Propeller Nuts, Tab Washers, Thrust Spacers And Kits

Blowout
Closeout Savings! Limited Quanity, Return Restrictions Apply.
Propeller Tab Washer - Sierra
Your Price: $18.99
Save: $6.74
(26% Off $25.73)
Part # 18-3200-9 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Fish Line Protector Spacer - Sierra
Your Price: $61.99
Part # 18-4208 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Fish Line Protector Spacer - Sierra
Your Price: $62.99
Part # 18-4209 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Cone and Cone Screw - Sierra
Your Price: $47.99
Save: $10.41
(17% Off $58.40)
Part # 18-4210 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Plastic Propeller Washer - Sierra
Your Price: $5.99
Save: $0.90
(13% Off $6.89)
Part # 18-4211 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Cone Screw 5/16" 18 - Sierra
Your Price: $11.99
Save: $2.97
(19% Off $14.96)
Part # 18-4212 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Propeller Spacer - Sierra
Your Price: $29.99
Save: $6.26
(17% Off $36.25)
Part # 18-4213 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Hurry! Only 1 left in stock
Propeller Locking Washer - Sierra
Your Price: $8.99
Save: $2.71
(23% Off $11.70)
Part # 18-4214 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Propeller Thrust Washer - Sierra
Your Price: $22.99
Save: $4.18
(15% Off $27.17)
Part # 18-4220 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Propeller Thrust Washer - Sierra
Your Price: $17.99
Save: $3.93
(17% Off $21.92)
Part # 18-4221 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Thrust Washer - Sierra
Your Price: $31.99
Save: $5.06
(13% Off $37.05)
Part # 18-4222 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Thrust Washer - Sierra
Your Price: $28.99
Save: $6.40
(18% Off $35.39)
Part # 18-4223 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Propeller Spacer - Sierra
Your Price: $3.99
Save: $0.48
(10% Off $4.47)
Part # 18-4228 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Thrust Washer - Sierra
Your Price: $32.99
Save: $7.79
(19% Off $40.78)
Part # 18-4229 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Thrust Washer - Sierra
Your Price: $43.99
Save: $8.27
(15% Off $52.26)
Part # 18-4230 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Hurry! Only 1 left in stock
No Reviews | Write Review | Ask Question
Propeller Spacer - Sierra
Your Price: $14.99
Save: $1.88
(11% Off $16.87)
Part # 18-4231 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Spacer - Sierra
Your Price: $3.99
Save: $1.00
(20% Off $4.99)
Part # 18-4232 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Propeller Thrust Washer - Sierra
Your Price: $13.99
Save: $2.41
(14% Off $16.40)
Part # 18-4233 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Spacer - Sierra
Your Price: $69.99
Part # 18-4234 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Hurry! Only 1 left in stock
No Reviews | Write Review | Ask Question
Propeller Lock Nut - Sierra
Your Price: $9.99
Save: $1.96
(16% Off $11.95)
Part # 18-3700 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Nut Kit - Sierra
Your Price: $9.99
Save: $1.70
(14% Off $11.69)
Part # 18-3701 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Nut Kit - Sierra
Your Price: $9.99
Save: $3.00
(23% Off $12.99)
Part # 18-3701D ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Propeller Lock Nut - Sierra
Your Price: $12.99
Save: $2.19
(14% Off $15.18)
Part # 18-3704 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Nut Kit - Sierra
Your Price: $9.99
Save: $1.50
(13% Off $11.49)
Part # 18-3702 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Nut Kit - Sierra
Your Price: $10.99
Save: $1.75
(13% Off $12.74)
Part # 18-3702D ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Propeller Nut Kit - Sierra
Your Price: $18.99
Save: $5.17
(21% Off $24.16)
Part # 18-3715 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Nut Kit - Sierra
Your Price: $20.99
Save: $5.84
(21% Off $26.83)
Part # 18-3715D ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Mallory Prop Nut Kit 9-73961
Your Price: $9.99
Save: $1.50
(13% Off $11.49)
Part # 9-73961 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Hurry! Only 1 left in stock
No Reviews | Write Review | Ask Question
Propeller Nut Kit - Sierra
Your Price: $8.99
Save: $1.60
(15% Off $10.59)
Part # 18-3716 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Propeller Nut Kit - Sierra
Your Price: $8.49
Save: $3.29
(27% Off $11.78)
Part # 18-3716D ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Mallory Spacer, Prop 9-73905
Your Price: $13.99
Save: $2.19
(13% Off $16.18)
Part # 9-73905 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Mallory NUT, PROPELLER 9-73901
Your Price: $11.99
Save: $2.42
(16% Off $14.41)
Part # 9-73901 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Mallory Washer, Tab 9-73900
Your Price: $1.99
Save: $0.50
(20% Off $2.49)
Part # 9-73900 ValueShip™ Eligible
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
Hurry! Only 1 left in stock
LOCKWASHER - Mallory
Holiday Sale Price: $1.99
Part # 9-78144
SHIPS TOMORROW!* if ordered in 21 hrs 35 mins.
No Reviews | Write Review | Ask Question
Sierra
For Mercury/Mariner, MerCruiser, Johnson/Evinrude, Yamaha, Chrysler/Force, Volvo and other Makes. Please see shop catalog for detailed application charts.
Propeller Tab Washer - Sierra
Replaces OEM part #
  • CHRYSLER FORCE F697140
  • HONDA 90508-ZW1-003 For: 75-90 HP
  • MERCURY MARINE 14-31210
  • MERCURY MARINE 14-816629
  • PLEASURECRAFT R096117
Package of 10
Fish Line Protector Spacer - Sierra
Replaces OEM part #
  • VOLVO 839423-1
    For: AQ280, 290

