Rule - Marine Plumbing Systems

	Rule 3" In-Line Blower Part # 140 In-Line Bilge Blower Rule in-line blowers provide ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housing for long life. Compact and easily installed on any flat surface. Rule in-line blowers provide higher air flow, lower amp draw and quieter operation than standard blowers. Features: Efficient high volume air flow Quiet operation Low amp draw Slip on inlet and outlet ducting connections Sealed motor shaft for moisture protection Corrosion resistant nikel plated motor housing ABYC-H2 ISO 9097:8846 IMCI (CE) N.M.M.A. type accepted USCG 183.410 Compliant, Ignition protected
	Rule 4" In-Line Blower Part # 240 In-Line Bilge Blower Rule in-line blowers provide ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housing for long life. Compact and easily installed on any flat surface. Rule in-line blowers provide higher air flow, lower amp draw and quieter operation than standard blowers. Features: Efficient high volume air flow Quiet operation Low amp draw Slip on inlet and outlet ducting connections Sealed motor shaft for moisture protection Corrosion resistant nikel plated motor housing ABYC-H2 ISO 9097:8846 IMCI (CE) N.M.M.A. type accepted USCG 183.410 Compliant, Ignition protected
	Rule Deluxe 3-Way Panel Lighted Switch Part # 41 3-Way Panel Lighted Switch Controls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a "fail safe" spring return to "off" from the "manual" position. Panel is black stainless steel and has red indicator light and fuse holder.
	Rule Deluxe 3-Way Lighted Rocker Panel Switch Part # 43 3-Way Lighted Rocker Panel Switch Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.
	Rule ECO-Switch Automatic Bilge Pump Switch Part # 39 ECO-Switch The Rule ECO-Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to switch. This air pressure activates the switch which controls your pump. There are no moving internal parts, all wiring is out of the water, and there are no submerged electrical connections at all. Offering complete reliability and outstanding performance, the Rule ECO-Switch offers a viable alternative to traditional float switches.
	Rule Hi-Water Bilge Alarm Part # 33ALA Hi-Water Bilge Alarm The High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm. This unit allows an unmanned com part ment to be constantly monitored. For additional compartments add additional Rule Float Switches. Complies with CFR 182.530 which requires a visual and audible alarm in each unmanned space on commercial vessels at least 26' (7.9m) in length.
	Rule 1000 G.P.H Bilge Pump Part # 20A Rule 1000 The Rule 1000 is in a class by itself and is a popular choice among boatbuilders and boat owners alike. 36 mounting variations and a gas resistant strainer base make this one of Rule's most popular pumps. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Fully submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boat builders worldwide Marine grade blocked wiring
	Rule 1100 G.P.H. Automatic Bilge Pump Part # 27S Rule 1100 The Rule 1100 offers impressive pumping power for its size and cost. Competitive models in this pumping range are much larger and far more expensive. 12 Volts DC unless noted. FEATURES Computerized operation - no float switch required Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 1100 G.P.H Bilge Pump - Non Automatic Part # 27D Rule 1100 The Rule 1100 offers impressive pumping power for its size and cost. Competitive models in this pumping range are much larger and far more expensive. 12 Volts DC unless noted. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 1500 G.P.H. "Gold Series" Bilge Pump Part # 04 Rule 1500 High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protetion Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and corrosion protection Used by leading boatbuilders worldwide Marine grade blocked wiring
	Rule 1500 G.P.H. Automatic Bilge Pump Part # 51S Rule 1500 High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Computerized operation - no float switch required 3 wire version allows manual override or indicator light capability Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 1500 G.P.H. Bilge Pump Part # 02 Rule 1500 High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protetion Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and corrosion protection Used by leading boatbuilders worldwide Marine grade blocked wiring
	Rule 2000 G.P.H. "Gold Series" Bilger Pump Part # 09 Rule 2000 Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean triple stage snap lock strainer Silent and vibrationless operatioin Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 2000 G.P.H. Automatic Bilge Pump Part # 53S Rule 2000 Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Computerized operation - no float switch required Fully Submersible Easy clean triple stage snap lock strainer Silent and vibrationless operatioin Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 2000 G.P.H. Bilge Pump Part # 10 Rule 2000 Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 360 G.P.H. Bilge Pump Part # 24 Rule 360 The Rule 360 provides outstanding quality and value. It is economically priced and designed for small boats. 3/4" (19mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 360 G.P.H. Bilge Pump w/ Rule-A-Matic® Float Switch Part # 24-35A Rule 360 The Rule 360 provides outstanding quality and value. It is economically priced and designed for small boats. 3/4" (19mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out Rule-A-Matic® Float Switch Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire.
