High Performance Hydrofoils streamlined for speed in two sizes
The SE Sport will improve handling and provide better maneuverability with a smoother ride
Features Turbo Trac to enhance thrust and control
Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot
Cuts planing time dramatically and keeps the boat on plane at lower speeds
Features on piece, high strength copolymer construction
Stainless steel hardware included
Attaches to cavitation plate
Works for both outboards and sterndrives that have a cavitation plate larger than 5 inches wide, usually 40 horse power and up.The SE Sport 200 is recommended for cavitation plates 5 inches or less.
Many Honda outboards are made with a center cavitation plate ridge. Some Hondas will require a slight cut or bigger notch in the "yoke" area of the foil. This is necessary to give 1/2" spacing between the rear holes to be drilled and the end of the cavitation plate. Cutting a notch can easily be handled with a small saw or grinder and will not affect the durability or warranty of the SE Sport.