Fish Line Protector Spacer for Volvo Penta 839423-1, GLM 23150

Fish Line Protector Spacer - Sierra
Replaces OEM part #
  • VOLVO 839534-5
    For: AQ250, 270, 275

Fish Line Protector Spacer for Volvo Penta 839534-5, GLM 23160

Propeller Cone and Cone Screw - Sierra
Replaces OEM part #
  • VOLVO 850785-7
  • VOLVO 854045-2
    AQ200, 250, 270, 270T, 275, 280, 280T, 280PT, 290

Propeller Cone for Volvo Penta 850785-7 854045-2, GLM 23040

Plastic Propeller Washer - Sierra
Replaces OEM part #
  • VOLVO 850888-9

Plastic Washer for Volvo Penta 850888-9, GLM 23070

Propeller Cone Screw 5/16" 18 - Sierra
Replaces OEM part #
  • VOLVO 850889-7

Propeller Cone Screw 5/16" 18 for Volvo Penta 850889-7, GLM 23240

Propeller Spacer - Sierra
Replaces OEM part #
  • VOLVO 851261-8
  • VOLVO 854047-8
    For: AQ275, 280, 290
Propeller Locking Washer - Sierra
Replaces OEM part #
  • PLEASURECRAFT RO96081
  • VOLVO 897367-9

For: AQ Drive Units: 200, 250, 270, 270T, ( TID UTF ) 275, 280, 280T, 280PT ( TID UTF )

Locking Washer for Volvo Penta 897367-9, Pleasurecraft RO96081, GLM 23060

Propeller Thrust Washer - Sierra
Replaces OEM part #
  • MERCURY MARINE 12-835467 1
  • MERCURY MARINE 13171
  • MERCURY MARINE 77987
  • PLEASURECRAFT RO096116
For: Mercury / Mariner- V-6 Outboards & Mercruiser Sterndrives
Propeller Thrust Washer - Sierra
Replaces OEM part #
  • MERCURY MARINE 13191A1
  • MERCURY MARINE 75282A1

  • For Mercury Marine: 4 & 6 Inline, 75 - 150 HP
Propeller Thrust Washer - Sierra
Replaces OEM part #
  • OMC 318841
  • OMC 127084

Thrust Washer for Johnson/Evinrude 318841 127084, OMC Sterndrive/Cobra, GLM 22230

Propeller Thrust Washer - Sierra
Replaces OEM part #
  • OMC 333592

Thrust Washer for Johnson, Evinrude 333592, OMC Sterndrive Cobra, GLM 22220

Propeller Spacer - Sierra
Replaces OEM part #
  • OMC 315810

Propeller Spacer for Johnson/Evinrude 315810, OMC Sterndrive/Cobra, GLM 22250

Propeller Thrust Washer - Sierra
Replaces OEM part #
  • OMC 319890
Propeller Thrust Washer - Sierra
Replaces OEM part #
  • OMC 320305

