Port-side Trolling Motor Mount Upgrade - Shoretex Fabric

Port-side Trolling Motor Mount Upgrade - Shoretex Fabric
Your Price: $25.00
Save: $10.00
(28% Off $35.00)
Part # PORT-TROLL-UPGRADE ValueShip™ Eligible
Shoretex Fabric

Product Families

ShoreMaster Boat Cover Upgrades
    Trolling Motors: If the trolling motor has a detach plate, it is best to remove the trolling motor when using the cover. In which case the cover can …
    Based On 18 Reviews | Write Review
    Trolling motor reinforcement
    by Anthony from Middleburg Hts, Ohio on October 16, 2014
    Was this review helpful?
    by Ricky from Kankakee, Illinois on September 15, 2014
    Good coverage for the t-motor
    Was this review helpful?
    Boat Cover
    by Christopher from Gardiner, Maine on September 11, 2014
    Cover seems to be made with quality material however I am unsure how long it will last as certain pressure points may ruin the cover like where the seats are. As of right now, no complaints.
    Was this review helpful?
    Port-side Trolling Motor Mount Upgrade - ShoreMaster
    by Donald from Cottage Grove, Minnesota on September 04, 2014
    Im so happy with upgrade a MUST HAVE cover fits my boat PERFECTLY
    Was this review helpful?
    No real happy
    by William from Allouez, Michigan on August 01, 2014
    I ordered online after speaking to customer service about the boat cover. When the cover arrived I find it was not designed to accommodate the windshield. After checking with customer service I was told that they did not have a "custom" cover for my boat, so I got a best fit model. I went back online and according the website they definitely list a "custom" cover for my boat model. The cover I have is ok but fits sloppy.
    Was this review helpful?
    Port Side Trolling Motor Upgrade
    by Clifford from Dadeville, Alabama on July 10, 2014
    The trolling motor upgrade is essential for a good fit. Is definitely worth the price.
    Was this review helpful?
    Little Uneasy but Satisified
    by Jonathan from Shakopee, Minnesota on July 08, 2014
    I was a little uneasy ordering the extra trolling motor upgrade, since it was non-returnable if I didn't like it, but it's great. I can't fathom the idea of taking the motor off the rail each time I need to cover my boat. It has all the extra material in the right place where you need it and it fits perfect. I put this on my 2000 Crestliner fish hawk and its great. Don't hesitate like I did. A+++
    Was this review helpful?
    Needed upgrade
    by Francis from Birmingham, Alabama on July 07, 2014
    The portside trolling motor upgrade really helped to give my boat cover a tight fit. It was a needed upgrade and I am happy I made the purchase.
    Was this review helpful?
    cover upgrade
    by Thomas from Berwick, Maine on June 13, 2014
    Done well!
    Was this review helpful?
    Doesn't fit our trolling motor well
    by Jeffery from Cedar Rapids, Iowa on June 01, 2014
    We have a Minn Kota Terrova trolling motor, which is not an unusual size or anything, but the pocket in this cover doesn't fit it at all. I expected a little more structured pocket in the cover, but it appears that just left a little extra fabric in the port side of the cover and randomly sewed in an extra layer of fabric in two spots. Unfortunately, the two spots where they added the extra fabric doesn't match either the head or prop on my trolling motor, so we had to pad them ourselves with foam rubber.
    Was this review helpful?
    boat cover
    by George from Raymond, New Hampshire on May 27, 2014
    My last Shoremaster boat cover purchased 6 years ago had the outboard motor hood sewn directly to the boat cover. It was part of the boat cover. This hood was completely separate. Nothing on your website nor ShorMaster's website stated that it was unattached. I expected it to be part of the boat cover and it was not. Also the reinforcement area for the front cleats are not in the correct position. They do not reinforce the cover at the cleats or gas filler.
    Was this review helpful?
    Lund 16' boat cover
    by a Customer from Pinckney, Michigan on July 08, 2013
    The cover I received was made for a 17' boat, and not a 16' boat. The model name for my boat clearly defines a 16' boat, "Lund Rebel 16 SS Adventure". The boat registration also states 16'. I paid $37.50 for return shipping, for their mistake.
    Was this review helpful?
    poor fit
    by Gary from North Richland Hills, Texas on June 29, 2013
    Not nearly enough room allowance for my trolling motor. Made to bow fit too short. They also shorted me 2 tiedown straps. I had to run all over town to find the appropriate tiedown straps. Definitely look to another source for a mooring cover. The fit was only slightly better than a universal fit cover that can be purchased for significantly less money
    Was this review helpful?
    very sloppy fit
    by Ronald from Sunnyvale, Texas on June 28, 2013
    This is far from fitting my trolling motor. There is no extra padding to keep motor from tearing thru in stress points.not at all custom. Seams on cover are sloppy and not straight in the middle of the boat. Far from a custom cover that it is supposed to be
    Was this review helpful?
    Boat Cover
    by William from Warren, Michigan on April 29, 2013
    This seems to be a quality boat cover. It has a VERY tight fit. I'm still stretching it, after a couple weeks, to get the last corner just right.
    Was this review helpful?
    Cover for tracker tv18
    by Robert from Coppell, Texas on January 20, 2013
    This is my 2nd cover. The fit is excellent. I added the vent and pole. Breathes and sheds the rain great. Will see how it performs during the Texas summer.
    Was this review helpful?
    ShoreMaster Cover with upgrade
    by Walter from Springfield, Pennsylvania on December 26, 2012
    Great cover that was easy to install. Fit my boat nicely and was very light.
    Was this review helpful?
    Review for Port-side Trolling Motor Mount Upgrade - ShoreMaster
    by a Customer on July 27, 2009
    (1 of 6 people found this review helpful)
    Was this review helpful?
    Ask a question for
    Question & Answer Guidelines
    This product ships in 6 business days.

    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    * Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies

    Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

    Custom Boat Covers

    Custom boat covers (including Odd-Lots, Liquidations, Closeouts, and In-Stock Specials) are non-returnable unless an error was made by iboats.com or by the boat cover manufacturer. If an error was made by iboats.com or the boat cover manufacturer, the cover must be returned in clean and resalable condition otherwise the return will be denied.

    Please make sure you select the correct make, model, year or style and length of your boat before ordering. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends.

    Please note that each boat cover manufacturer may have additional requirements concerning product returns or warranty claims, including but not limited to: restocking fees, shipping fees, or product order change fees.

    Because boat covers are "made-to-order", there will be a $25-$50 fee for any boat cover order cancellation after 1 business day of purchase, as the cover has already gone into production.

    Warranty Policy

    30 days after the purchase date, the manufacturer of the product(s) will need to be contacted for a warranty claim.

    Returns for Canadian Customers

    Canadian customers, please be careful when placing your order; iboats.com does not accept any return merchandise on Canadian orders unless the merchandise you received was defective, damaged, or an error was made by iboats.com. In such cases, please contact iboats.com Customer Service within 30 days of the original shipping date for a return authorization number. Returned items that do not have a RA # will not be accepted.

    See our complete return policy.