Seadog Illuminating Contura Switch

Illuminating Contura Switch Rocker SP On/Off, 4-Terminal - SeaDog Line
Your Price: $11.16
Save: $2.34
(17% Off $13.50)
Part # 420211-1 ValueShip™ Eligible
Illuminating Contura Switch Rocker SPDT On/Off/On, 4-Terminal - SeaDog Line
Your Price: $15.08
Save: $3.17
(17% Off $18.25)
Part # 420213-1 ValueShip™ Eligible
No Reviews | Write Review | Ask Question
Illuminating Contura Switch Rocker DPDT On/Off/On, 7-Terminal - SeaDog Line
Your Price: $17.77
Save: $3.73
(17% Off $21.50)
Part # 420218-1 ValueShip™ Eligible
Seadog Line

Planning to install switches in your boat? Go for the Illuminating Contura Switches exclusively made for marine environments. Made of stamped brass/injection molded nylon and polycarbonate, these rocker switches are highly corrosion resistant. Plus, their ignition protection and water resistant features add to the safety and durability.

When you turn the switch ON, it lights up in red. So, you’ll easily be able to check if the particular electrical accessory is switched on even from a distance. These switches come in different configurations, such as SPST, SPDT and DPDT to meet the different switching installation requirements.

  • Stamped brass/injection molded nylon and polycarbonate construction
  • Ignition protected and water resistant
  • Illuminates red in ON position

Features of Seadog Illuminating Contura Switches

  • Made of stamped brass/injection molded nylon and polycarbonate construction
  • Water resistant
  • Single pull circuit


Manf. Part # 420211-1

  • Circuit: SPST
  • Action: On/Off
  • Terminals: 3 blades
  • Amps: 20 A
  • Volts: 12 V
  • Dimension: 13/16" x 1-7/16"

Manf. Part # 420213-1

  • Circuit: SPDT
  • Action: On/Off/On
  • Terminals: 4 blades
  • Amps: 20 A
  • Volts: 12 V
  • Dimension: 13/16" x 1-7/16"

Manf. Part # 420218-1

  • Circuit: DPDT
  • Action: On/Off/On
  • Terminals: 7 Blades
  • Amps: 20 A
  • Volts: 12 V
  • Dimension: 13/16" x 1-7/16"

  Wiring Instructions for Illuminating Contura Switches

Solid Product, Easy to Install
by Karl from Williamsburg, Virginia on May 15, 2013
I used this to replace an identical, original switch on my 2004 Sea Pro. It was very easy to pop out the old switch and push this one into the space. Three blade connector slides later, a working switch.
Was this review helpful?
Contura Switch
by Michael from Prattville, Alabama on March 22, 2013
I bought this switch to replace a factory supplied Carlson switch that failed after 10 years of service. The Contura model fit exactly and is working perfectly.
Was this review helpful?
On Time Delivery - Works
by Gregory from Anderson, Indiana on June 19, 2011
The switch arrived within a few days of ordering and it works. Like any product you purchase its durability and reliability will be based over years of use. The key when installing this product is measuring twice and cutting the dash panel only once.
(3 of 3 people found this review helpful)
Was this review helpful?
Wiring Diagram
by Paul from Brunswick, Georgia on April 29, 2013
For someone that knows how to wire a boat these are great switches and I highly recommend them. If you don't know how contact tech service at SeaDog they will help you. Once switches are hooked up and working you'll be happy you purchased the best.
Was this review helpful?
Is this switch for anchor/running lights?
This is only an off/on switch and is not used for anchoring. If you are looking for a navigation anchor set up, please see part #420218-1 listed on this page:
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies