Sahara Auto Bilge Pump 500, 750, 1100 GPH 12v -Attwood

Attwood Sahara Automatic Bilge Pump 500 GPH 3/4" Port 12v
Your Price: $48.15
Save: $26.64
(35% Off $74.79)
Part # 4505-7 ValueShip™ Eligible
Attwood Sahara Automatic Bilge Pump 750 GPH 3/4" Port 12v
Your Price: $69.36
Save: $18.63
(21% Off $87.99)
Part # 4507-7 ValueShip™ Eligible
Attwood Sahara Automatic Bilge Pump 1100 GPH 1-1/8" Port 12v
Your Price: $81.43
Save: $22.56
(21% Off $103.99)
Part # 4511-7 ValueShip™ Eligible
Attwood
Attwood Sahara Automatic Bilge Pump 500 GPH 3/4" Port 12v
Attwood Sahara Automatic Bilge Pump 500 GPH 3/4" Port 12v
Include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance.

Backed by Attwood's 3-Year Warranty!

Sized for boats up to approximately 17 feet. 500 GPH at open flow, 350 GPH at 3.3' head. Draws only 1.5 amps at open flow! 3/4" hose outlet. Sahara Bilge Pumps include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance. Backed by Attwood's 3-Year Warranty
Attwood Sahara Automatic Bilge Pump 750 GPH 3/4" Port 12v
Attwood Sahara Automatic Bilge Pump 750 GPH 3/4" Port 12v
S750 is sized for larger recreational boats. Our most powerful 3/4"-outlet automatic pump! 750 GPH at open flow, 625 GPH at 3.3' head. 3/4" hose outlet. Sahara Bilge Pumps include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance. Backed by Attwood's 3-Year Warranty!

Sahara Bilge Pumps include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance.

Attwood Sahara Automatic Bilge Pump 1100 GPH 1-1/8
Attwood Sahara Automatic Bilge Pump 1100 GPH 1-1/8" Port 12v

S1100 is our most powerful and efficient automatic pump.

  • High capacity for larger boats and yachts.
  • 1100 GPH at open flow, 973 GPH at 3.3' head. 1-1/8" hose.

OutletSahara Bilge Pumps include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance. Backed by Attwood's 3-Year Warranty!

Sahara Bilge Pumps include 36" lengths of 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance.

Based On 4 Reviews | Write Review
Auto bilge pump
by Wade from Omaha, Arkansas on August 23, 2014
Works like a charm and it's matches my old one. Very easy to install.
Was this review helpful?
Sturdy Little pump
by John from Mclean, Virginia on June 12, 2012
The built-in float switch works well. has held up so far in rather rugh conditions.
(2 of 2 people found this review helpful)
Was this review helpful?
Sahara, keeping me dry.
by Robert from Laurel, Delaware on March 04, 2012
I purchased this product as a replacement for the original Attwood bilge pump that was installed by the boat manufacturer. The old,original pump was 12years old. installation instructions for the Sahara were easy to follow and complete. The new pump works great, my decks are perfectly dry now and the bilge area is kept water free. Thanks.
(3 of 3 people found this review helpful)
Was this review helpful?
bilge pump
by James from Mansfield, Ohio on February 05, 2012
One of the better small pumps I have seen and tried. As with all the things nowdays, it seems a little expensive but considering all the others, I settled on this one. It pumps well, and the auto feature is worth the extra price, that way, you do not have to install a extra float which takes up more space. For a small section of a boat, this is fine. Use a bigger one back in the transom though, where most water runs to. If you spring a leak, you want something bigger than this one.
(8 of 9 people found this review helpful)
Was this review helpful?
Based On 1 Review | Write Review
Just what I needed
by Mike from Erlanger, Kentucky on June 25, 2014
perfect fit for my boat. 18.5' runabout.
Was this review helpful?
Based On 3 Reviews | Write Review
Love This Pump!
by Patrick from Beaufort, South Carolina on August 16, 2014
It was easy to install and works like a charm. I purchased it to replace a Rule-Mate that had quit working on automatic. Presumably, the "high Tech" switch failed but how and why and, most importantly, there is no way to remedy the problem. I was delighted and relieved to find the Atwood has a float switch when I received it. If it fails on automatic, I'm pretty sure it will be a simple thing to clear any debris that might be fouling the switch so it will work again. Of course, if I keep the bilge clean, there should be no reason for the float switch to fail.
Was this review helpful?
GOOD for the price
by ROY from MARMET, West Virginia on September 14, 2013
This is the second on of this model I have had , the first was a great pump. I gave it a 4 out of 5 only because it had trouble handling bleach water we cleaned the boat deck with . This caused the plastic to have problems crack open then water killed it .....
(1 of 1 people found this review helpful)
Was this review helpful?
5 Yesars still works great
by John from ATASCADERO, California on July 15, 2010
sometimes this pump would set under old dirty water for months I have a new one to go in as soon as cthis one stops
(2 of 3 people found this review helpful)
Was this review helpful?
Q:
Will gas in water affect it?
Q:
Will a dishwasing detergent such as "Joy" in the water affect it?
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies