SeaStar Solutions
Price: $184.62
Save: $104.38
(36% Off $289.00)
Part # 65481P
2nd Day Air for $2.99 More Eligible
Price: $237.95
Save: $133.05
(35% Off $371.00)
Part # 65485P
2nd Day Air for $2.99 More Eligible
Price: $80.12
Save: $44.88
(35% Off $125.00)
Part # 59703P
2nd Day Air for $2.99 More Eligible
Price: $65.42
Save: $36.58
(35% Off $102.00)
Part # 59704P
2nd Day Air for $2.99 More Eligible
Price: $65.42
Save: $36.58
(35% Off $102.00)
Part # 63076P
2nd Day Air for $2.99 More Eligible
Hurry! Only 1 left in stock
No Reviews
Price: $29.83
Save: $16.76
(35% Off $46.59)
Part # 59705P
2nd Day Air for $2.99 More Eligible
No Reviews
Price: $29.43
Save: $16.46
(35% Off $45.89)
Part # 59706P
2nd Day Air for $2.99 More Eligible
Price: $29.94
Save: $16.75
(35% Off $46.69)
Part # 59707P
2nd Day Air for $2.99 More Eligible
Price: $29.94
Save: $16.75
(35% Off $46.69)
Part # 59709P
2nd Day Air for $2.99 More Eligible
Price: $61.82
Save: $42.18
(40% Off $104.00)
Part # 69870p
2nd Day Air for $2.99 More Eligible
Price: $30.14
Save: $16.85
(35% Off $46.99)
Part # 59708P
2nd Day Air for $2.99 More Eligible

If you are looking for high-quality instruments for your boat, go for SeaStar Sahara Signature Series Gauges. They are available as individual units as well as kits to meet different requirements. These instruments can be used on gasoline-powered inboards as well as outboards and stern drives. To jazz up your dashboard, you can go for the optional square or eyebrow bezel.

  • Tan dial with black graphics
  • Fire orange tipped pointer
  • Read-through dial

Sahara Signature series gauges have tan dials with black graphics and fire orange pointer tip. The read-through dial and perimeter lighting allow you to comfortably check the measurements anytime. The dial is covered by a dome-shaped glass that easily sheds water and provides optimum protection from wind, dust and water.

Features of SeaStar Sahara Signature Series Gauges:

  • Available as kits and individual units
  • Tan dial with black graphics
  • Fire orange tipped pointer
  • Read-through dial
  • Scratch-resistant dome-shaped glass
  • Perimeter lighting

Specifications:

Manf. Part # 65481P

  • Sahara 4-gauge Set
  • Includes speedometer, tachometer, fuel gauge, voltmeter

Manf. Part # 65485P

  • Sahara 6-gauge Set
  • Includes speedometer, tachometer, voltmeter, water temperature gauge, oil pressure gauge

Manf. Part # 59703P

  • Tachometer
  • RPM: 7K
  • Outboard & Inboard/Outboard
  • Size: 3"

Manf. Part # 59704P

  • Speedometer
  • Range: 10 - 65MPH
  • Size: 3"

Manf. Part # 63076P

  • Speedometer
  • Range: 20-80 MPH
  • Size: 3"

