Uses Micron® Technology to provide excellent, long lasting antifouling protection against all types of fouling. Controlled polishing rate reduces build-up of old coatings and minimizes sanding. Haul and re-launch without repainting. Micron Technology uses less copper more efficiently than old fashioned high copper bottom paints.
Suitable for all power and sail, in all waters
Proven performance for over 20 years
Lloyds Register certified as TBT-free.
Below the waterline
GRP/FRP Lead Steel Wood Cast Iron
Suitable for Aluminum:
Suitable for High Fouling Areas:
Number of Coats:
Airless Spray Brush Conventional Spray Roller
Recommended No. of Coats
Practical Coverage (sq. ft/Gal)
Below Water Systems: One-Part Products
These systems provide a good level of protection.
How Much AntiFouling Paint Do I Need?
Determining how much antifouling you will need is fairly simple. You can calculate the area to paint by multiplying the length of your hull (LOA) by the beam and multiply by 0.85 (LOA x B x 0.85 = Area). Then divide the area by the coverage of the paint you've chosen to determine how many quarts per coat you will need.
Refer to the reference chart below for another quick estimate of how much antifouling paint is required for two coats.