Seasense Automatic Bilge Pump 600, 800 GPH 12v

Seasense Bilge Pump with Switch 600 GPH 3/4" Port 12v
Your Price: $24.58 (Out of stock)
Save: $4.41
(15% Off $28.99)
Part # 50010423
Seasense Automatic Bilge Pump 800 GPH 3/4" Port 12v
Your Price: $44.27
Part # 50010425 ValueShip™ Eligible

Tough enough to tackle any bilge, the SeaSense Automatic Bilge Pump offers an efficient solution to draining your boat’s engine compartment. Its high-quality ABS housing ensures impact resistance and long time use. This bilge pump is designed to meet ABYC specification H-22.

  • Includes float switch
  • ABS housing
  • Ignition protected

This submersible bilge pump has a universal strainer base that can be easily removed for cleaning. Its built-in float switch ensures convenient automation. This pump comes with all the necessary mounting hardware for installation.

Features of SeaSense Automatic Bilge Pump

  • Impact-resistant ABS housing
  • Built-in float switch
  • Quick-release strainer base
  • Ignition protected
  • Stainless steel shaft
  • Mounting hardware
  • Universal mounting hole positions Meets ABYC specification H-22
  • Certified flow rates
  • Specifications for 600 GPH model
    Manf.Part # 50010423
    3-year warranty
    30" tinned marine grade wire leads
    Output: 600 GPH
    Hose size: 3/4-inch

    Specifications for 800 GPH model
    Manf.Part # 50010425
    30" tinned marine grade wire leads
    Output: 800 GPH
    Hose size: 3/4-inch

    Seasense Bilge Pump with Switch 600 GPH 3/4" Port 12v
    Seasense Automatic Bilge Pump 800 GPH 3/4" Port 12v
Based On 3 Reviews | Write Review
great performance
by Richard from Harwinton, Connecticut on September 12, 2013
our local marina quoted $6000 to solve our problem by buying a lift at our dock. A simple solution for our problem. Thanks
(0 of 1 people found this review helpful)
Was this review helpful?
Great Product at a Reasonable Price
by James from Dedham, Maine on September 28, 2011
Just what I needed for 25 bucks (including shipping). I have consistently found what I need at iboats for the best price. Thanks iboat!
(4 of 5 people found this review helpful)
Was this review helpful?
A great pump that won't drain your wallet
by Ray from London Mills, Illinois on September 15, 2011
Not much to say except that everything works like it is supposed to. The pump is fairly quiet and this pump which includes the float switch is bargain priced. Thanks!
(4 of 5 people found this review helpful)
Was this review helpful?
Based On 6 Reviews | Write Review
seasense automatic bilge pump 800 gph
by Mike from Roanoke, Indiana on July 26, 2014
Works great! Just make sure when installing not to let the pump hose lay lower then the outlet on the pump or the system will airlock and stop pumping.
Was this review helpful?
Works but float is too high
by Wilbur from Crossville, Tennessee on May 31, 2013
Works great IF there is enough water for the float to get high enough to turn it on. I needed a pump the would keep the bilge mostly dry like the one I replaced. Didn't happen. May have to get a separate float to make this work the way I need it to.
Was this review helpful?
by Raymond from Willow Spring, North Carolina on May 29, 2013
great pump for the cost...Will get another one if needed..
Was this review helpful?
Great Seasense pump
by Lee from Heber Springs, Arkansas on October 30, 2011
I tried all the bildge pumps that will fit my very limited space on my sail boat and this one works the best. The built in float switch is a savior. It keeps the bilge water level below the the pump motor which has always been my cause of pump failures. I just this last week had to replace the first one with my spare. Oil in the water caused the float to not operate freely. Cleaning fixed it the pump is as good as new.
Was this review helpful?
Seasence Auto Bilge Pump
by John from Westbank, British Columbia on August 23, 2011
Just received the pump last week. Haven't had time to install but I think it is going to be just fine. Very compact, will be easy to install.
Was this review helpful?
800 GPH Auto Bilge Pump - Seasense
by Kelly from St. Helens, Oregon on July 15, 2011
I can only give this a 4 for now due to the fact that it has not been needed to pump out the boat. I will say that the service and shipping for the item was great and very timely. I will order more parts from iboats in the future.
(0 of 2 people found this review helpful)
Was this review helpful?
Ask a question for
Question & Answer Guidelines
This product ships in 1 business day.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies