FINAL DAYS for Labor Day Sale Savings! Upgrade to 2nd Day Air for only $2 more*

SE Sport 300 High Performance Hydrofoil for 40-350HP Motors, Black - Sport Marine

Sport Marine
SE Sport 300 High Performance Hydrofoil for 40-350HP Motors, Black - Sport Marine
Price Too Low to Show!
Add to Cart for Price
Part # 71614, List Price: $69.99 ValueShip™ Eligible
SHIPS TODAY!* if ordered in 2 hrs 43 mins.
This item is found in the following Product Families
Se Sport High Performance Hydrofoil
Se Sport High Performance Hydrofoil
Improve your boat’s performance by installing the SE Sport High Performance Hydrofoil. It features a crescent shaped surface that helps your …

  • High Performance Hydrofoils streamlined for speed in two sizes
  • The SE Sport will improve handling and provide better maneuverability with a smoother ride
  • Features Turbo Trac to enhance thrust and control
  • Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot
  • Cuts planing time dramatically and keeps the boat on plane at lower speeds
  • Features on piece, high strength copolymer construction
  • Stainless steel hardware included
  • Attaches to cavitation plate
  • Works for both outboards and sterndrives that have a cavitation plate larger than 5 inches wide, usually 40 horse power and up.The SE Sport 200 is recommended for cavitation plates 5 inches or less.
  • Many Honda outboards are made with a center cavitation plate ridge. Some Hondas will require a slight cut or bigger notch in the "yoke" area of the foil. This is necessary to give 1/2" spacing between the rear holes to be drilled and the end of the cavitation plate. Cutting a notch can easily be handled with a small saw or grinder and will not affect the durability or warranty of the SE Sport.
Full StarFull StarFull StarFull StarFull StarHydrofoil se sport 300
by Gareth from Fontana, California on August 28, 2015
Works great , glad I bought it ..
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarBest Add-on for the money
by Michael from Port Orchard, Washington on July 31, 2015
Overall I think this is the best thing I could have done to improve both efficiency and handling over all speed ranges. Have it mounted on a '79 Merc 800 (80hp) 2-stroke driving a 16' Fiberform runabout. Even easing the power up slowly the boat only pitches about 2/3rds of what it did originally, and at full power it just jumps right up on plane within a few seconds. Rough water handling has improved tremendously. Slow speed handling has improved also. The bow used to wander a lot. There is now far less wheel movement required to keep on course. The boat stays on plane at lower rpm's (to about 3100), but is also quite comfortable at 3800. Mileage has increased noticeably at speed. It's not pushing uphill nearly as much. I did not use the provided template for drilling the mounted holes. I put the hydrofoil where it needed to be and clamped to the cavitation plate. Then I used a drill the same size as the clearance holes to spot drill locations, just enough to leave a 1/4 inch or so diameter mark. Drill through 1/4 inch (or Ltrs -E- or -F-) diameter at those locations and mount it. Use the rubber washers between the cavitation plate and the hydrofoil. The thicker ones to the rear. Go ahead and get this one done. You will notice the difference immediately.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarSE sport 300 hydrofoil
by Jeffery.d from Nashville, Tennessee on June 09, 2015
The hydrofoil was thicker than other hydrofoils I have seen making it more durable. Helped my boat plane out at much lower speed, would recommend to anyone with planing issues!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star71614 SE Sport 300 High Performance Hydrofoil
by Kris from Ragley, Louisiana on October 02, 2014
I installed it on my Mercury 75hp, which is on a Sun Tracker fishing barge 20 pontoon boat. Works great, helps give the motor that extra lift it needs to get the boat out of the water. Love it.
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarWorks great, easy to install
by Ky from Kansas City, Missouri on August 07, 2014
This really helped reduce porpoising with my runabout. We mostly tube and ski so getting on plane faster is a high priority and this SE 300 hydrofoil helped with that. The install wasn't too difficult but I did have to remove the prop to drill holes for the bolts. Be sure to use a titanium drill bit for the holes.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarHydrofoil on 18' ProTracker
by Robert from Springfield, Tennessee on January 05, 2014
Was difficult to plane out without hitting higher speeds with my 60hp Merc but the hydrofoil helps it plane much quicker and maintain even at lower speeds. That's what I had hoped for. Didn't notice any change in steering or handling but that wasn't a problem anyway. Very satisfied with the product.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarWorks as Advertised
by Jason from Fairborn, Ohio on June 13, 2013
I purchased this at the beginning of the boating season for a newer boat we had just purchased. 1998 Bayliner open bow with 4.3l V6 engine. I had the boat out a few times prior to installing this hydrafoil. It plained out fine before but man what a diference with the hydrafoil. The boat gets on plane much faster now, like about 3 seconds. It is easier to manuver with skiers and tubers. I can't say the top end speed increased. The install was very easy. Took about 30 minutes. Just drilled the holes and installed. The template is helpful. I have had it out several times since. Some folks mentioned on here about losing their hydrafoil. They must have done something wrong when they installed it. Mine is showing no signs of comming off at all. not even a concern. Great product for the price. I will be adding some smart tabs next, not to help it plane out, just to help stabilize the boat in choppy water.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarWorth the money
by Robert from Austin, Texas on June 06, 2013
Easy to install and worked great the first time out. It was hard to get on plane when th boat was loaded with people and now its on plane much faster. I also notice a big improvement in steering at low speed.
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty StarWorks Great
by Scott from Fort Worth, Texas on September 05, 2012
Noticeable difference in plane out and steering control!!
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarMajor improvement
by Michael from Concord, California on August 02, 2012
This hydrofoil made a huge improvement. I use to not take my boat out unless the water was calm now I can take my boat out anytime.
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarSE 300
by Danny from Vincent, Alabama on July 16, 2012
I have used many types of hydro foils and always come back to the SE. It is strong looks like part of the motor and works great. I will continue to always purchase this product.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarWorks Better than Sting Ray Classic
by John from Apex, North Carolina on June 12, 2012
I bought a used 1990 Javelin 378 Fish and Ski boat with a 150 Johnson GT on it. The motor had a Sting Ray Classic hydrofoil on it when I bought it. Hole shot was good, but the boat still porpoised some and turned funny at speed. I decided to try the SE Sport 300 and I am glad I did! Hole shot is still good but steering at all speeds is better with the SE. Top speed also picked up 1 to 2 MPH with the SE. An added plus was the bolt pattern was exactly the same so I did not have to drill any more holes!
Was this review helpful?
Full StarFull StarEmpty StarEmpty StarEmpty StarNo Improvement
by Patti from Rolla, Missouri on September 27, 2011
After reading a lot of very positive reviews for the Sport 300 Hydrofoil I was excited about putting one on my 2005 Mercury 90 4 stroke motor. I was pleased with the installation, but saw no improvement whatsoever in performance. I'm sure it works most of the time, but not for me. Jim
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull StarGood Product
by Edward from Rose Hill, Kansas on August 11, 2011
Good product, quick shipping.
(0 of 2 people found this review helpful)
Was this review helpful?
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies
End of Summer Savings During our Huge Fall Boatful of Savings Sale - Stock Up Now & Save!