Thrust Washer for Johnson, Evinrude 320305, GLM 22240

Propeller Spacer - Sierra
Replaces OEM part #
  • OMC 320570

Propeller Spacer for Johnson, Evinrude 320570, OMC Sterndrive Cobra, GLM 22190

Propeller Spacer - Sierra
Replaces OEM part #
  • OMC 323943

Propeller Spacer OM#323943 for Johnson, Evinrude 323943, GLM 22260

Propeller Thrust Washer - Sierra
Replaces OEM part #
  • MERCURY MARINE 73345A1
    ( 35 - 70 HP )
Spacer - Sierra
Replaces OEM part #
  • VOLVO 832965-8
    For: AQ110S, 200
Propeller Lock Nut - Sierra
Replaces OEM part #
  • CHRYSLER FORCE F7000
  • HONDA 90301-ZW1-003
  • MERCURY MARINE 11-52707
  • PLEASURECRAFT R017066
Propeller Nut Kit - Sierra
Replaces OEM part #
  • MERCURY MARINE 11-52707Q1
  • MERCURY MARINE 11-52707A1
Kit Contains:
  • (2) 18-3200 Tab Washer - replaces O.E. # 14-31210, 14-816629, F697140, 90508-ZW1-003, R096117
  • (1) 18-3700 Prop Nut - replaces O.E. # 11-52707, F7000, 90301-ZW1-003, R017066
Propeller Nut Kit - Sierra
Replaces OEM part #
  • MERCURY MARINE 11-52707Q1
  • MERCURY MARINE 11-52707A1
Kit Contains:
  • (2) 18-3200 Tab Washer - replaces O.E. # 14-31210, 14-816629, F697140, 90508-ZW1-003, R096117
  • (1) 18-3700 Prop Nut - replaces O.E. # 11-52707, F7000, 90301-ZW1-003, R017066
Propeller Lock Nut - Sierra
Propeller Lock Nut - Sierra
Replaces OEM part #
  • MERCURY MARINE 11-69578

Propeller Nut for Mercury, Mariner 11-69578A1 11-69578Q1, GLM 21240 21260

Propeller Nut Kit - Sierra
Replaces OEM part #
  • MERCURY MARINE 11-69578T1
  • MERCURY MARINE 11-69578Q1
  • MERCURY MARINE 11-69578A1

  • Contains:

  • 18-3204 Tab Washer, replaces O.E.# 14-76281
    18-3704 Prop-Nut, replaces O.E.# 11-69578
Propeller Nut Kit - Sierra
Replaces OEM part #
  • MERCURY MARINE 11-69578T1
  • MERCURY MARINE 11-69578Q1
  • MERCURY MARINE 11-69578A1

  • Contains:

  • 18-3204 Tab Washer, replaces O.E.# 14-76281
    18-3704 Prop-Nut, replaces O.E.# 11-69578
Propeller Nut Kit - Sierra
Kit Contains:
    (1) 18-3708 Prop Nut - replaces O.E.# 398042
    (1) 18-3741 Cotter Pin - replaces O.E.# 309955
    (1) 18-4231 Prop Spacer - replaces O.E.#320570

Propeller Nut Kit - Sierra
Kit Contains:
    (1) 18-3708 Prop Nut - replaces O.E.# 398042
    (1) 18-3741 Cotter Pin - replaces O.E.# 309955
    (1) 18-4231 Prop Spacer - replaces O.E.#320570

Mallory Prop Nut Kit 9-73961
Replaces Original Equipment Manufacturer(OEM):Mercury
Replaces Original Equipment Manufacturer # (OEM #):11-69578Q 1
Fits Application:30-60 hp
Propeller Nut Kit - Sierra
Replaces OEM part #
  • OMC 175267
Kit Contains:
    (1) 18-3705 Prop Nut - replaces O.E.# 314503
    (1) 18-3742 Cotter Pin - replaces O.E.# 314502
    (1) 18-4228 Prop Spacer - replaces O.E.# 315810

Propeller Nut Kit for Johnson/Evinrude, OMC Sterndrive/Cobra 175267, GLM 22350 22340

Propeller Nut Kit - Sierra
Replaces OEM part #
  • OMC 175267
Kit Contains:
    (1) 18-3705 Prop Nut - replaces O.E.# 314503
    (1) 18-3742 Cotter Pin - replaces O.E.# 314502
    (1) 18-4228 Prop Spacer - replaces O.E.# 315810

