These Paste Wood Filler Stains are used to fill and permanently stain porous, grainy wood.
The wood should be completely bare, and any black water stains bleached out. The darker the
Paste Wood Filler Stain, the more even the final appearance will be on varicolored woods. The
fillers can be intermixed and shaded with color in oil or universal colorants to achieve custom
colors.
COVERAGE: 200 square feet per gallon.
DRY TO RECOAT: Overnight.
APPLICATION TEMPERATURE: 50° or higher.
THINNER: Pettit 120 Brushing Thinner
SYSTEMS
Mix the filler at a ratio of two volumes filler to one volume of Pettit 120 Brushing Thinner.
Apply to wood by brushing into the wood grain. When the filler mixture begins to dull off
(approximately five minutes), rub off the excess in a circular motion with a burlap or cloth
pad. Do not change the pad in this operation. As the pad fills with excess filler, the filler is
forced into the grain. When the excess filler has been removed in this operation, wipe the
wood with a clean rag in a circular motion to completely remove any residual filler on the
surface. Try not to wipe in the same direction as the grain because this action will tend to
strip the filler out of the grain. This wiping pad surface should be changed frequently to
quickly absorb the excess filler.
On very rough, porous wood, a wash coat of sealer can be applied before filling. Reduce one
volume of 2018 Clear Sealer with four volumes of 120 Brushing Thinner. Brush on and let dry
overnight. Then apply the Paste Wood Filler.
Disclaimer: Charts apply to Interlux products only. The information provided is not
intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot
take responsibility for any actions as a result.
The performance of marine paint depends on many factors outside the control of iboats.com, including surface
preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this
product’s suitability for your particular purpose or application.
By purchase or use of this product,
buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or
replacement of the product at iboats.com’s option.
 |
Paste Wood Filler Stain, Dark Mahogany - Pettit (Kop Coat)
Part # 7665P
These Paste Wood Filler Stains are used to fill and permanently stain porous, grainy wood.
The wood should be completely bare, and any black water stains bleached out. The darker the
Paste Wood Filler Stain, the more even the final appearance will be on varicolored woods. The
fillers can be intermixed and shaded with color in oil or universal colorants to achieve custom
colors.
COVERAGE: 200 square feet per gallon.
DRY TO RECOAT: Overnight.
APPLICATION TEMPERATURE: 50° or higher.
THINNER: Pettit 120 Brushing Thinner
SYSTEMS
Mix the filler at a ratio of two volumes filler to one volume of Pettit 120 Brushing Thinner.
Apply to wood by brushing into the wood grain. When the filler mixture begins to dull off
(approximately five minutes), rub off the excess in a circular motion with a burlap or cloth
pad. Do not change the pad in this operation. As the pad fills with excess filler, the filler is
forced into the grain. When the excess filler has been removed in this operation, wipe the
wood with a clean rag in a circular motion to completely remove any residual filler on the
surface. Try not to wipe in the same direction as the grain because this action will tend to
strip the filler out of the grain. This wiping pad surface should be changed frequently to
quickly absorb the excess filler.
On very rough, porous wood, a wash coat of sealer can be applied before filling. Reduce one
volume of 2018 Clear Sealer with four volumes of 120 Brushing Thinner. Brush on and let dry
overnight. Then apply the Paste Wood Filler.
Disclaimer: Charts apply to Interlux products only. The information provided is not
intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot
take responsibility for any actions as a result.
The performance of marine paint depends on many factors outside the control of iboats.com, including surface
preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this
product’s suitability for your particular purpose or application. By purchase or use of this product,
buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or
replacement of the product at iboats.com’s option.
|
This product ships in 1 business day.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
Standard Shipping Policies
