four strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight making adjustments a breeze. The 2" thick, extra-wide mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance.

    Based On 3 Reviews
    Motor Bracket - Excellent Value by Patrick - Lasalle, QuebecJune 13, 2013
    The motor bracket is made of solid aluminum, engineered with a good mechanism, designed to be functional and durable. Great value for the price. Purchase in full confidence that what you're going to get is actually more than what you see...!
    (3 of 5 people found this review helpful)
    Was this review helpful?
    Great product by Robert - Grand Bay, AlabamaApril 05, 2013
    I recieved my bracket within 4 days of ordering it, mounted it on my boat and used it the next day. My kicker motor (2.5hp - 4 stroke) works perfectly on it. Had no problems with the installation, now I have complete confidence when I go fishing that I will return home safely. Thanks for your promptness. Bobby S.
    (2 of 3 people found this review helpful)
    Was this review helpful?
    "Spring Loaded' Motor Bracket??? by Dieter - Bellefonte, PennsylvaniaJuly 18, 2013
    The Iboats Web site advertised the I-2210 part at the time I ordered that the part I-2210 Motor Bracket was "spring loaded" and the springs were clearly shown in the photo of the part included in your Web site. The Item I received did not have those springs as advertised. Even today the photo still shows two springs also the words "spring loaded" have been deleted on your Web site after I complained about the misleading Web site to Iboats! I was very disappointed!
    (1 of 1 people found this review helpful)
    Was this review helpful?
    Based On 2 Reviews
    Nice but Panther is useless by Luke - Bay City, MichiganApril 05, 2012
    I purchased on of these brackets, The bracket was wobbly and all the bolts were loose. Also the handle for lifting was too short to make the nut with the Nylon to prevent loosening on its own. I contacted Panther Marine by phone and E-mail and as follows is the messages I received. They told me to unmount the bracket from my boat and mail it in, and would not ship me the correct bolt length. I ended up picking it up from a fastener wholesaler for $4.00. But the bracket is still on poor fabrication for $400.00. and NOT Made in the US *************************************Panthers Response VIA E-mail ******************************8 Luke, we do not have any replacement parts for these units yet, they are on order but it probably will be January before we get them. Here is what you could do, if you choose to: The bolt size is 3/8” by 5-3/4”, you may want to get a 6” bolt. OR you could cut the handle portion that is between the two sides, cut off about ¼” and then you could get the existing bolt to grab the nut. This is the best we could do for you. The only other option is. WE WILL REPLACE THE WHOLE BRACKET TO YOU, BUT YOU NEED TO SEND US THE OTHER UNIT FIRST. I think you said it was already mounted and maybe hard to un-mount. Let me know if you want to return the bracket to us. If you do, we will send a call tag to pickup the existing bracket and send you a new bracket in return. We need a copy of your purchase receipt from where you bought the unit Thank you for your e-mail Dale Hagen Marinetech Products dhagen@marinetech.info Panther, Navigator, Detwiler, Angler’s Pal, EZ-Steer, TrollMaster Safe-Skeg. 1760 Buerkle Circle White Bear Lake, MN 55110 Log on to our website www.marinetechproducts.com http://www.youtube.com/marinetechproducts Videos of many products Click on desired product line Download our catalog on the website Call us if you need help or to place an order: TEL: 651-486-2010 FAX: 651-486-6989 Description: cid:image001.jpg@01CB9869.A7815490 From: Luke Sent: Wednesday, October 26, 2011 11:09 AM To: Info@ Subject: Bracket problem Luke 10/31/11 to info, larry.grundtner, Dale Thanks Dale, However your company's lack of help in not appreciated. Well the bolt packaged with this brand new mount I purchased was only 5 1/2 inches long. Obviously 1/4" shorter than whats required. What kind of company is MarineTech? I have never been so disappointed in a product after spending slightly less than 1/2 thousand dollars, yes almost $500.00 on a mount and you are giving me a problem with a $4.00 bolt. I polity informed you of the sub-par assembly of an expensive mount when speaking with you on the phone, and hopefully your relayed the information to your quality control department. You can count on me posting numerous posts on what I think of your products on various forums including me having to tighten almost every bolt that the unit came with as nothing was square and uniform, and dont like wobbly or excessive amount of play in a mount, as it will eventually lead to metal fatigue. I feel sorry for other buyers of your products, as I very highly doubt they are as mechanically inclined as I, and probably dont have access to industrial fastener suppliers as I do. Also, Who in their right mind would take no less than 1 hour to un-mount a brand new kicker bracket just to get a proper sized bolt, box it up and ship it to you? I sent you a picture and you can clearly see there is a manufactures spec issue with your bracket.