Mallory Spacer, Prop 9-73905
Mallory Spacer, Prop 9-73905
Replaces GLM #:22190
Replaces Original Equipment Manufacturer(OEM):JOHNSON-EVINRUDE
Replaces Original Equipment Manufacturer # (OEM #):320570
Fits Application:90 hp & up
Mallory NUT, PROPELLER 9-73901
Replaces GLM #:21260
Replaces Original Equipment Manufacturer(OEM):Mercury
Replaces Original Equipment Manufacturer # (OEM #):11-69578
Fits Application:35-70 hp Mercury Outboards
Mallory Washer, Tab 9-73900
Replaces GLM #:21210
Replaces Original Equipment Manufacturer(OEM):Mercury / Mercruiser
Replaces Original Equipment Manufacturer # (OEM #):14-816629
Fits Application:70hp & up, & Mercruiser
LOCKWASHER - Mallory
Lock Washer
Replaces: Mercruiser 13-78968
Average Customer Review for Fish Line Protector Spacer - Sierra
Based On 3 Reviews | Write Review
Line cutter
by Gerald from Long Sault, Ontario on June 18, 2013
The wrong part was ordered. I had to reorder an OEM line cutter from Iboats. I was reimbursed and all is good.
Was this review helpful?
Fish line
by Gerald from Long Sault, Ontario on June 12, 2013
After further discussion with a separate iboats salesman, I found out this wasn't the right protector for my boat. I subsequently ordered the correct one and returned this one.
Was this review helpful?
Fits
by Brian from Delaware, Ohio on March 04, 2012
Fits
Was this review helpful?
Average Customer Review for Fish Line Protector Spacer - Sierra
Based On 2 Reviews | Write Review
Fits perfectly
by Clifton from Geneseo, New York on May 13, 2013
Easy to install and so far working as it should be.
Was this review helpful?
Great product
by Christopher from Plattsburgh, New York on October 01, 2012
Perfect fit and finish.
Was this review helpful?
Average Customer Review for Propeller Cone and Cone Screw - Sierra
Based On 1 Review | Write Review
Simple
by Greg from Captain Cook, Hawaii on August 06, 2013
Worked great.
Was this review helpful?
Average Customer Review for Plastic Propeller Washer - Sierra
Based On 5 Reviews | Write Review
washer
by Nicholas from Buffalo, New York on August 04, 2013
Was the part I needed. Not much of a price difference if I was to buy local instead.
Was this review helpful?
great
by George from EL Paso, Texas on June 19, 2013
geat
Was this review helpful?
Washer
by Gerald from Long Sault, Ontario on June 18, 2013
Al's good
Was this review helpful?
Good
by Clifton from Geneseo, New York on May 13, 2013
This was what the parts manual says my boat suppose to have. I have to make sure it sits straight before I tighhten the cone nut. So far no problem.
Was this review helpful?
Fits
by Brian from Delaware, Ohio on March 04, 2012
Plastic washer....
(0 of 1 people found this review helpful)
Was this review helpful?
Average Customer Review for Propeller Spacer - Sierra
Based On 1 Review | Write Review
customer p.o. number 2287610
by Edwin from Seabeck, Washington on August 02, 2014
I was sent the wrong propeller and returned it. I received the correct prop. a couple days ago. In my attempt to install the new Prop. I encountered another problem with your parts ie propeller spacer p/n 18-4213 - sierra. the spacer slots would not fit the propeller cone 18-4210 you sent me in order 2287610 on 7/08/14. I have a spare spacer which I used for the new prop installation, however I don't understand how your logistics and commonality of parts works. Try fitting these two parts together, then write me a product review. Respectfully yours,
(1 of 1 people found this review helpful)
Was this review helpful?
Average Customer Review for Propeller Thrust Washer - Sierra
Based On 3 Reviews | Write Review
Right Product
by Brett from Huntingdon, Pennsylvania on July 26, 2012
It was easy...... Put a little info in and it shows all the parts that are needed.
(0 of 2 people found this review helpful)
Was this review helpful?
thrust washer
by Brian from Cedar, Kansas on May 28, 2012
shipped fast...fit perfectly...no complaints.....would recommend to everyone
Was this review helpful?
washer
by Bob from Calgary, Alberta on August 30, 2011
everything was a 100%
Was this review helpful?
Average Customer Review for Propeller Thrust Washer - Sierra
Based On 2 Reviews | Write Review
Good Quality
by Andrew from Ashtabula, Ohio on August 16, 2012
Exactly as described.
Was this review helpful?
thrust washer
by Norman from Pompano, Florida on August 31, 2011
perfect fit.
Was this review helpful?
Average Customer Review for Propeller Spacer - Sierra
Based On 2 Reviews | Write Review
great service
by Leslie from Port Angeles, Washington on June 14, 2013
I was very pleased with the service and the ability to find what I was looking for on the web site.
Was this review helpful?
good washer but....
by Jason from Winnipeg, Manitoba on September 07, 2011
i purchased with the michigan wheel hub system (vortex props) to have as a spare just in case..... but the hub systems sticks out further and i don't have room on the prop shaft to use..... but otherwise the spacer looks good solid and fits snug!
Was this review helpful?
Average Customer Review for Propeller Thrust Washer - Sierra
Based On 1 Review | Write Review
Thrust Washer
by Gerald from Binghamton, New York on July 20, 2013
Works well with my Michigan prop.
(1 of 1 people found this review helpful)
Was this review helpful?
Average Customer Review for Propeller Spacer - Sierra
Based On 1 Review | Write Review
Prop Washer
by Allan from Belfair, Washington on June 24, 2012
None at this time.
Was this review helpful?
Average Customer Review for Propeller Thrust Washer - Sierra
Based On 3 Reviews | Write Review
Good information
by Mike from Hopkinsville, Kentucky on August 16, 2013
Very knowledgeable
(0 of 1 people found this review helpful)
Was this review helpful?
top of the line
by John from Orange, Texas on May 20, 2013
It fit my 1987 35 HP
Was this review helpful?
Works great
by Gary from Albia, Iowa on January 18, 2012
THE RIGHT PART FOR THE JOB.THANKS
(1 of 1 people found this review helpful)
Was this review helpful?
Average Customer Review for Propeller Lock Nut - Sierra
Based On 2 Reviews | Write Review
Nut
by Charles from Casper, Wyoming on June 30, 2012
The nut you sent was the wrong size. Needed to be a 1" NOT a 1-1/16" so the washer was wrong also Propeller looks OK Haven't tried it yet.
Was this review helpful?
WRONG SIZE
by BOB from Industry, Pennsylvania on July 23, 2011
I WENT THROUGH THE WEB SITE PROCESS TO ORDER THE PROP I NEEDED AND IT AUTOMATICLY OFFERED ME THE OPTION OF BUYING THE PROP NUT AND OTHER ACCESSORIES THAT GO WITH THE PROP. EVERYTHING ELSE WORKED BEAUTIFULY BUT THE PROP NUT WAS TOO LARGE. SINCE IT COULDN'T BE RETURNED IF OPENED I JUST USED THE OLD NUT AND TOSSED THE NEW ONE.
(2 of 3 people found this review helpful)
Was this review helpful?
Average Customer Review for Propeller Nut Kit - Sierra
Based On 16 Reviews | Write Review
Perfect replacement part...
by Brent from Noonan, North Dakota on September 02, 2014
Exactly as described....worked well.
Was this review helpful?
It is what it is
by Joshua from Waverly, Iowa on May 29, 2014
NA
(0 of 1 people found this review helpful)
Was this review helpful?
Perfect Fit - Easy!
by Ronald from West Point, Mississippi on September 27, 2013
Nut and lock washer combo were an exact fit extra washer makes a good spare.
Was this review helpful?
good
by Kenneth from Patterson, New York on August 19, 2013
i am saving this kit for future propeller changes
Was this review helpful?
Propeller
by Erling from Abbotsford, British Columbia on June 21, 2013
I was not sure what propeller and nut I needed for a 1973 Mercury 650 after loosing them. Called in and their support was very knowledgeable and helpful. When the parts arrived, they were a perfect fit.
(2 of 2 people found this review helpful)
Was this review helpful?
Its a nut. It fit on there as it was supposed to
by Eric from Alpharetta, Georgia on May 17, 2013
Easy replacement, in fact I took the existing lock tab off of the prop and replaced it with one of these because these have the easy lifting loops. Does exactly what it is supposed to do.
Was this review helpful?
'77 chrysler 75hp 3cyl outboard
by Rex from Oklahoma City, Oklahoma on November 04, 2012
this product was no match for my old motor prop..it was way to big...returned and cost returned. I still neeed a prop nut for my unit,the owner before me was using a cotter pin only..that looks a bit scary...oops! there goes the prop,pull out the oars!
Was this review helpful?
Nut Kit
by William from St.Louis, Missouri on August 14, 2012
Perfect match
Was this review helpful?
prop nut kit
by Louise from Massueville, Quebec on July 30, 2012
very good service
Was this review helpful?
nut kit
by Brian from Cedar, Kansas on May 28, 2012
excellent quality.....recommend to anyone that needs replacement
Was this review helpful?
spare parts
by Donald from Yulee, Florida on October 04, 2011
Bought it for an extra
Was this review helpful?
Marine items
by Ray from Peshtigo, Wisconsin on September 21, 2011
Very fast service, reasonable price on item.
Was this review helpful?
Nuts and Bolts
by Roy from McCormick, South Carolina on August 26, 2011
They're nuts and bolts, what did you expect? They are good quality and work great.
Was this review helpful?
Hey, Its a Nut and Washer
by Roy from McCormick, South Carolina on August 09, 2011
Hey, Its a Nut and Washer, what do you expect? It does exactly what you want a nut and lockwasher to do. It seems to be sturdy enough. Buy with confidence.
Was this review helpful?
As shown
by Tom from Saint George, Utah on June 10, 2011
The propeelar nut kit fit the same as the original hardware.
(1 of 1 people found this review helpful)
Was this review helpful?
Review for Propeller Nut Kit for Mercruiser, Pleasurecraft, Mercury/Mariner 11-52707Q1 11-
by a Customer on September 17, 2008
(0 of 9 people found this review helpful)
Was this review helpful?
Average Customer Review for Propeller Lock Nut - Sierra
Based On 1 Review | Write Review
Great ser.
by Mike from Hopkinsville, Kentucky on August 16, 2013
Great
Was this review helpful?
Average Customer Review for Propeller Nut Kit - Sierra
Based On 14 Reviews | Write Review
Prop Nut Kit
by Jim from Branson, Missouri on November 26, 2014
Sorry, but I have not used it yet and do not plan to do so until spring time.
Was this review helpful?
oversized not right
by John from Melbourne, Arkansas on August 11, 2014
The nut was twice as tall as the stock one. the rubber engagement ring was still off the shaft when fully tightened. I had to reuse the original nut!!
Was this review helpful?
quality kit
by Thomas from Las Vegas, Nevada on March 08, 2014
This nut kit was the perfect match for propeller install. Nice to have as a spare, too.
Was this review helpful?
perfect fit
by Thomas from Las Vegas, Nevada on February 26, 2014
Perfect fit for my new prop. Could have used the old one, but having a new one, especially being a lock type nut is a good idea. And now I have a spare.
Was this review helpful?
super
by Kurt from Ogden, Utah on August 18, 2013
always a good idea to replace with new prop
Was this review helpful?
Prop Nut Washer
by Brian from Luskville, Quebec on August 07, 2013
New Prop Hub warrants a New Washer Nut. A minor expense for peace of mind.
Was this review helpful?
prop kit
by Aaron from Spring Valley, Minnesota on July 24, 2013
worked great. easy to install
Was this review helpful?
????????????????????????????
by Richard from Shrievport, Louisiana on May 02, 2013
Satisfied!
Was this review helpful?
Prop nut kit
by Wallace from Stony Mountain, Manitoba on September 05, 2012
Exactly what I ordered.
Was this review helpful?
prepared
by Donald from Des Plaines, Illinois on July 18, 2012
I got this extra nut kit to have when I drop my other one in the lake by accident!
Was this review helpful?
Fast shipping, perfect fit!
by Gary from Chandlerville, Illinois on February 26, 2012
Wow, what fast shipping and great service from IBoats!. This fit perfectly on my boat.
Was this review helpful?
RIGHT PARTS
by Gary from Albia, Iowa on January 18, 2012
Everthing fit just right.thanks for the speedy delivery.
Was this review helpful?
????
by Kenneth from Heyworth, Illinois on August 20, 2011
GOOD PRODUCT....
(0 of 1 people found this review helpful)
Was this review helpful?
Good
by Steven from Boerne, Texas on June 20, 2011
Good
(0 of 2 people found this review helpful)
Was this review helpful?
Average Customer Review for Propeller Nut Kit - Sierra
Based On 2 Reviews | Write Review
nice service
by Daniel from Tucson, Arizona on August 02, 2014
good quality fast shipping.
Was this review helpful?
SS Propellor
by Donnie from Seaside, Oregon on July 26, 2013
