Premium Yacht Enamel (Interlux)

Interlux Premium Yacht Enamel Topside Boat Finish, High Intensity Gloss, White, Gallon
Your Price: $67.05
Save: $42.44
(38% Off $109.49)
Part # 1G ValueShip™ Eligible
No Reviews | Write Review
Interlux Premium Yacht Enamel Topside Boat Finish, High Intensity Gloss, White, Quart
Your Price: $23.06
Save: $14.73
(38% Off $37.79)
Part # 1Q ValueShip™ Eligible
No Reviews | Write Review
Interlux Premium Yacht Enamel Topside Boat Finish, Hatteras Off White, Quart
Your Price: $23.06
Save: $14.73
(38% Off $37.79)
Part # 108Q ValueShip™ Eligible
No Reviews | Write Review
Interlux Premium Yacht Enamel Topside Boat Finish, Semi-Gloss White, Gallon
Your Price: $67.05
Save: $42.44
(38% Off $109.49)
Part # 220G ValueShip™ Eligible
No Reviews | Write Review
Interlux Premium Yacht Enamel Topside Boat Finish, Semi-Gloss White, Quart
Your Price: $23.06
Save: $14.73
(38% Off $37.79)
Part # 220Q ValueShip™ Eligible
No Reviews | Write Review
Yacht Enamel Gunmetal Gray-Ga. - Interlux
Your Price: $73.70 (Out of stock)
Save: $51.99
(41% Off $125.69)
Part # 232G ValueShip™ Eligible
No Reviews | Write Review
Flat White-Gallon - Interlux
Your Price: $68.98
Save: $19.61
(22% Off $88.59)
Part # 242G ValueShip™ Eligible
No Reviews | Write Review
Interlux
Features:
  • Traditional alkyd-based marine enamel
  • Bright, high gloss finish
  • Excellent flow and levelling properties
  • Superior hide, gloss and color retention

These high quality, topside alkyd-based enamels have been proven performers for over 40 years. Premium Yacht Enamels are superb for yacht applications including topsides, decks, fashion striping and boot tops.

They are easily applied straight from the can with brush or spray over properly prepared new or previously painted wood, metal or fiberglass surfaces. A tough finish is achieved that normally lasts 2-3 years prior to recoating. Application conditions are not as critical as the high performance coatings but the temperature should be above 50°F (10°C).

All paint colors shown here are for guidance only. Due to differences in screen displays that are beyond our control, the colors on these pages cannot be guaranteed to match the actual color in the can.

How much topsides
paint do I need?
Powerboat Sailboat
Waterline Length (feet) 20 25 30 35 40 20 25 30 35 40
2 part products (quarts) 2 3 4 5.5 6 2 3 4 5 6
1 part enamels (quarts) 3 4.5 6 8 9 2.5 4 5.5 7 8.5
1 part primers (quarts) 4 5.5 7.5 10 11 3 5 7 9 10.5

One-Part Paint Systems - Toplac®, Brightside®, Yacht Enamels This preparation scheme provides a good level of protection
Stage Product Fiberglass Aluminum Wood Steel Overcoating Time*
Clean Fiberglass Solvent Wash 202 or Special Thinner 216 202 216 216 216 20 min
Sand - 180-220 grit sandpaper sand blast or disc grind (coarse emery cloth) 80-180 grit
sandpaper
sand blast or disc grind (coarse emery cloth) -
Clean Fiberglass Solvent Wash 202 or Special Thinner 216 202 remove residue
(with broom or airline)
216 remove residue
(with broom or airline)
-
Surface Primer Viny-Lux Primewash 353/354 DO NOT USE 1 coat (thinned) DO NOT USE 1 coat (thinned) 1 hr
Pre Primer Yacht Primer DO NOT USE DO NOT USE 1 coats (thinned 10-15%) DO NOT USE 8 hrs
Primer Yacht Primer DO NOT USE 1 coat - 1 coat -
Filler
(if needed)
Surfacing Putty 257 YES YES YES YES 4 hrs
Primer Yacht Primer DO NOT USE 1-2 coats 1-2 coats 1-2 coats -
Primer/ Undercoater Pre-Kote 1-2 coats 1-2 coats 1-2 coats 1-2 coats 8 hrs
Topcoat Toplac® or Brightside® 2 coats 2 coats 2 coats 2 coats 12 hrs
*Minimum wait time between coats or between overcoating with the next step in the system, at a temperature of 73°F.

Disclaimer: Charts apply to Interlux products only. The information provided is not intended to be exhaustive. Because iboats.com does not know how this information is being used, they cannot take responsibility for any actions as a result.

The performance of marine paint on many factors outside the control of iboats.com, including surface preparation, proper application, and environmental conditions. Therefore, iboats.com cannot guarantee this product's suitability for your particular purpose or application.

By purchase or use of this product, buyer agrees that the sole and exclusive remedy, if any, is limited to the refund of the purchase price or replacement of the product at iboats.com's option.

This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
Dollar after dollar of sitewide savings!
Dollar Days Sale!