This dual biocide product uses both copper and Irgarol to produce a most effective thin film antifouling. SR21 is designed for fresh water usage. This no-drag coating is easy to apply and dries in 15 minutes, ready to launch- instantly. Using a patented "solid lubricant" , fast was never this simple. Colors change after immersion.
All colors shown here are for guidance only. Due to differences in screen displays that are beyond our control the colors on these pages cannot be guaranteed to match the actual color in the can.
SR- 21 Antifouling Paint - Pettit Paint
|Product Type||Thin Film, Racing|
|Key Attributes|| •Super-slick racing finish for fresh water or cold saltwater boats |
•Dual-biocides control hard and soft fouling
•Ultra-thin film thickness prevents paint build-up with no sanding required
•Contains moly-disulfide & PTFE for reducing friction
|Technology & Formulation||Solvent Based, Thin Film|
|Substrates||Fiberglass, Wood, Steel, Lead, Bronze. (For more specific instructions per substrate, please refer to the product data sheet provided below.)|
|Mixing Instructions||Thoroughly mix - can be thinned up to 10% to ease application|
|Method||Short Nap Roller or Airless Spray|
|Application Temperature||40°F - 90°F|
|Number of Coats||3 initial; 1-2 in subsequent years|
|Recoating Information (Recoat/Relaunch)|| DRY TIME (HOURS): To Recoat / To Launch |
90°F: 5 / 30
70°F : 10 /60
50°F: 20 / 120
|Repaint Information||Pressure wash upon haulout, lightly sand, clean and reapply. (Refer to the Pettit Antifouling Compatibility Chart found below for more information.)|
SR21 Product Data Sheet PDF
Pettit Antifouling Compatibility Chart
MSDS for SR21 Blue*
MSDS for SR21 Bronze*
*Disclaimer:Information on this material is subject to change without notice. Please visit the corresponding manufacturer's website for updates.
PETTIT INTRODUCES SC-21, A NEW FRESH WATER SPEED COATING FOR BOAT BOTTOMS
SC-21 is an ultra-thin, super slick, low friction paint film for boat bottoms. It is the ideal racing finish for fresh water boats. SC-21 combines copper-bronze powder, Moly-Disulfide, and PTFE to produce a super-slick paint film that reduces surface friction allowing the hull to slide through the water. SC-21 is recommended for use on fiberglass, wood and properly primed steel boats. It is easy to apply and dries in 15 minutes. Color changes upon immersion.