I have always used aluminum propellers but had issues with my takeoff speed. My prop would cavitate and it would take forever to get up on plane and go anywhere. I tried the 4 blade Stainless Steel prop and if my boat had tires it would spin them. My takeoff is quick and I am gone in a fraction of the time I use to take with the aluminum prop. I am very satisfied and it was well worth the price.
Was this review helpful?
Average Customer Review for Propeller Nut Kit - Sierra
Based On 18 Reviews | Write Review
A1
by Douglas S from East Lawrencetown, Nova Scotia on August 21, 2014
Good product fit perfect
Was this review helpful?
A-1
by Douglas S from East Lawrencetown, Nova Scotia on August 11, 2014
Good product at an excellent price
Was this review helpful?
nut kit
by Rich from San Antonio, Texas on September 15, 2013
Worked fine
Was this review helpful?
No Problems
by Dan from Bonneau, South Carolina on September 13, 2013
Fit the shaft and the motor exactly like it was supposed to. No problem, quick shipment.
Was this review helpful?
Good quality that I have come to expect from Sierra.
by Ray from Sequim, Washington on August 24, 2013
This prop nut kit is a good deal if you need a new castle nut, spacer and cotter pin. I basically wanted to start over fresh and all new with my new prop.
Was this review helpful?
propellor nut kit
by Eddie from Lake Charles, Louisiana on July 07, 2013
Products work like they are supposed to.
Was this review helpful?
kit
by John from Moses Lake, Washington on June 12, 2013
everything fit speedy del
Was this review helpful?
Prop Nut Kit
by Daniel from Phoenix, Arizona on June 06, 2013
It fits. It works. Decent price. Shipped quickly!
Was this review helpful?
Excellent Quality
by Andrew from Ashtabula, Ohio on August 16, 2012
Good, better than factory.
Was this review helpful?
perfect fit
by Seth from Concord, California on July 29, 2012
Title says it all!
Was this review helpful?
nut kit
by Mack from Spartanburg, South Carolina on June 19, 2012
works great
Was this review helpful?
works well, i think
by John from Temple, Texas on May 08, 2012
i only have one problem with this and that is the plastic washer. With the prop i recieved, there is not enough room for the washer and still get the nut tight enough for the cotter pin.
(1 of 1 people found this review helpful)
Was this review helpful?
accesseries for Prop
by Jerry from Weatherford, Texas on February 28, 2012
I purchased a prop and was not sure I needed any other parts. But, I order the Prop Nut Kit anyway! My sales person, Kit Kimball, was extremely helpful and I was delighted that she went the extra mile to answer my question and get info form the prop manufacture while I was waiting on hold. The attitude and help in my fustration was wonderful. Thanks for being there when I needed you!
Was this review helpful?
wrong product
by Mike from Palestine, Texas on November 08, 2011
ordered wrong product. did not know til after I had package tore open and they would not take back, according to paperwork.
Was this review helpful?
wrong diameter, not a good experience
by W. from McDonough, Georgia on November 01, 2011
I ordered the above kit, using the model year and model number off the motor plate. The nut and thrust washer are for a larger diameter prop shaft. I called I Boats and was given an 800 # to call for the correct one. That source claims to not carry parts for the 1983 model year. I should have been told that at the point of ordering. No idea where to turn now.
Was this review helpful?
nut kit
by Ron from alexis, Illinois on September 06, 2011
great product
Was this review helpful?
prop kit
by Norman from Pompano, Florida on August 31, 2011
works great.
Was this review helpful?
MrCrabs opin
by Douglas from Simpson, Illinois on July 18, 2011
product as advertised
Was this review helpful?
Average Customer Review for Mallory Washer, Tab 9-73900
Based On 2 Reviews | Write Review
Correctomundo
by Rick from Grangeville, Idaho on December 15, 2013
This tab washer is exactly right fit for your MR and Alpha 1 stern drive. Heavy made, it fits exactly right.
(1 of 1 people found this review helpful)
Was this review helpful?
Prop Tab Washers
by Michael from Jacksonville, Florida on July 17, 2013
Look sturdy. Have not used to date.
(0 of 1 people found this review helpful)
Was this review helpful?
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies