Trolling for fish no longer means sitting on the transom for hours on end, leaning back to hold onto the trolling motor tiller. Remote-Troll lets you steer from anywhere in the boat.
Rated 10 out of 10 by North American Fishing Club!
The Remote-Troll is a remotely steerable mounting bracket for your gas-powered trolling motor. It works with trolling motors up to 10hp (four-stroke) or 15hp (two-stroke) and allows boat owners to be fishermen rather than “designated drivers”.
Mount the Remote-Troll to your swim platform with four bolts (included) and attach your long- or short-shaft motor. Tilt the motor up to 90 degrees (manually) when not in use. Use in either fresh or salt water.
Steer your boat using the comfortable one-finger switch and 20’ cord. Powered by your boat’s 12-volt battery, the Remote-Troll draws only 3 amps, and can be used all day without draining your battery. Spend your time fishing, not steering.
Which Is the Right Bracket?
- Short Shaft Trolling Motor
- Compact or Top Mount- Up to 5" to water*
- Flush Mount- 5-8" to water*
- 3" Drop Mount- 8-10" to water*
- 6" Drop Mount- 10-13" to water*
- Custom Bracket- More than 13" to water*
- Long Shaft Trolling Motor
- Compact or Top Mount- Up to 10" to water*
- Flush Mount- 10-13" to water*
- 3" Drop Mount- 13-15" to water*
- 6" Drop Mount- 15-18" to water*
- Custom Bracket- More than 18" to water*
* Distance to water is measured from the top of the swim platform.
White -- powder-coated aircraft aluminum.
Silver -- powder-coated aircraft aluminum.
Other sizes are also available as well as transom mounts for boats without swim platforms.
 |
Top Mount- white - Remote-Troll
Part # RT-300-TOP-W
Top Mount-whiteRT-200
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in white.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
|
 |
Top Mount- silver - Remote-Troll
Part # RT-300-TOP-S
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in silver.
The RT-300 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
|
 |
6" Drop Mount- white - Remote-Troll
Part # RT-300-DM6-W
6" Drop Mount- White
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
|
 |
6" Drop Mount- silver - Remote-Troll
(representative photo)
Part # RT-300-DM6-S
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
|
 |
3" Drop Mount- white - Remote-Troll
Part # RT-300-DM3-W
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
|
 |
3" Drop Mount- silver - Remote-Troll
Representative Photo
Part # RT-300-DM3-S
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
|
 |
Flush Mount- white - Remote-Troll
Part # RT-300-FM-W
Flush Mount- White
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
|
 |
Flush Mount- silver - Remote-Troll
Part # RT-300-FM-S
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
|
 |
RT-75 Compact- white - Remote-Troll
Part # RT-85-W
Built with the same lasting quality as the RT-200, the RT-75 Compact fits boats with swim platforms that are fairly close to the water (where the top of the platform is 5” or less from the water if using a short-shaft trolling motor, or 10” or less if using a long-shaft trolling motor). For these boats, fisherman have a choice between the RT-75 Compact or the RT-300-TOP (Top mount). The RT-85 Compact does not use brackets, and the entire unit is permanently attached to the swim platform. The advantage of the RT-300-TOP is that is removable, leaving just the brackets in place, for a day of skiing where you won’t be using the trolling motor. The advantage of the RT-85 Compact is that it brings the trolling motor about 8” closer to the boat.
|
 |
RT-85 Compact- silver - Remote-Troll
Part # RT-85-S
Built with the same lasting quality as the RT-300, the RT-85 Compact fits boats with swim platforms that are fairly close to the water (where the top of the platform is 5” or less from the water if using a short-shaft trolling motor, or 10” or less if using a long-shaft trolling motor). For these boats, fisherman have a choice between the RT-85 Compact or the RT-300-TOP (Top mount). The RT-85 Compact does not use brackets, and the entire unit is permanently attached to the swim platform. The advantage of the RT-300-TOP is that is removable, leaving just the brackets in place, for a day of skiing where you won’t be using the trolling motor. The advantage of the RT-85 Compact is that it brings the trolling motor about 8” closer to the boat.
|
No Review for Top Mount- white - Remote-Troll
No Review for Top Mount- silver - Remote-Troll
No Review for 6" Drop Mount- white - Remote-Troll
No Review for 6" Drop Mount- silver - Remote-Troll
No Review for 3" Drop Mount- white - Remote-Troll
No Review for 3" Drop Mount- silver - Remote-Troll
No Review for Flush Mount- white - Remote-Troll
No Review for Flush Mount- silver - Remote-Troll
No Review for RT-75 Compact- white - Remote-Troll
No Review for RT-85 Compact- silver - Remote-Troll
This product ships in 3 business days.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
Standard Shipping Policies
|
