ProSport Generation 2 on-board marine battery chargers new features include:
- 3 built-in performance charge profiles for flooded, GEL and AGM batteries
- Expanded LED status center for real time status of AC power, charge mode, battery type and ready
Charge profiles can be programmed and reprogrammed with simplicity. ProSport delivers increased power and performance for faster charge times with its rugged 100% waterproof/shockproof design utilizing Advanced Electronic Technology in a heavy duty compact and lightweight case. The ProSport series still features Distrubuted-On-Demand™ charging--so 100% of the output is always used, distributing total available charging amps to one bank or a combination of all banks as required. Fully automatic, multistage charging with a safe maintenance mode for long- or short-term storage. Dynamic thermal output control gives you the appropriate charging amps while maintaining the proper temperature. Built-in ignition, reverse polarity, overheat, and short-circuit protection. Fully prewired. Manufacturer's two-year warranty.
Recreational Sport Fishing & Boating
On-Board Marine Battery Chargers
Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks
Automatic Multi-Stage Charging
Charges and conditions batteries with a built in safe maintenance mode for long and short term storage
Extruded Aluminum Housing
For superior heat transfer and durability
Waterproof and Shock Resistant
Saltwater tested for coastal sport fishing and boating
Lead Acid / Gel Battery Selectable
One time user selector provides optimum charge for either battery type
Dynamic Thermal Output Control
Provides appropriate charging amps to your batteries while maintaining recommended charger temperature
Reverse polarity, ignition & temperature protection
LED Power and Charge Indicators
At-a-glance power and charging status
Pre-wired for Easy Installation
2 Year Warranty
|ProSport 1.5 Portable
||2.2" x 2.5" x 3.3"
|ProSport 1.5 On-Board
||2.2" x 3.5" x 3.9"
||5.75" x 7.25" x 2.5"
||7" x 7.25" x 2.5"
||8.5" x 7.25" x 2.5"
||10.75" x 7.25" x 2.5"
|ProSport 20 Plus
||10.75" x 7.25" x 2.5"
Multi-Stage Charging Overview
During this mode the ProSport will use its available charging amps
(as controlled by temperature) until battery voltage is raised to 14.6
VDC ( lead acid factory setting).
The ProSport will hold batteries at 14.6 VDC ( factory set for lead acid
batteries) to complete charging while conditioning batteries by
desulfating each battery connected. Upon completion the ProSport
will go to into its maintenance mode.
During this mode the red "Charging" LED will turn off indicating that
the charging process is over and the charger is now maintaining your
batteries on-board. Only the green LED will remain on, indicating
Power On / Float-Maintenance mode. A precision 13.3 volts (lead acid
factory setting) finishing voltage that maintains each battery (step
down voltage regulation mode) which is perfect for short or long
storage periods and will never overcharge your batteries. Note: The only LED Indicator that will be on during the maintenance
mode will be the green "Power" LED indicator.