I bought 9 fuse holders that are 5/8 drill bit or bigger, and threads not long enough to tighten up to panel . I need a diameter of 1/2"( to not have to red till holes in teak wood , and thread length of 5/8" what do you suggest? 3ag fuse size rating 15/20amp. Also I have spade connector adapters that have a single spade on end going to fuse holder(female), and two on end going out to device in boat. (Some have 3 male spade ends going out to devices, like nav lights) do you have these too?
This has a 1/2" diameter. Thread length is only 3/8" however. We will not have a thread length in 5/8" unfortunately. The next closest we would have is 5020 from Blue Sea Systems where the mounting hole is 1/2" and the thread length is .55". As for the spade connectors we do not pull up what you're describing. If you would like call us at the number at the top of the page with some info or possibly photo's to send, we can most likely point you in the right direction.