Seadog Line
Round Fuse Holder with Flush Cap SeaDog Line
Price: $2.68
Save: $1.17
(30% Off $3.85)
Part # 420504-1
2nd Day Air for $2.99 More Eligible
SHIPS TOMORROW!* if ordered in 16 hrs 3 mins.
No Reviews
Spade terminal, Stamped Brass / Molded Bakelite construction. 12V 15Amp
Will it fit 1/4 inch panel ?
This fuse holder goes to the SeaDog's bilge alarms only.

I bought 9 fuse holders that are 5/8 drill bit or bigger, and threads not long enough to tighten up to panel . I need a diameter of 1/2"( to not have to red till holes in teak wood , and thread length of 5/8" what do you suggest? 3ag fuse size rating 15/20amp. Also I have spade connector adapters that have a single spade on end going to fuse holder(female), and two on end going out to device in boat. (Some have 3 male spade ends going out to devices, like nav lights) do you have these too?
This has a 1/2" diameter. Thread length is only 3/8" however. We will not have a thread length in 5/8" unfortunately. The next closest we would have is 5020 from Blue Sea Systems where the mounting hole is 1/2" and the thread length is .55". As for the spade connectors we do not pull up what you're describing. If you would like call us at the number at the top of the page with some info or possibly photo's to send, we can most likely point you in the right direction.

The spade type connectors that I can find are to wide for fuse holder. Where can I get Spade type connectors for these fuse holders 14 gauge wite ?
You should be able to get some locally. These fuse holders have a standard 1/4" push-on terminal. So the spade connectors will need to be that same size.

Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies