Prop Master Propeller Wrench

Prop Master Propeller Wrench, 1-1/16" - T-H Marine Supply
Your Price: $8.51
Save: $2.18
(20% Off $10.69)
Part # PMW-1-DP ValueShip™ Eligible
T-H Marine Supply

Fits all 1-1/16" prop nuts (40hp & up). Rugged nylon resists stripping. 9/16" garboard drain socket on back. Non-corrosive in salt environment.

This 1 1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and other chemicals. The Prop Master is less expensive than metal wrenches which rattle and can cause damage to your boat. However, it has plenty of brawn to get the job done. The Prop Master will tighten all 1-1/16" propeller nuts without slipping or stripping. (OMC - over 40 HP, Mercury - over 50 HP) High visibility color makes it easy to locate in dark boat compartments. The Prop Master also has a 9/16" garboard drain plug socket on the reverse side. Will not corrode in the salt water environment.

Based On 88 Reviews | Write Review
prop wrench
by Thomas from Peach Tree City, Georgia on September 20, 2014
works great
Was this review helpful?
Great!
by Gregory from Windsor, Nova Scotia on September 15, 2014
Awesome Service!
Was this review helpful?
Perfect tool for changin on the water...
by Brent from Noonan, North Dakota on September 02, 2014
Small lightweight tool that allows quick change of props on the go. I still would torque the nut with a proper tool, however this will get you going in a pinch.
Was this review helpful?
Bon produit
by Yvon from Maniwaki, Quebec on August 31, 2014
Produit conforme à mes attentes
Was this review helpful?
Wrench
by Ty from Jacksonville, Florida on August 27, 2014
Arrived quickly, haven't used it yet.
Was this review helpful?
prop wrench
by Jeff from Arcadia, Indiana on August 19, 2014
Nice product good service
Was this review helpful?
excellent piece of equipment
by Ronald from Riverview, Florida on August 16, 2014
I received it very quickly and it fits perfect, and now has a place in our boat as I don't have to worry about dropping it in the water and losing it
Was this review helpful?
as advertised
by Josephus from Bronson, Florida on August 02, 2014
This wrench works as advertised. Noncorrosive and easy to store aboard in the event you need to do a propeller change while on the water
Was this review helpful?
Worked perfectly
by Michael from Jamestown, North Dakota on July 30, 2014
This wrench was perfect and priced right for getting the job done!
Was this review helpful?
11
by Scott from Parowan, Utah on July 29, 2014
works perfectly.
Was this review helpful?
Great products
by Mark from Ashland, Kentucky on July 16, 2014
I was very pleased with all my products and will shop with you again thank you so much =)
Was this review helpful?
Does the job!
by Wade from Mifflintown, Pennsylvania on July 15, 2014
Does the job, and it floats!
Was this review helpful?
prop wrench
by Jesus from Lafayette, Colorado on July 14, 2014
Very good fit and very durable
Was this review helpful?
great
by William from Hemet, California on June 07, 2014
happy with purchase
Was this review helpful?
Broken Wrench
by Timothy from Durham, North Carolina on June 04, 2014
I unpacked from box, walked over to boat to remove nut with this wrench and it immediately broke. So, it lasted about 10 seconds.
Was this review helpful?
Prop Master Propeller Wrench, 1-1/16" - T-H Marine Supply
by Julio from Morriston, Florida on May 28, 2014
stripped out first time used
Was this review helpful?
Prop wrench
by John from Port St Joe, Florida on May 21, 2014
Works well delivered on time
Was this review helpful?
Works as advertised
by Kyle from Glendive, Montana on April 14, 2014
seems ok haven't got a chance to use it yet but should work as advertised
Was this review helpful?
Better than expected
by Stephen from Lawrenceville, Georgia on March 24, 2014
You would think that this wrench being made out of nylon would mean that it flexes and would be no good for anything. The complete opposite is true. It is a very strong and s y tool. The one I received is bright yellow making it easy to identify in my boat toolbox. Great value if you are only going to be changing your prop once or 100 times.
Was this review helpful?
GREAT IDEA, BAD WRENCH
by James from OLD Hickory, Tennessee on December 18, 2013
LOVE THE IDEA OF A NON METALLIC LIGHT WEIGHT WRENCH IN THE BOAT BUT THIS ONE DID NOT EVEN LAST THE FIRST PROP REMOVAL. IT STRIPPED OUT BEFORE THE FIRST NUT WAS REMOVED.
Was this review helpful?
