Rule Automatic Bilge Pump 800 GPH 3/4" Port 12v

Rule Automatic Bilge Pump 800 GPH 3/4" Port 12v
Your Price: $79.05
Save: $40.94
(34% Off $119.99)
Part # 20RS ValueShip™ Eligible
SHIPS TODAY!* if ordered in 8 hrs 44 mins.
Rule

Product Families

Rule Automatic Bilge-Pump 500 - 3700 GPH 12v
    Rule Pumps 12 Volt DC Automatic Bilge Pumps 500 GPH - 2000 GPH feature computerized operation on the principle of impeller resistance. Float switches …
    Rule 800
    Automatic Round 12v

    Rule Automatic bilge pumps eliminate the need for a separate float switch to activate the pump. Once power is supplied, starting and stopping is completely automatic. The pump checks for water every 2 + minutes by turning on for a second and measuring load against the impeller. If water is present, the pump remains on until the water is removed. Thereafter the pump resumes its 2-1/2 minute check cycle. The automatic pumps feature two positive leads: an automatic (brown) and a manual override (brown with a white stripe).
    Based On 4 Reviews | Write Review
    very good product
    by Michael from Willoughby, Ohio on June 10, 2014
    easy to install
    Was this review helpful?
    Rule Automatic Bilge Pump 800 GPH 3/4" Port 12v
    by David from New Johnsonville, Tennessee on July 05, 2013
    Works great! Unfortunately I had to find out when I neglected to insert the drain plug!
    (2 of 2 people found this review helpful)
    Was this review helpful?
    Works great!
    by Anthony from South san Francisco, California on June 12, 2013
    Works as it is suppose to (constant ck every couple minutes, manual on or off - attached to a 3-way toggle switch). Easy installation. Great safety feature for my boat.
    Was this review helpful?
    Rule Auto Bilge Pump
    by Steve from Fremont, California on September 22, 2012
    I had a manual bilge in my boat and wanted an automatic one. I installed this Rule 800 GPM bilge. It has wiring for auto and manual over-ride which was a feature I wanted. I debated at first whether to add a 3 position switch, but opted to just connect the auto wire direct to the battery through a fuse since I have a battery on/off switch. This bilge automatically runs a 1-2 second test where it briefly switches on to measure resistance (presence of water in the bilge changes this resistance activating the pump). This self test runs every few minutes so you definitely need a way to shut it off when the boat is not in the water.
    Was this review helpful?
    Ask a question for
    Question & Answer Guidelines
    This product ships in 1 business day.

    Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
    * Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
    Standard Shipping Policies