	Rule 3700 G.P.H. "Gold Series" Bilge Pump Part # 13A Rule 3700 Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 3700 G.P.H General Purpose Centrifugal Pump Part # 17A General Purpose Centrifugal Pump End Suction Centrifugal Pump The Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy duty construction for use on commercial or pleasure boats. 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers lots of water but at low pressure. 12 volts DC unless noted.
	Rule 3700 G.P.H. Bilge Pump Part # 14A Rule 3700 Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 500 G.P.H. Automatic Bilge Pump Part # 25S Rule 500 The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. 3/4" (19mm) discharge outlet. 12 Volts DC unless noted. Features: Computerized operation - no floats switch required Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 500 G.P.H. Bilge Pump Part # 25D Rule 500 The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. 3/4" (19mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 500 G.P.H. Bilge Pump w/ Rule-A-Matic® Plus™ Float Switch Part # 25-40A Rule 500 w/ Rule-A-Matic® Plus™ Float Switch The Rule 500 offers many design features while keeping size and cost to a minimum. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. 3/4" (19mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring Rule-A-Matic® Plus™ Float Switch Sleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover, which protects against debris and jamming. 14 gauge highly abrasive resistant marine grade wire, and a built-in test feature. Designed for pumps drawing up to 20 Amps now includes a 2 year warranty.
	Rule 800 G.P.H. Round Bilge Pump Part # 20R Rule 800 Features: Gas resistant strainer base 3/4" discharge outlet Fully submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule 800 G.P.H. Square Bilge Pump Part # 20F Rule 800 Features: Gas resistant strainer base 3/4" discharge outlet Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring
	Rule-A-Matic® Plus™ Float Switch Part # 40A Rule-A-Matic® Plus™ Float Switch Sleek and rugged, the Rule-A-Matic Plus float switch has a strong, fully integrated, impact resistant cover, which protects against debris and jamming. 14 gauge highly abrasive resistant marine grade wire, and a built-in test feature. Designed for pumps drawing upt to 20 Amps Model 40A and 40FA now includes a 2 year warranty.
	Rule-A-Matic® Float Switch Part # 35A Rule-A-Matic® Float Switch Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 Amps. Now includes a 2 year warranty.
	Rule-A-Matic® Float Switch w/ Fuse Holder Part # 35FA Rule-A-Matic® Float Switch w/ Fuse Holder Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 Amps. Now includes a 2 year warranty.
	Rule-Mate® 1100 Automatic Bilge Pump Part # RM1100A Rule-Mate® 1100 Fully Automated Bilge Pump Rule introduces the rule-mate™ series of bilge pumps. The rule-mate consists of a powerful rule bilge pump and a new non-mecury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pump's internal computer senses no load (Water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bigle pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.
	Rule-Mate® 1500 G.P.H. Automatic Bilge Pump Part # RM1500 Rule-Mate® 1500 High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Fully Automated Bilge Pump Rule introduces the rule-mate™ series of bilge pumps. The rule-mate consists of a powerful rule bilge pump and a new non-mecury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pump's internal computer senses no load (Water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bigle pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.
	Rule-Mate® 2000 G.P.H. Automatic Bilge Pump Part # RM2000 Rule-Mate® 2000 Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted. Fully Automated Bilge Pump Rule introduces the rule-mate™ series of bilge pumps. The rule-mate consists of a powerful rule bilge pump and a new non-mecury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pump's internal computer senses no load (Water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bigle pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.
	Rule-Mate® 500 Automatic Bilge Pump Part # RM500A Rule-Mate® 500 Fully Automated Bilge Pump Rule introduces the rule-mate™ series of bilge pumps. The rule-mate consists of a powerful rule bilge pump and a new non-mecury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pump's internal computer senses no load (Water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bigle pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.
	Rule-Mate® 750 Automatic Bilge Pump Part # RM750A Rule-Mate® 750 Fully Automated Bilge Pump Rule introduces the rule-mate™ series of bilge pumps. The rule-mate consists of a powerful rule bilge pump and a new non-mecury float switch in a single housing. While fully automated, the pump will only turn on when the water level rises. There is no cycling and battery drain. The pump remains off until the internal float switch rises. The pump then stays on until the water is evacuated. The pump's internal computer senses no load (Water) against the impeller and then shuts off. A detachable strainer provides easy access to the impeller area for removal of debris. Each pump is easily installed with the pump and switch internally wired. A third wire allows the pump to be connected to a manual override switch if so desired. The rule-mate bigle pump is thoughtfully designed, and due to its compact profile, can be used in practically all bilge pumping applications.
	Rule 800 G.P.H. Shower Drain Kit w/ Multi-Port Inlet Part # 98A Shower Drain System A compact, full capacity shower drain system. Automatically turns on after the water starts, and shuts off when the water is removed. Activated by a Rule-A-Matic float switch. Three inlet ports which offer varying combinations of inlet hose. Other features include a clear screw down cover, a removable strainer for easy cleaning, and an internal check valve to prevent back flow.
	Rule Stainless Steel Debris Strainer Part # 70 Stainless Steel Debris Strainer Extra measure of protection for use on round based Rule pumps up to 3700 GPH (14010 LPH). Installs directly into existing strainer. Filters out excess debris and helps prevent jamming and failure.
	Rule SuperSwitch® Float Switch Part # 37A SuperSwitch™ Float Switch Now backed by a 5 year warranty, the non-mercury SuperSwitch is designed for the toughest applications. Design includes marine grade 14 gauge blocked wire, larger float for increased buoyancy, removable base for easy servicing and a snap switch design capable of handling pumps drawing up to 20 Amps.
	Rule SuperSwitch™ Float Switch Part # 37FA SuperSwitch™ Float Switch w/ Fuse Holder Now backed by a 5 year warranty, the non-mercury SuperSwitch is designed for the toughest applications. Design includes marine grade 14 gauge blocked wire, larger float for increased buoyancy, removable base for easy servicing and a snap switch design capable of handling pumps drawing up to 20 Amps.
	Rule "STC" Series Tournament Series™ 500 G.P.H. Livewell Pump Part # 403STC Rule 800 "STC" Series Tournament Series™ Straight Inlet Thru-Hull Fitting This new pump is built on Rule's unsurpassed quality and leadership in pump design and technology. The innovatic design includes many new and exciting features including a quick, on hand "push button" motor cartridge removal system, patented rotatable base that allows you to position the discharge nozzle at any location and threaded nylon hose barb attachments which allow for various hose mounting options. Other features include a built-in dual port option, water-cooled housing, and positive snap motor cartridge locking mechanism.
	Rule "STC" Series Tournament Series™ 500 G.P.H. Livewell Pump Part # 405STC Rule 1100 "STC" Series Tournament Series™ Straight Inlet Thru-Hull Fitting This new pump is built on Rule's unsurpassed quality and leadership in pump design and technology. The innovatic design includes many new and exciting features including a quick, on hand "push button" motor cartridge removal system, patented rotatable base that allows you to position the discharge nozzle at any location and threaded nylon hose barb attachments which allow for various hose mounting options. Other features include a built-in dual port option, water-cooled housing, and positive snap motor cartridge locking mechanism.
	Rule "STC" Series Tournament Series™ 500 G.P.H. Livewell Pump Part # 401STC Rule 500 "STC" Series Tournament Series™ Straight Inlet Thru-Hull Fitting This new pump is built on Rule's unsurpassed quality and leadership in pump design and technology. The innovatic design includes many new and exciting features including a quick, on hand "push button" motor cartridge removal system, patented rotatable base that allows you to position the discharge nozzle at any location and threaded nylon hose barb attachments which allow for various hose mounting options. Other features include a built-in dual port option, water-cooled housing, and positive snap motor cartridge locking mechanism.
	Rule Side Mount Bracket Part # 99 Side Mount Bracket Permits small Rule bilge pumps to be side mounted to a vertical stringer, a bulkhead or a transom. Use this bracket when bottom mounting is inconvenient or impossible. Simply remove the strainer from the pump, put the bracket in place, and reassemble. For flow rates 500 - 1100 gph
	Rule 1800 Pool Cover Pump w/ Leaf Protector - 24' Cord Part # H53SP-24 Pool Cover Pump w/ Leaf Protector The finest pool cover pump ever designed. Features a powerful 110 volt 1800 GPH automatic submersible pump with a specifically designed strainer base that filters out leaves and debris. Installs easily with garden hose.