Manf. Part # 59705P

  • Oil pressure gauge
  • Range: 0-80PSI
  • Sender required

Manf. Part # 59706P

  • Water temperature gauge
  • I/O, I/B
  • Range: 120-240º F

Manf. Part # 59707P

  • Fuel gauge
  • Sender required
  • Range: E-1/2-F

Manf. Part # 59709P

  • Trim gauge
  • Fits Merc.
  • Sender required

Manf. Part # 61870P

  • Water Pressure Kit
  • Outboard
  • 30PSI

Manf. Part # 59708P

  • Voltmeter
  • Range: 8-18 VDC
  • Size: 2"
Full StarFull StarEmpty StarEmpty StarEmpty Star
Glass Glare
by James from Rainbow Lake, Alberta on July 24, 2013
I find that the convex glass reflects light from all different directions makeing it difficult to read the guages. I find I have to move my head around to change the glare angle to be able to read the guages. It's a pain in the butt. I wish I had never bought them.
(7 of 9 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Based On 3 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
great experience
by James from Oakley, California on January 30, 2014
will order from iboats again when needed
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarEmpty StarEmpty Star
it works
by Jerry from Macedon, New York on September 30, 2012
I put this on a 15 hp Mercury. I had to make adjustments on the back of the unit to get it to be somewhat close to accurate. It was hard to figure out how to set it for a two cylinder motor. Instructions not clear. Tech support was good once I got transferred to the right person.
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Tach
by Ken from Dryden, Ontario on August 02, 2011
Very happy with tach.
(4 of 9 people found this review helpful)
Was this review helpful?
Average Customer Review for Speedometer, 65MPH, 3" - SeaStar Solutions
Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Speedometer
by Ken from Dryden, Ontario on August 02, 2011
Very happy with product.
(0 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Based On 2 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
trim gauge merc
by Ronald from Syracuse, New York on July 09, 2017
Got this gauge to replace the old one in my boat that didn't work anymore. I was surprised that the gauge was almost the exact same thing considering the boat is a 98. The only difference was the needle the new on has a black needle with red tip where old one was a white needle.Hook up was the same as the old one. I would differently buy more as needed.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
A++
by Johnnie from LA Vernia, Texas on February 01, 2012
Amazing...
(1 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarEmpty Star
Teleflez
by Patrick from Brighton, Colorado on June 07, 2013
perfect match, a little high in the pricing
(1 of 2 people found this review helpful)
Was this review helpful?
Average Customer Review for Voltmeter, 8-18 VDC - SeaStar Solutions
Full StarFull StarFull StarFull StarFull Star
Based On 4 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
sea-ray replacement volt gauge
by Ronald from Syracuse, New York on July 13, 2017
a great replacement identically the same as old one it replaced.Only difference is old gauge had a white needle where new one has black with a red tip which seems easier to see. Hookup is same as old one and the boat is a 98. I will buy other gauges as needed and they work well.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
so far so good...
by Steven from Tulsa, Oklahoma on May 08, 2015
Quick delivery, great price,easy to install and works like it's supposed to.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Works as advertised
by Jeff from Ventura, California on July 28, 2014
Installed in minutes and works perfectly. Now I want to replace the rest of my gauges.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
satisfied customer
by Wayne from Sault Ste. Marie, Ontario on June 13, 2012
would purchase the products from this mfgr again
(0 of 1 people found this review helpful)
Was this review helpful?
Q:
Will this work with existing sending units on a 2004 baja with 496 engine?
A:
This is a universal set that is made to work as long as the measurements match up.


Q:
Could I swap out the oil press. for a trim in the 6 guage set?
A:
Unfortunately SeaStar doesn't sell a set in this series with a trim gauge. It is packaged this way and therefore we cannot swap it out.


Q:
I have a 79 searay v-240, are the red, white, and blue 6- gauge set usable for inboard/outboard like my boat? Can I get a single trim gauge for mercruiser 228 in red white blue to match 6 gauge set?
A:
The Trim Gauge for the Saraha series is 59709P. Also, yes this is designed for I/O applications.


Q:
What size hole does each of the guages take?
A:
The speed and tach are 3 inches. The fuel, volt, water temp and oil pressure are 2 inches.


Q:
Will this tach work om my Yamaha 2008 90 HP outboard?
A:
Yes it will. You will just need to make sure the size will work for you.


Q:
Is this a 2 wire system, ground and positive coil wire? My old gauge just had one wire to the plus side of coil and a ground wire from a mounting post.?
A:
This tachometer has a 4 wire system. It has a spade, ignition, ground and sender terminal.


Q:
Does this unit have a back light?
A:
Manufacturer confirms it has a red thru-dial lighting.


Q:
Does this include wiring?
A:
This product only includes the gauge and an instruction sheet on how to install it.


Q:
Will this tach work on my 2008 merc 25hp 4S?
A:
Yes


Q:
Will this work on a 1982 johnson 115 v4 2stroke?
A:
Yes


Q:
Will this work with my 1982 Mercury 3cyl 70hp?
A:
This is a universal gauge, you'll need to measure your mounting hole to see if it's 3" or 4" and see if your original has the 7k limit.


Q:
Will this tach work with my 2004 Johnson 115 FI motor?
A:
It's universal in its design. You just hook it up with the tach harness for your engine.


Q:
Looking to replace a Teleflex P/N 58401 fuel gauge no longer made. This looks similiar . This a replacement ?
A:
There is not a listed direct replacement for that number. This is a 2 inch gauge and requires an industry standard sending unit.


Q:
Is the gauge tan?
A:
Yes.


Q:
My boat has a plug to plug into the gauge dose this gauge can I get a pic of the back of the gauge?
A:
We don't have a back picture, but the sender code requires "F" as most fuel gauges do.


Q:
What size are the Tach and Speedo on the Sahara Signature series?
A:
They are 3 inch gauges.


Q:
I have a 1978 mercruzer 140. Will this gauge work?
A:
Yes this gauge will work for Mercruiser. It is a 2 inch gauge.


Q:
Says it needs a "sender" where do I get one and where does it go?
A:
The sender for outdrives and some outboards is 18-7633.


Q:
Will this work for my 1994 alumacraft trophy 190?
A:
These are universal in design. So yes it will work you just need to use your sender.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies