Skeggard
SkegGard with Skid Plate 99003 - Skeggard
Price: $74.07
Save: $15.92
(17% Off $89.99)
Part # 99003
2nd Day Air for $2.99 More Eligible
This item is found in the following Product Families
Average Customer Review for SkegGard with Skid Plate 99003 - Skeggard
Full StarFull StarFull StarFull StarFull Star
Based On 16 Reviews | Write Review
Full StarFull StarFull StarFull StarFull Star
Great product
by Preston from Dallas, Georgia on June 20, 2017
Skeg guard slides right on works perfect
(3 of 3 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Good looking well made
by Wootaek from Warren, Pennsylvania on April 25, 2017
Well designed, manufactured good looking product.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
clean
by Duane from Anderson, Indiana on October 30, 2016
easy to install with a clean appearance!
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Skegguard 99003
by Dennis from Amboy, Indiana on August 28, 2016
Saved my but a couple of times. Very well made and looks and works great. High quality stainless and made in the USA. What more could you ask for. Great price on iBoats site!.
(3 of 4 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Great!
by Victor from Lexington, South Carolina on July 24, 2016
This product was real easy to install and it looks great, thank you!
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
this skeg guard installed realy easy and looks good when installed.
by Ray from Plain City, Ohio on October 23, 2015
This skeg guard is well built and made to install really simple. Would recommend to anyone if they would need one.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
skeg guard
by Stuart from Kaleden, British Columbia on September 09, 2013
hope it works not hit anything yet but fits fine
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Seg guard
by Elaine from Laramie, Wyoming on August 24, 2013
Saved me a bunch, looks great and works perfect
(1 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarEmpty Star
Easy install, looks great
by Rosemary from Cascade, Idaho on August 06, 2013
This is just as advertised. It was dead simple to install, and looked great on. Performance was good in the water. I noticed that it can grab weeds and such along the sides of the skeg so look out for that when you pull out.
(2 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Skeggard
by Ed from Evans, Georgia on June 12, 2013
Product was as advertised. Very satisfied.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
SkegGard
by Alfred from Fremont, California on September 24, 2012
Great condition when it arrived and went on smoothly following directions.
(0 of 1 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Skeggard
by Michael from Cleveland, Missouri on August 08, 2012
Very pleased with the product and the delevery of it. I bought the gard not to fix a broken skeg but to protect the one that is there. It also looks very nice on the Pontoon's outdrive "a little class".Product is so simple to install almost any person can do it, I would recommend this product to any body with an sterndrive or outboard!
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Skeggard
by Henry from Conway, Arkansas on July 12, 2012
Product was easy to install and has performed well.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Skeg Gard Skid Plate
by Marshall from Spring Hill, Florida on July 11, 2012
Easy to install. Looks good on the boat. The gulf is skegs, this not only dressed up the chewed up area but added substantial strength. Took all of fifteen minutes to install. All you need is a drill and drill bit.
(1 of 2 people found this review helpful)
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Skegguard
by Lawrence from Calgary, Alberta on April 29, 2012
The skegguard installed very easily. However, the supplied LOCKTITE will not set up, and is useless.
Was this review helpful?
Full StarFull StarFull StarFull StarFull Star
Skeggard
by Michael from Mississauga, Ontario on June 10, 2011
Product looks great, installed in 5 mins..I recommend it.
(5 of 5 people found this review helpful)
Was this review helpful?
Q:
Does this fit a Alpah 1 Gen 1 skeg?
A:
The skeg that will work for you outdrive is Part # 99002.


Q:
Will this fit 2011 bayliner with a 3l mercruiser?
A:
Yes this works with Mercruiser Alpha One, Gen II outdrives 1991-2015.


Q:
Will one size fit all motors?
A:
No. They are sized by engine manufacturer, year and horsepower.


Q:
Do they have one to fit a 2001 Mercruiser 5.7 Bravo 3?
A:
If you are installing a Skeggard on this gearcase for the first time and have not yet drilled the mounting holes. Order part number 99005A. If your gearcase does have existing holes from a previous installation please measure the distance (center to center) between the holes. If it is 6.25 inches you can still use 99005A. If it is 4.50 inches then you will need to contact manufacturer.


Q:
I have a I/O Volvo SX Outdirve what Skags will work with this outdrive?
A:
If your year is 1995-2006 then you need part number 99022. If you have a 2007-2015 you will need part number 99020.


Q:
Which model do i need for a 1989 bayliner with the king cobra stern drive?
A:
If you have a Cobra V6 or V8 then you need part number 99008. If you have a Cobra 4 cylinder then you need part number 99010.


Q:
My skeg broke off at an angle with the largest portion remaining on the front (angled end) of the skeg. I do have the required 2 inches of skeg remaining, but not for the last 3 inches from the end closest to the prop. Do I have enough of my old skeg left to properly install a Skeggard?
A:
Best thing to do is give us a call so we can set up you sending us a picture. This is the only way we can determine if there is enough.


Ask a question
Question & Answer Guidelines
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies