Powerhouse Ice Eater

Powerhouse 1/2HP Ice Eater
Your Price: $582.95 (Out of stock)
Part # P500-25-115V
No Reviews | Write Review
Powerhouse 3/4HP Ice Eater
Your Price: $580.25 (Out of stock)
Part # P750-25-115V
No Reviews | Write Review
Powerhouse 1HP Ice Eater
Your Price: $635.05
Part # P1000-25-115V
Hurry! Only 1 left in stock
No Reviews | Write Review
Powerhouse 1HP Ice Eater 230V
Your Price: $635.05
Part # P1000-25-230V
Hurry! Only 1 left in stock
No Reviews | Write Review
Powerhouse 3/4HP Ice Eater (100' Power Cord)
Your Price: $598.85
Save: $29.15
(4% Off $628.00)
Part # P750-100-115V
No Reviews | Write Review
Powerhouse 1/4HP Ice Eater - 115V with 25' Cord
Your Price: $544.15 (Out of stock)
Part # P250-25-115V
No Reviews | Write Review
PowerHouse Ice Eater 1 HP 115V w/100' Cord
Your Price: $645.95
Save: $36.05
(5% Off $682.00)
Part # P1000-100-115V
Hurry! Only 1 left in stock
No Reviews | Write Review
PowerHouse Ice Eater 1HP 230V w/100'Cord
Your Price: $645.95
Save: $36.05
(5% Off $682.00)
Part # P1000-100-230V
No Reviews | Write Review
ICE EATER 1 HP 115V 25FT CORD - The Power House
Your Price: $818.31
Save: $150.68
(15% Off $968.99)
Part # P1000
No Reviews | Write Review
1/2 HP 115V 25FTCORD ICE EATER - The Power House
Your Price: $695.46
Save: $122.73
(15% Off $818.19)
Part # P500
No Reviews | Write Review
Powerhouse 150' Replacement Power Cord
Your Price: $196.55
Part # 12150
Hurry! Only 1 left in stock
No Reviews | Write Review
Hurry! Only 1 left in stock
No Reviews | Write Review
Powerhouse 220V Thermostat w/Adjustable Temp Range
Your Price: $73.35
Save: $6.64
(8% Off $79.99)
Part # KP16220
No Reviews | Write Review
Powerhouse 3/4HP Ice Eater 230V w/100' Cord
Your Price: $623.05
Part # P750-100-230V
Hurry! Only 1 left in stock
No Reviews | Write Review
Powerhouse 3/4HP Ice Eater 115V w/50' Cord
Your Price: $593.65
Part # P750-50-115V
Hurry! Only 1 left in stock
No Reviews | Write Review
Powerhouse 1HP Ice Eater w/200' Cord - 230V
Your Price: $764.75
Part # P1000-200-230V
Hurry! Only 1 left in stock
No Reviews | Write Review
Powerhouse 3/4HP Ice Eater w/200' Cord - 230V
Your Price: $711.25 (Out of stock)
Part # P750-200-230V
No Reviews | Write Review
Powerhouse 1HP Ice Eater w/50' Cord - 115V
Your Price: $649.75 (Out of stock)
Part # P1000-50-115V
No Reviews | Write Review
Powerhouse
The Ice Eater is designed to prevent ice from forming around boats, marinas, docks, and piers as well as effectively melting existing ice by breaking the surface with a continuous current of warmer bottom water.

Ice Eater's propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation.

Ice Eater will melt existing ice. Unlike other de-icing units, Ice Eater requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in.

Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Powerhouse 1/2HP Ice Eater
Powerhouse 1/2HP Ice Eater
  • 1/2 H.P. energy efficient high quality motor with 28 pounds thrust
  • 5.0 amps, 115 volt, one phase, 60/50 cycle
  • 25 foot quick change power cord
  • Two 25 foot x 3/8 hollow braided mooring lines with shackles
  • Dimensions of shipping box 12 5/8 x 12 5/8 x 12 3/4
  • Weight 36 pounds
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  • Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best three-year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
Powerhouse 3/4HP Ice Eater
Powerhouse 3/4HP Ice Eater
  • 3/4 H.P. energy efficient high quality motor with 36 pounds thrust
  • 4.7 amps, 115 volt, one phase, 60/50 cycle
  • 25 foot quick change power cord
  • Two 25 foot x 3/8 hollow braided mooring lines with shackles
  • Dimensions of shipping box 14 1/2 x 14 1/2 x 16 1/8
  • Weight 45 pounds
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  • Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best three-year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
Powerhouse 1HP Ice Eater
Powerhouse 1HP Ice Eater
  • 1 HP energy efficient high quality motor
  • 115 volt, 7.0 amps, one phase, 60/50 cycle
  • 25 foot quick change power cord
  • Two 25 foot x 3/8" hollow braided mooring lines with shackles
  • Dimensions of shipping box, 14 1/2 x 14 1/2 x 16 1/8"
  • Shipping weight 45 lbs
  • For large boats, marinas and heavier uses
  • Can be used in place of several smaller units
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance Propeller screws on shaft for easy removal and replacement
  • Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best three year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
Powerhouse 1HP Ice Eater 230V
Powerhouse 1HP Ice Eater 230V
  • 1 HP energy efficient high quality motor
  • 230 volt, 3.5 amps, one phase, 60/50 cycle
  • 25 foot quick change power cord
  • Two 25 foot x 3/8" hollow braided mooring lines with shackles
  • Dimensions of shipping box, 14 1/2 x 14 1/2 x 16 1/8"
  • Shipping weight 45 lbs
  • For large boats, marinas and heavier uses
  • Can be used in place of several smaller units
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance Propeller screws on shaft for easy removal and replacement
  • Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best three year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
  • Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application
Powerhouse 3/4HP Ice Eater (100' Power Cord)
Powerhouse 3/4HP Ice Eater (100' Power Cord)
  • 3/4 H.P. energy efficient high quality motor with 36 pounds thrust
  • 4.7 amps, 115 volt, one phase, 60/50 cycle
  • 100' power cord
  • Two 25 foot x 3/8 hollow braided mooring lines with shackles
  • Dimensions of shipping box 14 1/2 x 14 1/2 x 16 1/8
  • Weight 45 pounds
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
  • Motor shaft is 316 stainless steel, the best material for salt water application
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
  • Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
  • Stator motor windings have double impregnation of baked insulating varnish
  • Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
  • Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
  • Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
  • Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
  • Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
  • Performance certified tested at our facility for proper output and leaks before shipment
  • Best three-year limited warranty in the marketplace
  • Comes complete, just open the box, remove and install
  • Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application
Powerhouse 1/4HP Ice Eater - 115V with 25' Cord
HP: 1/4
Amps* 115V: 2.5
Open Diameter**: 20-25 ft.
Cord Length: 25 ft.

All units available in 230V, (halve the amps, i.e., 2.5 @ 115V = 1.25 @ 230V).
** 200 Ft. available in 230V only
*** Based on an average winter - extreme conditions will cause open diameter to become smaller.

When water freezes, it expands, becoming lighter. This fact is the principle upon which Ice Eater functions. Ice Eater circulates warmer bottom water to the top, thereby preventing ice formation. If surface ice already exists, the flow of warmer bottom water will effectively melt it. Ice Eater obtains its superior operating efficiency through the use of an axial flow, shrouded propeller design. This design also privdes protection for the rotating propellor.
PowerHouse Ice Eater 1 HP 115V w/100' Cord
Model P1000

Ice Eater P1000 - 1 HP propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

Ice Eater P1000, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Ice Eater P1000 Features:
  • Standard 100' quick change power cord.
  • Two 25 ft. x 3/8 in. hollow braided lines with shackles
  • Environmentally friendly lubricant
  • Patented Venturi Design for maximum thrust
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.


Specifications:
  • Horsepower: 1 HP
  • Power needed: 115V, 7.0amps, 1-phase, 50Hz
  • Typical Thrust: 42 lbs. thrust
  • De-Ices Diameter of: Approx. 80 ft.
  • Uses: De-icing large boats, marinas, or to replace several smaller units
PowerHouse Ice Eater 1HP 230V w/100'Cord
Model P1000

Ice Eater P1000 - 1 HP propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

Ice Eater P1000, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Ice Eater P1000 Features:
  • Standard 100' quick change power cord.
  • Two 25 ft. x 3/8 in. hollow braided lines with shackles
  • Environmentally friendly lubricant
  • Patented Venturi Design for maximum thrust
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.


Specifications:
  • Horsepower: 1 HP
  • Power needed: 230V, 3.5 amps, 1-phase, 60Hz
  • Typical Thrust: 42 lbs. thrust
  • De-Ices Diameter of: Approx. 80 ft.
  • Uses: De-icing large boats, marinas, or to replace several smaller units
ICE EATER 1 HP 115V 25FT CORD - The Power House
Designed to prevent ice formation around boats marinas floating docks piers pilings boat houses bulkheads and fish and duck ponds. The propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Will melt existing ice. Just cut a hole and lower the unit into place.
1/2 HP 115V 25FTCORD ICE EATER - The Power House
Designed to prevent ice formation around boats marinas floating docks piers pilings boat houses bulkheads and fish and duck ponds. The propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Will melt existing ice. Just cut a hole and lower the unit into place.
Powerhouse 150' Replacement Power Cord
150' Replacement Power cord for Ice Eater Units
Powerhouse 200' Replacement Power Cord f/230V Units Only
200' Replacement Power Cord for 230V Ice Eater Units Only
Powerhouse 220V Thermostat w/Adjustable Temp Range
ICE EATER THERMOSTAT - 220V

Adjustable Thermostat. Temperature range from 30°F to 110°F For use in both salt water and fresh water.
Powerhouse 3/4HP Ice Eater 230V w/100' Cord
Ice Eater P750 - 3/4 HP

Propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

Features:
Ice Eater P750, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

Ice Eater P750 Features
  • 3/4 HP energy-efficient high quality motor with 36lbs thrust
  • 230V, 2.35 amps, 1-phase, 50/60 Hz
  • Two 25' x ු hollow braided lines with shackles
  • Environmentally friendly lubricant
  • Patented Venturi Design for maximum thrust
  • Weight: 45lbs
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.


  • Specifications:
    • Horsepower: 3/4 HP
    • Power needed: 230V, 2.5 amps, 1-phase, 50/60 Hz
    • Typical Thrust: 36lbs thrust
    • De-Ices Diameter of: Approx. 60'
    • Uses: De-icing mid-sized boats and docks


    Powerhouse 3/4HP Ice Eater 115V w/50' Cord
    Ice Eater P750 - 3/4 HP

    Propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

    Features:
    Ice Eater P750, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

    Ice Eater P750 Features
  • 3/4 HP energy-efficient high quality motor with 36lbs thrust
  • 115V, 4.7amps, 1-phase, 50/60 Hz
  • Two 25' x 3/8 hollow braided lines with shackles
  • Environmentally friendly lubricant
  • Patented Venturi Design for maximum thrust
  • Weight: 45lbs
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.


  • Specifications:
    • Horsepower: 3/4 HP
    • Power needed: 115V, 4.7amps, 1-phase, 50/60 Hz
    • Typical Thrust: 36lbs thrust
    • De-Ices Diameter of: Approx. 60'
    • Uses: De-icing mid-sized boats and docks
    Powerhouse 1HP Ice Eater w/200' Cord - 230V
    Ice Eater P1000 - 1 HP

    Propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

    Ice Eater P1000, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

    Features:
  • 1 HP energy-efficient high quality motor with 42lbs thrust
  • 230V, 3.5 amps, 1-phase, 50/60 Hz
  • Environmentally friendly lubricant
  • Patented Venturi Design for maximum thrust
  • Weight: 44lbs
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.


  • Specifications:
    • Horsepower: 1 HP
    • Power needed: 230V, 3.5 amps, 1-phase, 50/60 Hz
    • Typical Thrust: 42lbs thrust
    • De-Ices Diameter of: Approx. 80'
    • Uses: De-icing mid-sized boats and docks
    Powerhouse 3/4HP Ice Eater w/200' Cord - 230V
    Ice Eater P750 - 3/4 HP

    Propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

    Ice Eater P750, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

    Features:
  • 3/4 HP energy-efficient high quality motor with 36lbs thrust
  • 230V, 2.35 amps, 1-phase, 50/60 Hz
  • Environmentally friendly lubricant
  • Patented Venturi Design for maximum thrust
  • Weight: 45lbs
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.


  • Specifications:
    • Horsepower: 3/4 HP
    • Power needed: 230V, 2.5 amps, 1-phase, 50/60 Hz
    • Typical Thrust: 36lbs thrust
    • De-Ices Diameter of: Approx. 60'
    • Uses: De-icing mid-sized boats and docks
    Powerhouse 1HP Ice Eater w/50' Cord - 115V
    Ice Eater P1000 - 1 HP

    Propeller draws up warmer subsurface water and deflects it to the surface creating a constant circulation of warmer water that prevents ice formation. Ice Eater will melt existing ice. 3-year limited warranty!

    Ice Eater P1000, unlike other de-icing units, requires no additional hardware in order to obtain the desired de-icing pattern. Ice Eater is shipped complete with suspension lines. It can be taken out of the box, hung in place and plugged in. Ice Eater may be hung from a pier or boat. Two to three feet is the average operating depth.

    Features:
  • 1 HP energy-efficient high quality motor with 42lbs thrust
  • 115V, 7.0 amps, 1-phase, 50/60 Hz
  • Environmentally friendly lubricant
  • Patented Venturi Design for maximum thrust
  • Weight: 44lbs
  • Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water. Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified. Motor shaft is 316 stainless steel, the best material for salt water application. Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application.


  • Specifications:
    • Horsepower: 1 HP
    • Power needed: 115V, 7.0 amps, 1-phase, 50/60 Hz
    • Typical Thrust: 42lbs thrust
    • De-Ices Diameter of: Approx. 80'
    • Uses: De-icing mid-sized boats and docks
    This product ships in 1 business day.

    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    * Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies

    Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

    Electronics/Software/Videos
    Electronics/Software/Videos are not returnable. Please be careful when ordering to choose the correct product.

    See our complete return policy.
    Great Boating Days are Ahead!
    Enjoy Extra Discounts 5-20% Off During the SPRING SAVINGS SALE!
    Great Boating Days are Ahead!
    Enjoy Extra Discounts 5-20% Off During the SPRING SAVINGS SALE!