No Review for Rule 3" In-Line Blower

Be the first to Write a Review

No Review for Rule 4" In-Line Blower

Be the first to Write a Review

No Review for Rule Deluxe 3-Way Panel Lighted Switch

Be the first to Write a Review

No Review for Rule Deluxe 3-Way Lighted Rocker Panel Switch

Be the first to Write a Review

No Review for Rule ECO-Switch Automatic Bilge Pump Switch

Be the first to Write a Review

No Review for Rule Hi-Water Bilge Alarm

Be the first to Write a Review

No Review for Rule 1000 G.P.H Bilge Pump

Be the first to Write a Review

No Review for Rule 1100 G.P.H. Automatic Bilge Pump

Be the first to Write a Review

No Review for Rule 1100 G.P.H Bilge Pump - Non Automatic

Be the first to Write a Review

No Review for Rule 1500 G.P.H. "Gold Series" Bilge Pump

Be the first to Write a Review

No Review for Rule 1500 G.P.H. Automatic Bilge Pump

Be the first to Write a Review

No Review for Rule 1500 G.P.H. Bilge Pump

Be the first to Write a Review

No Review for Rule 2000 G.P.H. "Gold Series" Bilger Pump

Be the first to Write a Review

No Review for Rule 2000 G.P.H. Automatic Bilge Pump

Be the first to Write a Review

No Review for Rule 2000 G.P.H. Bilge Pump

Be the first to Write a Review

No Review for Rule 360 G.P.H. Bilge Pump

Be the first to Write a Review

No Review for Rule 360 G.P.H. Bilge Pump w/ Rule-A-Matic® Float Switch

Be the first to Write a Review

No Review for Rule 3700 G.P.H. "Gold Series" Bilge Pump

Be the first to Write a Review

No Review for Rule 3700 G.P.H General Purpose Centrifugal Pump

Be the first to Write a Review

No Review for Rule 3700 G.P.H. Bilge Pump

Be the first to Write a Review

No Review for Rule 500 G.P.H. Automatic Bilge Pump

Be the first to Write a Review

No Review for Rule 500 G.P.H. Bilge Pump

Be the first to Write a Review

No Review for Rule 500 G.P.H. Bilge Pump w/ Rule-A-Matic® Plus™ Float Switch

Be the first to Write a Review

No Review for Rule 800 G.P.H. Round Bilge Pump

Be the first to Write a Review

No Review for Rule 800 G.P.H. Square Bilge Pump

Be the first to Write a Review

No Review for Rule-A-Matic® Plus™ Float Switch

Be the first to Write a Review

No Review for Rule-A-Matic® Float Switch

Be the first to Write a Review

No Review for Rule-A-Matic® Float Switch w/ Fuse Holder

Be the first to Write a Review

No Review for Rule-Mate® 1100 Automatic Bilge Pump

Be the first to Write a Review

No Review for Rule-Mate® 1500 G.P.H. Automatic Bilge Pump

Be the first to Write a Review

No Review for Rule-Mate® 2000 G.P.H. Automatic Bilge Pump

Be the first to Write a Review

No Review for Rule-Mate® 500 Automatic Bilge Pump

Be the first to Write a Review

No Review for Rule-Mate® 750 Automatic Bilge Pump

Be the first to Write a Review

No Review for Rule 800 G.P.H. Shower Drain Kit w/ Multi-Port Inlet

Be the first to Write a Review

No Review for Rule Stainless Steel Debris Strainer

Be the first to Write a Review

No Review for Rule SuperSwitch® Float Switch

Be the first to Write a Review

No Review for Rule SuperSwitch™ Float Switch

Be the first to Write a Review

No Review for Rule "STC" Series Tournament Series™ 500 G.P.H. Livewell Pump

Be the first to Write a Review

No Review for Rule "STC" Series Tournament Series™ 500 G.P.H. Livewell Pump

Be the first to Write a Review

No Review for Rule "STC" Series Tournament Series™ 500 G.P.H. Livewell Pump

Be the first to Write a Review

No Review for Rule Side Mount Bracket

Be the first to Write a Review

No Review for Rule 1800 Pool Cover Pump w/ Leaf Protector - 24' Cord

Be the first to Write a Review

This product typically leaves our warehouse in 1 business day.

To determine the shipping cost and estimated delivery date for this item click Add to Cart, then click Calculate Shipping inside your shopping cart.

General Policy

We work hard to provide you with the best value in product prices and shipping charges, and to get your order to you in a timely, safe, and convenient manner. Internet sales involve the cost of getting the product to you, and shipping carriers base that cost on the size and weight of the package, plus the distance the package travels from our warehouse to your door. We keep our product prices low, negotiate low shipping charges from our carriers and pass those savings on to you, and we don't charge sales tax (except for residents of Utah), so your order from iboats.com is the best value for all your boating needs.

