Snow White Perfection Top Side Boat Paint, Quart - Interlux
Price: $65.08
Save: $26.91
(29% Off $91.99)
Part # YHB000KIT/QT
2nd Day Air for $2.99 More Eligible
SHIPS TOMORROW!* if ordered in 14 hrs 23 mins.
This item is found in the following Product Families

Perfection® is a high-gloss two-part polyurethane finish. Its high-performance formula combines a long lasting abrasion and chemical resistant finish with superb protection from the detrimental effects of UV. Its abrasion resistance makes it ideal for application to decks and gunwales. Perfection can be used anywhere above the true waterline on properly prepared fiberglass, wood, aluminum, steel and epoxy. The superb high gloss characteristics, long lasting color retention and effective resistance to abrasion makes Perfection the finest coating currently available. Professional quality results are made easy using Perfection.

  • Ultimate performance 2-part polyurethane finish
  • Professional quality results made easy
  • Highest gloss & highest abrasion resistance
  • Unique UV protection for longest-lasting color and gloss

Technical Specifications
Area: Above the waterline
Finish/Sheen: High Gloss
Substrates: Aluminum
Carbon Fibre
Suitable for Aluminum: Yes
Number of Coats: 2-3
Application Method: Brush
Conventional Spray
Application Method Recommended
No. of Coats
Practical Coverage
(sq. ft/Gal)
Brush 2-3 488 Y2333N
Conventional Spray 2.5-3 488 YTA920 Y2316N
Roller 2-3 488 Y2333N
Two-Part Premium Paint Systems
These systems provide the maximum level of protection available.
Fiberglass Aluminium
Wood Steel
How Much Topside Paint Do I Need?
Determining how much paint you will need is fairly simple. To determine how much topside paint you will need, refer to the reference chart below.
How Much Topside Paint

Full StarFull StarFull StarFull StarFull Star
Based On 1 Review | Write Review
Full StarFull StarFull StarFull StarFull Star
Follow the directions and you'll see amazing results
by Barton from Malta, New York on April 09, 2016
I've used this product on a restored early seventies fiberglass/mahogany cruiser that I've restored over the past few years. In a word, it is - amazing. Pricey? Yep. But in this case you get what you pay for. Preparation is key to getting good results. Perfection levels out very nicely, that means it will show any flaws in the underlying surface. If you do your prep work and mix/apply this product exactly as instructed by the manufacturer, you'll be very pleased. I've seen people have problems in applying this paint. They always make one of two mistakes. They thin the paint too much, or they try to apply too much paint. Either of these errors will cause runs. Perfection needs little thinning and thin coats are critical. Use 1/4" solvent resistant foam rollers and thin coats. Assuming you've primed the surface properly two thin coats of Perfection should do it. Occasionally three. Thin coats.
(1 of 1 people found this review helpful)
Was this review helpful?
This product ships in 1 business day.
Add to Cart and enter your Postal Code to determine the shipping charges.
Most products and orders leave our warehouse in 1 business day. However, select items may take more processing time. Alaska and Hawaii orders please add 1 additional warehouse processing day.
Standard Shipping Policies