    (9 of 9 people found this review helpful)
    Was this review helpful?
    Nice but Panther is useless by Luke - Bay City, MichiganApril 05, 2012
    I purchased on of these brackets, The bracket was wobbly and all the bolts were loose. Also the handle for lifting was too short to make the nut with the Nylon to prevent loosening on its own. I contacted Panther Marine by phone and E-mail and as follows is the messages I received. They told me to unmount the bracket from my boat and mail it in, and would not ship me the correct bolt length. I ended up picking it up from a fastener wholesaler for $4.00. But the bracket is still on poor fabrication for $400.00. and NOT Made in the US Luke, we do not have any replacement parts for these units yet, they are on order but it probably will be January before we get them. Here is what you could do, if you choose to: The bolt size is 3/8” by 5-3/4”, you may want to get a 6” bolt. OR you could cut the handle portion that is between the two sides, cut off about ¼” and then you could get the existing bolt to grab the nut. This is the best we could do for you. The only other option is. WE WILL REPLACE THE WHOLE BRACKET TO YOU, BUT YOU NEED TO SEND US THE OTHER UNIT FIRST. I think you said it was already mounted and maybe hard to un-mount. Let me know if you want to return the bracket to us. If you do, we will send a call tag to pickup the existing bracket and send you a new bracket in return. We need a copy of your purchase receipt from where you bought the unit Thank you for your e-mail Dale Hagen Marinetech Products dhagen@marinetech.info Panther, Navigator, Detwiler, Angler’s Pal, EZ-Steer, TrollMaster Safe-Skeg. 1760 Buerkle Circle White Bear Lake, MN 55110 Log on to our website www.marinetechproducts.com http://www.youtube.com/marinetechproducts Videos of many products Click on desired product line Download our catalog on the website Call us if you need help or to place an order: TEL: 651-486-2010 FAX: 651-486-6989 Description: cid:image001.jpg@01CB9869.A7815490 From: Luke Sent: Wednesday, October 26, 2011 11:09 AM To: Info@ Subject: Bracket problem Luke 10/31/11 to info, larry.grundtner, Dale Thanks Dale, However your company's lack of help in not appreciated. Well the bolt packaged with this brand new mount I purchased was only 5 1/2 inches long. Obviously 1/4" shorter than whats required. What kind of company is MarineTech? I have never been so disappointed in a product after spending slightly less than 1/2 thousand dollars, yes almost $500.00 on a mount and you are giving me a problem with a $4.00 bolt. I polity informed you of the sub-par assembly of an expensive mount when speaking with you on the phone, and hopefully your relayed the information to your quality control department. You can count on me posting numerous posts on what I think of your products on various forums including me having to tighten almost every bolt that the unit came with as nothing was square and uniform, and dont like wobbly or excessive amount of play in a mount, as it will eventually lead to metal fatigue. I feel sorry for other buyers of your products, as I very highly doubt they are as mechanically inclined as I, and probably dont have access to industrial fastener suppliers as I do. Also, Who in their right mind would take no less than 1 hour to un-mount a brand new kicker bracket just to get a proper sized bolt, box it up and ship it to you? I sent you a picture and you can clearly see there is a manufactures spec issue with your bracket.
    (6 of 7 people found this review helpful)
    Was this review helpful?
    This product ships in 1 business day.

    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    * Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies
    Great Boating Days are Ahead!
    Enjoy Extra Discounts 5-20% Off During the SPRING SAVINGS SALE!
    Great Boating Days are Ahead!
    Enjoy Extra Discounts 5-20% Off During the SPRING SAVINGS SALE!