Unecessary
by Fred from Ogden, Utah on September 24, 2013
The product looks ok, but to install the prop we needed a torque wrench which made the prop wrench superfluous
Was this review helpful?
will do the job
by James from Davenport, Iowa on September 04, 2013
i would prefer to use a metal socket and rachet, having this on my boat will mean that i will never need to use it, but if i have to i have a wrench on my boat
Was this review helpful?
Great tool to have
by Cal from Cedar HIlls, Utah on September 02, 2013
Beats looking for the cresent wrench and I can keep it handy, right with the boat.
Was this review helpful?
Waste of $
by Robert from Cornelius, North Carolina on August 20, 2013
This wrench was not able to remove the nut. Too flimsy! A standard 1-1/16" socket and breaker bar is the right tool!
Was this review helpful?
works Great
by Kenneth from Patterson, New York on August 19, 2013
Th plastic boat nut wrench works good and will not rust. I leave it on my boat for a quick propeller change.
Was this review helpful?
PROPELLER WRENCH
by Mitchell from Wilmington, Ohio on August 14, 2013
Exactly as advertised and worked great.
Was this review helpful?
Does what its supposed to
by Jeff from LoganVille, Georgia on August 13, 2013
The wrench did what it was supposed to do. Mainly tighten the nut on my prop. Mine did break when i was cranking down on it to get the tabs lined up. Of course after i broke it i read the part about torquing to the manufacturers sugested torque. When i need a new prop ill buy another.
Was this review helpful?
Cheap plastic
by Kameron from Oak Point, Texas on August 12, 2013
I was surprised that this was made entirely of cheap plastic. It broke on first use. Save your money and just use an adjustable wrench.
Was this review helpful?
Excellent tool for prop replacement
by Judd from Luck, Wisconsin on August 07, 2013
Wrench worked perfectly for me as it was the first time I had ever used it or replaced a prop. I have confidence I could do it in an emergency due to this tool being perect size and that it floats as well. Thanks
Was this review helpful?
Wrench
by Stephen from Wentzville, Missouri on August 06, 2013
Nice wrench for the money.
Was this review helpful?
good wrench
by Evelyn from Fayetteville, North Carolina on August 06, 2013
quick delivery, worked well
Was this review helpful?
GARBAGE
by Robert from Orland Park, Illinois on July 29, 2013
BROKE IN TO 3 PARTS ON FIRST USE, DO NOT BUY BEWARE
Was this review helpful?
fits good
by Peter from Winnipeg, Manitoba on July 21, 2013
works well light. fit good. what more do you need
Was this review helpful?
prop wrench
by Michael from Goshen, Indiana on July 13, 2013
The wrench bends when trying to take the prop nut off. The 4 stroke Yamaha had the factory prop (installed by the factory) could not be budged. Had to use and air impact to remove the nut.
Was this review helpful?
Not for heavier torque
by Kirk from Monument, Colorado on July 12, 2013
Okay for 55lbs spec. Broke on 100 lbs spec
Was this review helpful?
Worked great
by Fernado from Hittiesburg, Mississippi on July 02, 2013
Easy to use
Was this review helpful?
great wrench
by Mark from Supply, North Carolina on July 02, 2013
This wrench did exactly what it is supposed to do. Even removing a nut thats been on for yeats
Was this review helpful?
olman
by Kenneth from Buford, Georgia on June 29, 2013
sucks stripped out first time I used it had to get towed to shore
Was this review helpful?
Sweet Tool!
by Daniel from Phoenix, Arizona on June 28, 2013
What a fantastic idea for a boaters tool. Prop bilge drain plug combo wrench, in a lightweight nylon design. Wish I would have patented this idea!! Good tool, good price, no rust, no weight! How can you possibly go wrong with having one of these??...answer is you cant. Be a pro, don't be a cheapskate get one for each of your boats.
Was this review helpful?
Tool review
by Bryce from Warner Robins, Georgia on June 23, 2013
Good tool and figment, however tool is a little flimsy because of material is constructed of plastic.
Was this review helpful?
Plastic Prop Wrench
by Lynn from Plymouth, Indiana on June 16, 2013
Haven't used yet. Not sure what will happen if it gets on a tight nut considering it's plastic. It only has to work once if your in a pinch.
Was this review helpful?
prop wrench
by Richard from Bartlett, Illinois on June 11, 2013
n/a
Was this review helpful?
Plastic
by Robert from Austin, Texas on June 06, 2013
Did the job but only good for a few times. Plastic feels like it's going to break and slips of the nut.
Was this review helpful?
Works well
by John from Jackson, Georgia on May 11, 2013
This wrench is convenient to carry on boat
Was this review helpful?
Good Prop Wrench
by Jerrad from Valentine, Nebraska on May 07, 2013
Purchased this for an on-boat prop wrench for emergencies. Haven't used it yet (fortunately) and haven't tested to see if it floats but it fits the prop nut and I believe that it will work fine in removing/installing prop nuts on the water/at the lake. Due to the poly construction, I also believe that it might suit better for an emergency item rather than a boat service technician who might use it constantly.
Was this review helpful?
Prop Master Propeller Wrench
by William from Shilo, Manitoba on May 05, 2013
Was chepper than any other store.
Was this review helpful?
Cheap Plastic Crap
by David from Rison, Arkansas on April 16, 2013
I tourqed my prop to specs and tried to loosen it with this wrench and it broke instantly. Might work good on light weight stuff but my prop tightens to 55 and this wrench won't handle anything near that. Wasted my money....
Was this review helpful?
Prop wrench and prop
by Robert from Naples, Florida on March 26, 2013
Prop wrench fine pity your props don't fit standard drives!
Was this review helpful?
works well
by Robert from Ogdensburg, New York on September 21, 2012
works well
Was this review helpful?
Prop wrench
by Daniel from Sault Sainte Marie, Michigan on September 17, 2012
A must for every boat!
Was this review helpful?
Prop Wrench
by Albert from Paris, Texas on September 17, 2012
It's a good product i would recommend it
Was this review helpful?
efective
by Orman from Corpus Christi, Texas on September 15, 2012
It is light weight, will not rust, and if used carefully works OK.
Was this review helpful?
Handy Tool
by Joseph from Omaha, Nebraska on August 25, 2012
I really like this for changing out my prop and it doubles for taking out drain plug. It is also light weight.
Was this review helpful?
Wrench
by William from St.Louis, Missouri on August 14, 2012
Kind of flimsy... but worked,feels like I might break it. Made out of plastic flexes too much and slips off nut.
Was this review helpful?
FAIR PRODUCT, GOOD PRICE, FAST DELIVERY
by Brian from Callander, Ontario on August 14, 2012
A prop wrench is a prop wrench, no big deal. However, what I am very happy with is that iboats.com created a complete propeller package for my specific needs. The right hub, the right spacers, crown nut, cotter pin, wrench was optional, but it being shown reminded me that I needed one. So what I'm saying is that I am praising the value-added service provided by iboats.com
Was this review helpful?
Prop wrench
by Wade from Alpharetta, Georgia on August 12, 2012
This product is cheaply made. It functions but is not durable. Mechanics tools are not intended to be plastic
Was this review helpful?
Won't remove prop nut
by Michael from Bedford, New Hampshire on August 07, 2012
The wrench stripped when I attempted to remove my existing prop nut, rendering the tool useless. I had to go to the hardware store to purchase a proper steel socket. When I ordered the tool, I thought the interior surface of the wrench would have a stainless steel insert. I don't recommend the product.
Was this review helpful?
Prop Wrench Comments
by Gilbert from Avon, Indiana on August 02, 2012
Have not used the wrench yet so I don't know how it will work. Hope it works as advertized.
(0 of 2 people found this review helpful)
Was this review helpful?
Does the job and quick
by Michael from Kennett Square, Pennsylvania on August 01, 2012
None
Was this review helpful?
prop wrench
by Mitchell from Fredericton, New Brunswick on July 30, 2012
very good service
(0 of 1 people found this review helpful)
Was this review helpful?
GOOD JOB.
by Mike from Jefferson City, Missouri on July 25, 2012
.
Was this review helpful?
Junk
by John from Canalou, Missouri on July 25, 2012
An absolute POS item. Handle broke the 1st time I tried to use it, on the first turn after hand-tight
(1 of 1 people found this review helpful)
Was this review helpful?
Great piece of kit
by Glen from Oromocto, New Brunswick on July 16, 2012
Neat wrench for daily use around the rear of your boat
Was this review helpful?
Slips on Prop nut
by John from Apple Valley, Minnesota on July 14, 2012
This wrench slips when trying to tighten the prop nut. My prop requires 70-80 ft lbs of torque and as you apply force the plastic deforms on the wrench. It then loses its ability to grip the nut. I would not buy this product.
Was this review helpful?
Propeller wrench
by Clement from Qubec, Quebec on June 28, 2012
fast delivery, i am satisfied
Was this review helpful?
Propeller wrench
by Bertus from Walnutport, Pennsylvania on June 25, 2012
Handy to have. It does not provide or allow exessive torque to be applied and it does not scratch or otherwise dammage the propeller and surrounding harware.
Was this review helpful?
Works fine
by Robert from Sheridan, California on June 21, 2012
It's a prop wrench and works good.
Was this review helpful?
wrong choice
by Brian from Cedar, Kansas on June 08, 2012
Not very happy with this - shoulda gotten a metal wrench instead of the plastic....plastic head stripped out first try !! I HIGHLY DO NOT recomend this ....save your money and buy a metal one
Was this review helpful?
Nice and light, good to keep on the boat.
by Jason from Strongsville, Ohio on June 02, 2012
Works great for the price. Is only nylon though so I could see improper use leading to stripping of the socket end. Would buy again especially for keeping on the boat for those unfortunate prop mishaps.
Was this review helpful?
prop wrench
by Thomas from Goose Bay, Newfoundland & Labrador on May 28, 2012
good product
Was this review helpful?
Not ideal for prop changes
by Steven from New Port Richey, Florida on May 23, 2012
I honestly didn't know what to expect from a plastic wrench, but I wasn't really able to do a decent prop change job using it - the downside of plastic for use as a wrench should have been apparent. I ended up having to use a normal metal adjustable, and a socket would have been even better but I didn't have a large enough one with me on vacation when I had to do an emergency prop repair.
Was this review helpful?
decent
by Blake from Webster, Texas on May 21, 2012
the handle is a little weak. It didn't break, but would bend quite a bit. ok for emergency, but i wouldn't use it a ton.
Was this review helpful?
wrench
by Larry from Wichita, Kansas on April 14, 2012
Works just as you stated
Was this review helpful?
Great
by David from Palmer, Texas on April 12, 2012
Shipped on time, just what I needed
Was this review helpful?
Great emercency wrench
by Steven from Morrisville, Pennsylvania on March 29, 2012
been wanting one of these for years the price was right finally got one hope I never need it but at least I have it now
Was this review helpful?
Great Company - Great Product
by Hayden from Grenada, Mississippi on March 23, 2012
Very please with this product...all parts were included....easy installation...purchased this product based on other reviews...Hats off to iboats.com...fast shipping...GREAT prices...will do business with them again.
Was this review helpful?
propeller wrench
by Michael from Brandon, Mississippi on March 19, 2012
it works
Was this review helpful?
Product just as described
by Jeffrey from Bethel Park, Pennsylvania on September 13, 2011
I would like to see the back of the wrench have a standard 1/2" hole to allow for a torque wrench to be used with it.
Was this review helpful?
great buy
by Alejandro from LAS Vegas, Nevada on July 25, 2011
for the price its a on time thanks a lot great product, the delivery was quick and
(2 of 2 people found this review helpful)
Was this review helpful?
excellent product
by Ishraaq from Danbury, Connecticut on July 13, 2011
Light weight and very strong
Was this review helpful?
Great Tool
by Christopher from Haymarket, Virginia on July 12, 2011
This was a nice and light tool. It gave me good leverage and I like that it is a hard plastic tool
Was this review helpful?
Prop Wrench,
by Allen from Kemptville, Ontario on July 07, 2011
works just fine.
Was this review helpful?
Not much to rate. It works, light weight it floats, and its oversized so its easy to find!
by Marcus from Columbus, Ohio on July 06, 2011
Not much to rate. It works,it's light weight,it floats,and its oversized so its easy to find!
Was this review helpful?
Plastic Prop Wrench
by Peter from Tucson, Arizona on July 05, 2011
Worked ok, may not be durable over the long term.
Was this review helpful?
looks nice
by Douglas from Byron, Michigan on June 20, 2011
looks good and wont rust. but the handle is a little curved. ( not staight ) Have not used it yet.
Was this review helpful?
Prop Master Propeller Wrench
by Larry from Sneads Ferry, North Carolina on June 18, 2011
Wrong size wrench for this engine. Too inexpensive to ship back - stuck again.
(0 of 1 people found this review helpful)
Was this review helpful?
Just the right size
by Harold from Clearwater, Florida on June 18, 2011
Won't corrode and fits like a glove - saving you from carrying wrenches that can fall in the water.
(1 of 1 people found this review helpful)
Was this review helpful?
great
by Steven from International Falls, Minnesota on June 07, 2011
works great
(1 of 1 people found this review helpful)
Was this review helpful?
Ask a question for
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
September Savings! Enjoy deep discounts on thousands of clearance and winterizing items.