Our standard shipping method is UPS ground, which typically takes 2-5 additional transit days after the order has left our warehouse, depending on your delivery address. We also offer other shipping options, including expedited delivery, and the actual delivery date will depend on the shipping options you choose.

Shipping to Canada

Most products sold by iboats.com can be purchased and shipped to Canada. Some restrictions apply to certain items, such as hazardous materials, over-weight products, and the method of shipping. Available product lines, shipping rates and fees may vary depending on the delivery address for your order.

Currently, iboats.com offers ground shipping to all Canada provinces. Our Canadian brokerage service accelerates your orders through the Customs clearance process and facilitates the delivery of your order through Canada Post or the best method based on your shipping address. We do not currently offer expedited shipping methods to Canada.

At iboats.com we want to simplify your transaction and give you a pleasing purchasing experience so you'll come shop with us again and again. We therefore calculate all the duties, taxes, and other fees specific to Canadian orders and show you the total landed cost of getting the order to your door. There are no hidden fees and will be no surprise COD charges when the package is delivered to you.

Order History & Tracking

We provide several methods to track your order and keep you informed of your order status and expected delivery date. After completing an iboats.com purchase transaction, an account will automatically be created for your provided email address. You'll receive an email from iboats.com Customer Service informing you of your new User Account and the many benefits it provides. If you don't wish to have an iboats.com Account with password, do nothing and your account won't be registered; however, you can respond to the instructions in the email and easily register your account and setup a password. This will allow you to sign in to your account by choosing the Order Status link from any iboats.com page, where you can browse your order history and track the status of all your orders - tracking numbers are displayed that link to the delivery carrier's tracking webpage.

If you have provided your email address during checkout, we will also email you your invoice, which includes a link for tracking your order and viewing the current status of your order. Refer to your invoice email and tracking link any time you wish to track the status of your order

Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an iboats.com customer, and to also recommend us to your boating friends

Electronics/Software/Videos: Electronics/Software/Videos are not returnable. Please be careful when ordering to choose the correct product.

See our complete return policy.

iboats.com Low Price Guarantee – Quick and Simple

We have the best selection of products at the best prices, guaranteed.

Nobody beats our prices. If you find a current lower price on an identical, in-stock item from any nationally recognized marine Internet retailer, we will match the price. iboats.com works hard to bring you everyday low prices plus knowledgeable product advice, great in-stock selection, and outstanding customer service. Our guarantee covers it all, and if you’ve found a better price let us know and we’ll match it and work hard to make you a satisfied iboats customer for life.

Quick: Call 1-800-914-1123

Simple: Have the lower competitive price info ready, as outlined below.

Buy with Confidence – We Won’t Be Beat!

Here’s what you need to supply us to verify a lower price:

The retailer’s name and URL website address of where you found the lower price.
The product name, manufacturer, model number, price, and shipping charges.
Electronics products, trolling motors, and outboard engines are not available for price matching.

30-day Guarantee
Buy now with confidence, knowing that should there ever be a lower price from any nationally recognized U.S. marine Internet retailer for 30 days after your purchase, iboats will match that price and refund you the difference. Or we’ll match the price before your purchase. The price considered will be the advertised price plus shipping and handling charges.

Qualifying items must be verifiable on the Internet or through a current printed advertisement. Items must be identical, in-stock new products and not sold through a membership club or auction site or any of the following offers, such as free offers, multiple discounts like “buy one, get one at half off”, special orders, special bundles, clearance sales, mail-in rebate offers, typographical errors, private sales, non-retail websites, promo discounts, or limited-time offers. All price matching is at the discretion of iboats.com and is subject to change at any time. iboats reserves the right to limit quantities. Price-match products are not eligible for special offers or discounts.

iboats.com – The Leader in Price Buster Confidence!

Copyright © 1999- iboats, inc. All rights reserved iboats Home \| Boat Parts & Accessories \| Boat Covers \| Boat Propellers \| Boat Motors \| Boats for Sale \| New Boats \| Boat Forums Contact iboats \| Site Terms of Use \| Online Privacy Practices \| Legal Notices

Rule - Marine Plumbing Systems

Need Help? Have Questions?

Rule 3" In-Line Blower

Rule 4" In-Line Blower

Rule Deluxe 3-Way Panel Lighted Switch

Rule Deluxe 3-Way Lighted Rocker Panel Switch

Rule ECO-Switch Automatic Bilge Pump Switch

Rule Hi-Water Bilge Alarm

Rule 1000 G.P.H Bilge Pump

Rule 1100 G.P.H. Automatic Bilge Pump

Rule 1100 G.P.H Bilge Pump - Non Automatic

Rule 1500 G.P.H. "Gold Series" Bilge Pump

Rule 1500 G.P.H. Automatic Bilge Pump

Rule 1500 G.P.H. Bilge Pump

Rule 2000 G.P.H. "Gold Series" Bilger Pump

Rule 2000 G.P.H. Automatic Bilge Pump

Rule 2000 G.P.H. Bilge Pump

Rule 360 G.P.H. Bilge Pump

Rule 360 G.P.H. Bilge Pump w/ Rule-A-Matic® Float Switch

Rule 3700 G.P.H. "Gold Series" Bilge Pump

Rule 3700 G.P.H General Purpose Centrifugal Pump

Rule 3700 G.P.H. Bilge Pump

Rule 500 G.P.H. Automatic Bilge Pump

Rule 500 G.P.H. Bilge Pump

Rule 500 G.P.H. Bilge Pump w/ Rule-A-Matic® Plus™ Float Switch

Rule 800 G.P.H. Round Bilge Pump

Rule 800 G.P.H. Square Bilge Pump

Rule-A-Matic® Plus™ Float Switch

Rule-A-Matic® Float Switch

Rule-A-Matic® Float Switch w/ Fuse Holder

Rule-Mate® 1100 Automatic Bilge Pump

Rule-Mate® 1500 G.P.H. Automatic Bilge Pump

Rule-Mate® 2000 G.P.H. Automatic Bilge Pump

Rule-Mate® 500 Automatic Bilge Pump

Rule-Mate® 750 Automatic Bilge Pump

Rule 800 G.P.H. Shower Drain Kit w/ Multi-Port Inlet

Rule Stainless Steel Debris Strainer

Rule SuperSwitch® Float Switch

Rule SuperSwitch™ Float Switch

Rule "STC" Series Tournament Series™ 500 G.P.H. Livewell Pump

Rule "STC" Series Tournament Series™ 500 G.P.H. Livewell Pump

Rule "STC" Series Tournament Series™ 500 G.P.H. Livewell Pump

Rule Side Mount Bracket

Rule 1800 Pool Cover Pump w/ Leaf Protector - 24' Cord

General Policy

Shipping to Canada

Order History & Tracking

iboats.com Low Price Guarantee – Quick and Simple

Quick: Call 1-800-914-1123

Simple: Have the lower competitive price info ready, as outlined below.

Buy with Confidence – We Won’t Be Beat!

My iboats