ShoreMaster Boat Cover Upgrades

Port-side Trolling Motor Mount Upgrade
Your Price: $25.00
Save: $10.00
(28% Off $35.00)
Part # PORT-TROLL-UPGRADE ValueShip™ Eligible
Starboard-side Trolling Motor Mount Upgrade
Your Price: $25.00
Save: $10.00
(28% Off $35.00)
Part # STAR-TROLL-UPGRADE ValueShip™ Eligible
Port-side Transom Mounted Kicker Motor Upgrade
Your Price: $20.00
Save: $5.00
(20% Off $25.00)
Part # PORT-KICKER-UPGRADE ValueShip™ Eligible
Starboard-side Transom Mounted Kicker Motor Upgrade
Your Price: $20.00
Save: $5.00
(20% Off $25.00)
Part # STAR-KICKER-UPGRADE ValueShip™ Eligible
No Reviews | Write Review | Ask Question
Shoretex Fabric

Trolling Motors: If the trolling motor has a detach plate, it is best to remove the trolling motor when using the cover. In which case the cover can be ordered without the trolling motor modification.

Motor Hoods: Upon check out please enter the following information about your engine or we will default to the largest engine that your boat is rated for:

  • Engine Manufacturer
  • Horsepower
  • 2 or 4 Stroke
Average Customer Review for Port-side Trolling Motor Mount Upgrade
Based On 18 Reviews | Write Review
Trolling motor reinforcement
by Anthony from Middleburg Hts, Ohio on October 16, 2014
Was this review helpful?
by Ricky from Kankakee, Illinois on September 15, 2014
Good coverage for the t-motor
Was this review helpful?
Boat Cover
by Christopher from Gardiner, Maine on September 11, 2014
Cover seems to be made with quality material however I am unsure how long it will last as certain pressure points may ruin the cover like where the seats are. As of right now, no complaints.
Was this review helpful?
Port-side Trolling Motor Mount Upgrade - ShoreMaster
by Donald from Cottage Grove, Minnesota on September 04, 2014
Im so happy with upgrade a MUST HAVE cover fits my boat PERFECTLY
Was this review helpful?
No real happy
by William from Allouez, Michigan on August 01, 2014
I ordered online after speaking to customer service about the boat cover. When the cover arrived I find it was not designed to accommodate the windshield. After checking with customer service I was told that they did not have a "custom" cover for my boat, so I got a best fit model. I went back online and according the website they definitely list a "custom" cover for my boat model. The cover I have is ok but fits sloppy.
Was this review helpful?
Port Side Trolling Motor Upgrade
by Clifford from Dadeville, Alabama on July 10, 2014
The trolling motor upgrade is essential for a good fit. Is definitely worth the price.
Was this review helpful?
Little Uneasy but Satisified
by Jonathan from Shakopee, Minnesota on July 08, 2014
I was a little uneasy ordering the extra trolling motor upgrade, since it was non-returnable if I didn't like it, but it's great. I can't fathom the idea of taking the motor off the rail each time I need to cover my boat. It has all the extra material in the right place where you need it and it fits perfect. I put this on my 2000 Crestliner fish hawk and its great. Don't hesitate like I did. A+++
Was this review helpful?
Needed upgrade
by Francis from Birmingham, Alabama on July 07, 2014
The portside trolling motor upgrade really helped to give my boat cover a tight fit. It was a needed upgrade and I am happy I made the purchase.
Was this review helpful?
cover upgrade
by Thomas from Berwick, Maine on June 13, 2014
Done well!
Was this review helpful?
Doesn't fit our trolling motor well
by Jeffery from Cedar Rapids, Iowa on June 01, 2014
We have a Minn Kota Terrova trolling motor, which is not an unusual size or anything, but the pocket in this cover doesn't fit it at all. I expected a little more structured pocket in the cover, but it appears that just left a little extra fabric in the port side of the cover and randomly sewed in an extra layer of fabric in two spots. Unfortunately, the two spots where they added the extra fabric doesn't match either the head or prop on my trolling motor, so we had to pad them ourselves with foam rubber.
Was this review helpful?
boat cover
by George from Raymond, New Hampshire on May 27, 2014
My last Shoremaster boat cover purchased 6 years ago had the outboard motor hood sewn directly to the boat cover. It was part of the boat cover. This hood was completely separate. Nothing on your website nor ShorMaster's website stated that it was unattached. I expected it to be part of the boat cover and it was not. Also the reinforcement area for the front cleats are not in the correct position. They do not reinforce the cover at the cleats or gas filler.
Was this review helpful?
Lund 16' boat cover
by a Customer from Pinckney, Michigan on July 08, 2013
The cover I received was made for a 17' boat, and not a 16' boat. The model name for my boat clearly defines a 16' boat, "Lund Rebel 16 SS Adventure". The boat registration also states 16'. I paid $37.50 for return shipping, for their mistake.
Was this review helpful?
poor fit
by Gary from North Richland Hills, Texas on June 29, 2013
Not nearly enough room allowance for my trolling motor. Made to bow fit too short. They also shorted me 2 tiedown straps. I had to run all over town to find the appropriate tiedown straps. Definitely look to another source for a mooring cover. The fit was only slightly better than a universal fit cover that can be purchased for significantly less money
Was this review helpful?
very sloppy fit
by Ronald from Sunnyvale, Texas on June 28, 2013
This is far from fitting my trolling motor. There is no extra padding to keep motor from tearing thru in stress points.not at all custom. Seams on cover are sloppy and not straight in the middle of the boat. Far from a custom cover that it is supposed to be
Was this review helpful?
Boat Cover
by William from Warren, Michigan on April 29, 2013
This seems to be a quality boat cover. It has a VERY tight fit. I'm still stretching it, after a couple weeks, to get the last corner just right.
Was this review helpful?
Cover for tracker tv18
by Robert from Coppell, Texas on January 20, 2013
This is my 2nd cover. The fit is excellent. I added the vent and pole. Breathes and sheds the rain great. Will see how it performs during the Texas summer.
Was this review helpful?
ShoreMaster Cover with upgrade
by Walter from Springfield, Pennsylvania on December 26, 2012
Great cover that was easy to install. Fit my boat nicely and was very light.
Was this review helpful?
Review for Port-side Trolling Motor Mount Upgrade - ShoreMaster
by a Customer on July 27, 2009
(1 of 6 people found this review helpful)
Was this review helpful?
Based On 2 Reviews | Write Review
Need to send instructions
by Kevin from Hanover, Pennsylvania on June 13, 2014
When unpacked the boat cover I as pleased and impressed with the look and quality of the product. It is much thicker and nicer than the one I replaced . It was a bit disappointing to find that there were no instructions of any kind packaged with the cover. This sounds simple, but without instructions we do not know why we received what appear to be 2 outboard motor covers. We installed the cover as we thought best and then found that we had several points on the boat where the tie down straps were not long enough to secure them to the trailer. Also, when we put the cover on the first time we discovered that there were two more tie down loops on the cover than there was tie down straps. My wife is a decent seamstress and bought material and clips to make the longer straps and to reach the longer tie down points. The cover looks nice and does a great job of protecting my boat from the weather. It just would have been nice to have all the straps and have straps that were sufficiently long.
Was this review helpful?
by Dave from Nashua, New Hampshire on June 08, 2014
Excellent quality and fit.
Was this review helpful?
Based On 3 Reviews | Write Review
great fit
by Colleen from Curtice, Ohio on June 25, 2014
Well constructed and perfect fit. Just wish it came with straps.
Was this review helpful?
No 'Upgrade' Was Included In My Cover
by Jordan from Calgary, Alberta on September 03, 2013
I paid extra to have a port-side kicker modification sewn into my custom boat cover. While I will say that the cover fits well, it was not modified, nor is it different from the starboard side in any way. I had to remove the kicker motor, as well as the mounting plate from the transom in order to get the cover to fit he boat properly. I wouldn't be super disappointed that this 'upgrade' was missed, left out or otherwise simply neglected to be a part of my order, other than the fact that I was charged and had paid for it. Overall, the cover is not a whole lot better than a generic one that you can get from the shelf at Bass Pro, yet is almost triple the cost. Disappointed in the purchase in general, and would like a refund for my 'upgrade' that was overlooked.
Was this review helpful?
Wrong product sent
by Harry from Calgary, Alberta on June 19, 2013
I did not get what I ordered. IN the process if returning the Boat cover
Was this review helpful?
Ask a question for
Question & Answer Guidelines
This product ships in 6 business days.

Add to Cart and enter your Postal Code to determine the shipping charges and estimated delivery date.
* Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies

Please be careful when ordering this product, it has limitations that differ from our General 30-day Return Policy. After all, we want you to be satisfied with your order so you'll return again and again as an customer, and to also recommend us to your boating friends

Custom Boat Covers

Custom boat covers (including Odd-Lots, Liquidations, Closeouts, and In-Stock Specials) are non-returnable unless an error was made by or by the boat cover manufacturer. If an error was made by or the boat cover manufacturer, the cover must be returned in clean and resalable condition otherwise the return will be denied.

Please make sure you select the correct make, model, year or style and length of your boat before ordering. After all, we want you to be satisfied with your order so you'll return again and again as an customer, and to also recommend us to your boating friends.

Please note that each boat cover manufacturer may have additional requirements concerning product returns or warranty claims, including but not limited to: restocking fees, shipping fees, or product order change fees.

Because boat covers are "made-to-order", there will be a $25-$50 fee for any boat cover order cancellation after 1 business day of purchase, as the cover has already gone into production.

Warranty Policy

30 days after the purchase date, the manufacturer of the product(s) will need to be contacted for a warranty claim.

Returns for Canadian Customers

Canadian customers, please be careful when placing your order; does not accept any return merchandise on Canadian orders unless the merchandise you received was defective, damaged, or an error was made by In such cases, please contact Customer Service within 30 days of the original shipping date for a return authorization number. Returned items that do not have a RA # will not be accepted.

See our complete return policy.