Polypoxy 97 Epoxy Thinner, Quart - Pettit (Kop Coat)

97 EPOXY THINNER
A strong, fairly fast evaporating thinner that allows the polypoxy to flow out smoothly and yet flashes out fast enough to prevent sags.

Pettit 97 Epoxy Thinner is a strong, fairly fast-evaporating thinner that allows two-part epoxies to flow out smoothly and yet flashes off fast enough to prevent sags.

RECOMMENDED USE:
Add about 10% Epoxy Thinner to Epoxy Primers when necessary.

NOTE:
Pettit manufactures a wide array of thinners to compliment our various coating products. The Thinners are matched to the product, method of application and atmospheric conditions present at the time of application. When application temperatures are high (80°F and above) slow thinners are recommended to improve brushability and flow of the product. Generally, faster evaporating thinners are utilized for spray work to maximize atomization while mini mizing the chances for runs and sags. Faster evaporting thinners are also useful for brush and roller work at lower temperatures (60°F and below) since there is less chance of these thinners becoming trapped under the drying paint film causing blistering at a later date.

Never overthin a varnish, enamel, undercoat, primer or other paint product. Doing so could lead to reduced gloss upon drying or a reduction in the performance of a product. Always follow the thinning instructions given on the label or technical data sheet for the specific product being applied.

Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.

By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com’s option.