Trolling for fish no longer means sitting on the transom for hours on end, leaning back to hold onto the trolling motor tiller. Remote-Troll lets you steer from anywhere in the boat.
Rated 10 out of 10 by North American Fishing Club!
The Remote-Troll is a remotely steerable mounting bracket for your gas-powered trolling motor. It works with trolling motors up to 10hp (four-stroke) or 15hp (two-stroke) and allows boat owners to be fishermen rather than “designated drivers”.
Mount the Remote-Troll to your swim platform with four bolts (included) and attach your long- or short-shaft motor. Tilt the motor up to 90 degrees (manually) when not in use. Use in either fresh or salt water.
Steer your boat using the comfortable one-finger switch and 20’ cord. Powered by your boat’s 12-volt battery, the Remote-Troll draws only 3 amps, and can be used all day without draining your battery. Spend your time fishing, not steering.
Which Is the Right Bracket?
Short Shaft Trolling Motor
Compact or Top Mount- Up to 5" to water*
Flush Mount- 5-8" to water*
3" Drop Mount- 8-10" to water*
6" Drop Mount- 10-13" to water*
Custom Bracket- More than 13" to water*
Long Shaft Trolling Motor
Compact or Top Mount- Up to 10" to water*
Flush Mount- 10-13" to water*
3" Drop Mount- 13-15" to water*
6" Drop Mount- 15-18" to water*
Custom Bracket- More than 18" to water*
* Distance to water is measured from the top of the swim platform.
White -- powder-coated aircraft aluminum.
Silver -- powder-coated aircraft aluminum.
Other sizes are also available as well as transom mounts for boats without swim platforms.
Top Mount- white
Part # RT-300-Top-W Top Mount-white
RT-200
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in white.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
Top Mount- silver
Part # RT-300-Top-S
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in silver.
The RT-300 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
6" Drop Mount- white
Part # RT-300-DM6-W 6" Drop Mount- White
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
6" Drop Mount- silver
Part # RT-300-DM6-S
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
3" Drop Mount- white
Part # RT-300-DM3-W
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
3" Drop Mount- silver
Part # RT-300-DM3-S
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
Flush Mount- white
Part # RT-300-FM-W Flush Mount- White
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
Flush Mount- silver
Part # RT-300-FM-S
Built with quality and durability in mind, the Remote-Troll RT-200 is made with powder-coated aluminum, which is cut by a computer-controlled water-jet cutter. The parts are then robotically welded, and powder coated in either white or silver.
The RT-200 fits onto a bracket (which we supply) that is permanently attached to your boat. By undoing just two bolts it is easily removed for maintenance or a day of water skiing. The various brackets fit nearly every type of boat, whether they have a swim platform or not.
The RT-200 is run by a small 12-volt electric motor, which draws only 3 amps, so no separate battery is required. Remote-Trolls come complete with the bracket appropriate for your boat, plugs, stainless steel mounting hardware, and a control switch with 20’ cord. Everything is warranted for one year.
RT-75 Compact- white
Part # RT-85-W Built with the same lasting quality as the RT-200, the RT-75 Compact fits boats with swim platforms that are fairly close to the water (where the top of the platform is 5” or less from the water if using a short-shaft trolling motor, or 10” or less if using a long-shaft trolling motor). For these boats, fisherman have a choice between the RT-75 Compact or the RT-300-TOP (Top mount). The RT-85 Compact does not use brackets, and the entire unit is permanently attached to the swim platform. The advantage of the RT-300-TOP is that is removable, leaving just the brackets in place, for a day of skiing where you won’t be using the trolling motor. The advantage of the RT-85 Compact is that it brings the trolling motor about 8” closer to the boat.
RT-85 Compact- silver
Part # RT-85-S Built with the same lasting quality as the RT-300, the RT-85 Compact fits boats with swim platforms that are fairly close to the water (where the top of the platform is 5” or less from the water if using a short-shaft trolling motor, or 10” or less if using a long-shaft trolling motor). For these boats, fisherman have a choice between the RT-85 Compact or the RT-300-TOP (Top mount). The RT-85 Compact does not use brackets, and the entire unit is permanently attached to the swim platform. The advantage of the RT-300-TOP is that is removable, leaving just the brackets in place, for a day of skiing where you won’t be using the trolling motor. The advantage of the RT-85 Compact is that it brings the trolling motor about 8” closer to the boat.
This product typically leaves our warehouse in 3 business days.
To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.
General Policy
We work hard to provide you with the best value in product prices and shipping charges, and to get your order to you in a timely, safe, and convenient manner. Internet sales involve the cost of getting the product to you, and shipping carriers base that cost on the size and weight of the package, plus the distance the package travels from our warehouse to your door. We keep our product prices low, negotiate low shipping charges from our carriers and pass those savings on to you, and we don't charge sales tax (except for residents of Utah), so your order from iboats.com is the best value for all your boating needs.
Our standard shipping method is UPS ground, which typically takes 2-5 additional transit days after the order has left our warehouse, depending on your delivery address. We also offer other shipping options, including expedited delivery, and the actual delivery date will depend on the shipping options you choose.
Shipping to Canada
Most products sold by iboats.com can be purchased and shipped to Canada. Some restrictions apply to certain items, such as hazardous materials, over-weight products, and the method of shipping. Available product lines, shipping rates and fees may vary depending on the delivery address for your order.
Currently, iboats.com offers ground shipping to all Canada provinces. Our Canadian brokerage service accelerates your orders through the Customs clearance process and facilitates the delivery of your order through Canada Post or the best method based on your shipping address. We do not currently offer expedited shipping methods to Canada.
At iboats.com we want to simplify your transaction and give you a pleasing purchasing experience so you'll come shop with us again and again. We therefore calculate all the duties, taxes, and other fees specific to Canadian orders and show you the total landed cost of getting the order to your door. There are no hidden fees and will be no surprise COD charges when the package is delivered to you.
Order History & Tracking
We provide several methods to track your order and keep you informed of your order status and expected delivery date. After completing an iboats.com purchase transaction, an account will automatically be created for your provided email address. You'll receive an email from iboats.com Customer Service informing you of your new User Account and the many benefits it provides. If you don't wish to have an iboats.com Account with password, do nothing and your account won't be registered; however, you can respond to the instructions in the email and easily register your account and setup a password. This will allow you to sign in to your account by choosing the Order Status link from any iboats.com page, where you can browse your order history and track the status of all your orders - tracking numbers are displayed that link to the delivery carrier's tracking webpage.
If you have provided your email address during checkout, we will also email you your invoice, which includes a link for tracking your order and viewing the current status of your order. Refer to your invoice email and tracking link any time you wish to track the status of your order
Friendly Return Policy
If the merchandise you received was defective, damaged, or an error was made by iboats.com, simply return the merchandise within 30 days of the original shipping date for a full refund.
See the specific requirements and instructions below for United States or Canadian orders.
Returns for U.S. Customers
We want to make it as easy as possible for you to return an unwanted item; after all, we want you to return again and again as a satisfied iboats.com customer, and to also continue recommending us to your friends.
As mentioned above, if the merchandise you received was defective, damaged, or an error was made by iboats.com, simply return the merchandise within 30 days of the original shipping date for a full refund. Merchandise must still be in brand-new, unused condition with all original packaging in good condition; plus parts, accessories, manuals, and/or warranty cards included. Please note that all return merchandise must be accompanied by an RA (Return Authorization) number issued by iboats.com. To receive your RA number simply call our Returns Department toll-free at 1-800-914-1123 or email us at returns@iboats.com.
If for some reason you need to return merchandise for reasons other than those mentioned above, follow the same procedures, obtaining an RA number from iboats.com, within 30 days of the original shipping date. Please note that there may be restocking fees, shipping costs, or product change order costs associated with some returns. Feel free to check with the iboats.com Returns Department for specific terms, conditions, and eligibility.
Returns for Canadian Customers
We request that all Canadian customers verify and re-check that the products you are ordering are what you want and are correct for your application or intended use. iboats.com does not accept any return merchandise on Canadian orders, unless the merchandise you received was defective, damaged, or an error was made by iboats.com. In such cases, return the merchandise within 30 days of the original shipping date for a full refund, following the procedures below.
Canadian orders involve many additional costs dealing with Customs, Provincial taxes, brokerage fees, and more, making product returns complicated and very expensive and costly for both the customer and iboats.com. Again, help us serve you best by verifying that the products you are ordering are what you want so we don't have any costly returns or have to deny a return.
If a return meets the criteria mentioned above, merchandise must still be in brand-new, unused condition with all original packaging in good condition; all parts, accessories, manuals, and/or warranty cards included. Please note that all return merchandise must be accompanied by an RA (Return Authorization) number issued by iboats.com. To receive your RA number call our Customer Service Department toll-free at 1-800-914-1123, Tuesday-Friday, 10am-7pm EST, or email us at returns@iboats.com. We will provide further details on where and how to mail the merchandise. Please note that returns sent from rural Canadian addresses may take up to five weeks to process after the package is mailed.
